Overpower

The AMD Ryzen 5 5600G paired with the NVIDIA GeForce RTX 4060 delivers a playable but scaling-sensitive experience in Overpower. The data shows a significant performance cliff when moving from 1080p to 4K, particularly at higher settings, indicating that the GPU becomes the dominant bottleneck at higher resolutions while the CPU remains capable at lower ones.

Resolution Scaling

The performance drop from 1920x1080 to 3840x2160 is steep and consistent across all settings. At Low settings, average FPS falls from 151.6 at 1080p to 117.3 at 4K, a reduction of approximately 22.6%. This relatively modest decline suggests that at Low settings, the system is still somewhat CPU-bound, as the GPU has enough headroom to handle the increased pixel count without collapsing.

However, the scaling becomes more punishing at higher presets. At High settings, the average FPS drops from 89.3 at 1080p to 68.8 at 4K, a 23% decrease. Medium settings show a similar pattern: 95.3 FPS at 1080p down to 70.4 at 4K, a 26.1% reduction. The most severe scaling occurs at Ultra, where 74.6 FPS at 1080p falls to 54.5 at 4K, a 26.9% drop. This widening gap at higher settings confirms that the RTX 4060’s 8 GB GDDR6 memory and 128-bit bus become strained as texture and shading demands increase with resolution.

The intermediate 2560x1440 resolution acts as a middle ground. Low settings deliver 139.2 FPS, which is 8.2% lower than the 1080p result, while Ultra produces 67 FPS, 10.2% below the 1080p figure. The 1440p results indicate that the combo can still push high frame rates at lower presets, but the GPU’s limitations become apparent at Ultra, where the gap between 1440p and 1080p is proportionally larger than at Low settings.

How This Combo Ranks

In the benchmark database, this CPU-GPU combination ranks 1001 out of 1744 tested combos for Overpower. This places it in the lower-middle tier of all possible pairings, indicating that while it is not a top-tier setup, it is also far from the bottom. The percentile placement suggests that roughly 42.6% of tested combos outperform it, while 57.4% deliver worse results.

The CPU itself sits in the 78th percentile among all processors, with an average benchmark score of 19983. Its nearest rivals include the Intel Core i7-11600H (score 19949, deltaPct 0.2) and the AMD EPYC 7713P (score 20024, deltaPct -0.2). This means the Ryzen 5 5600G is essentially neck-and-neck with these parts, trailing the EPYC by just 0.2% while leading the i7-11600H by the same margin. The GPU, meanwhile, is in the 66th percentile with an average score of 23181, slightly behind the AMD Radeon RX 6600M (23321, deltaPct -0.6) and ahead of the Intel Arc B580 (23021, deltaPct 0.7).

The combination of a solid mid-range CPU and a slightly above-average GPU results in a pairing that is balanced but not exceptional. The rank of 1001 suggests that the overall experience is acceptable for 1080p and 1440p gaming, but it will not compete with high-end combos that dominate the top of the rankings.

GPU Role

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture with a 5 nm process from TSMC. It features 3072 shading units, 96 texture mapping units, and 48 raster output units, along with 24 ray tracing cores and 96 tensor cores. The chip has a base clock of 1830 MHz and a boost clock of 2460 MHz, with memory running at 2125 MHz (17 Gbps effective). The 8 GB of GDDR6 memory on a 128-bit bus provides 272.0 GB/s of bandwidth.

In Overpower, the GPU’s memory capacity appears to be a limiting factor at higher settings. The transition from Medium to Ultra at 4K shows a drop from 70.4 FPS to 54.5 FPS, a 22.6% reduction. This is consistent with the GPU running out of memory bandwidth or capacity, forcing the system to handle larger textures and effects data less efficiently. The pixel rate of 118.1 GPixel/s and texture rate of 236.2 GTexel/s are sufficient for 1080p, but at 4K Ultra, the GPU’s fill rate becomes a bottleneck.

The RTX 4060’s FP32 performance of 15.11 TFLOPS is respectable for its class, but the data shows that it cannot maintain high frame rates at 4K with maximum settings. The 66th percentile ranking among all GPUs, with an average benchmark score of 23181, puts it slightly below the RX 6600M but above the GTX 780 Ti (23338, deltaPct -0.7). This competitive positioning explains why the combo ranks where it does in Overpower.

Measured FPS Breakdown

At 1920x1080, the RTX 4060 and Ryzen 5 5600G deliver consistently high frame rates. Low settings produce an average of 151.6 FPS, which is more than enough for any display. Medium settings yield 95.3 FPS, High settings drop to 89.3 FPS, and Ultra settles at 74.6 FPS. All of these results are comfortably playable, with even Ultra staying above 60 FPS.

Moving to 2560x1440, the performance remains strong but begins to show strain. Low settings average 139.2 FPS, which is still excellent. Medium settings produce 83.2 FPS, High settings deliver 77.6 FPS, and Ultra drops to 67 FPS. The Ultra result is just above the 60 FPS threshold, making it a viable option for gamers who prioritize visual fidelity over raw frame rates.

At 3840x2160, the limitations of the combo become evident. Low settings still manage 117.3 FPS, which is impressive for 4K. However, Medium settings fall to 70.4 FPS, High settings to 68.8 FPS, and Ultra to 54.5 FPS. The Ultra result is below the 60 FPS target, meaning that 4K gaming at maximum settings will require compromises. The gap between Low and Ultra at 4K is substantial, with Ultra being 53.5% slower than Low.

Settings Recommendations

Based on the measured data, the best experience for this combo depends on the target resolution. At 1920x1080, Ultra settings at 74.6 FPS offer the highest visual quality while remaining above 60 FPS, making it the recommended preset for most users. The jump from High to Ultra costs only 14.7 FPS but provides the full visual experience.

For 2560x1440, Ultra settings at 67 FPS are still playable, but the margin above 60 FPS is thin. High settings at 77.6 FPS provide a safer buffer while sacrificing some visual fidelity. For gamers who prefer smoothness over maximum quality, High is the better choice at this resolution.

At 3840x2160, the data suggests that High settings at 68.8 FPS are the sweet spot. This preset delivers a playable frame rate while maintaining solid visuals. Ultra at 54.5 FPS is below the 60 FPS threshold, and the 14.3 FPS gain from dropping to High is significant. Medium at 70.4 FPS offers a marginal improvement over High, but the visual difference may not justify the change. Low settings at 117.3 FPS are only recommended for competitive play where frame rate is paramount.

FAQ

*Q: Is this combo capable of 4K gaming in Overpower?*

A: Yes, but with caveats. At Low settings, the combo achieves 117.3 FPS at 4K, and High settings deliver 68.8 FPS. Ultra settings drop to 54.5 FPS, which is below the 60 FPS target.

Q: What is the best resolution for this setup?

A: The data shows that 1920x1080 provides the most consistent experience, with all settings above 74.6 FPS. 2560x1440 is also viable, but Ultra settings there produce 67 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 5600G has an average benchmark score of 19983, which is 0.2% ahead of the Intel Core i7-11600H and 0.2% behind the Intel Core i7-11800H and AMD EPYC 7713P.

Q: Is the GPU’s 8 GB memory sufficient for this game?

A: The data indicates that at 4K Ultra, performance drops to 54.5 FPS, suggesting the 8 GB memory and 272.0 GB/s bandwidth are limiting factors at the highest settings.

Q: What frame rate can I expect at 1440p with High settings?

A: The measured average FPS at 2560x1440 with High settings is 77.6, which is comfortably above 60 FPS.

Q: Does the combo perform better at 1080p Low or 4K Low?

A: 1080p Low delivers 151.6 FPS, while 4K Low produces 117.3 FPS. The 1080p result is 29.2% higher.

CPU Role

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture (Cezanne codename) on a 7 nm process. It has a base clock of 3.90 GHz and a boost clock of 4.40 GHz, with a 65 W TDP. The CPU features 64 KB of L1 cache per core, 512 KB of L2 cache per core, and a 16 MB L3 cache. It supports DDR4 memory with dual-channel configuration and a bandwidth of 51.2 GB/s.

In the benchmark data, the CPU’s multi-threaded performance is solid. It scores 16758 in Cinebench R23 multicore and 7038 in Cinebench R20 multicore. Single-thread performance is also respectable, with a Cinebench R23 single-core score of 2365 and a Geekbench single-core score of 1933. The PassMark multithread score of 19717 and single-thread score of 3177 further confirm its mid-range positioning.

For Overpower, the CPU’s role is evident in the scaling behavior. At 1080p Low, the combo achieves 151.6 FPS, suggesting the CPU is capable of feeding the GPU adequately. However, at 4K Ultra, the GPU becomes the limiting factor, as evidenced by the 54.5 FPS result. The CPU’s 6 cores and 12 threads are sufficient for this action game, but the 16 MB L3 cache and 51.2 GB/s memory bandwidth are not the primary constraints at higher resolutions.

The CPU’s 78th percentile ranking, with an average benchmark score of 19983, places it slightly ahead of the Intel Core i7-11600H (19949) and slightly behind the Intel Core i7-11800H (20024). This narrow margin means the Ryzen 5 5600G is competitive with these mobile processors, though it lacks the higher core counts of more expensive desktop parts. For Overpower, the CPU delivers enough performance to avoid bottlenecking the RTX 4060 at 1080p and 1440p, but the combination’s overall rank of 1001 out of 1744 reflects the GPU’s limitations at 4K.