Overpower

The AMD Ryzen 5 5600 and Radeon RX 6700 XT combination delivers a well-balanced 1080p and 1440p gaming experience in Overpower, with the data showing that the GPU becomes the primary performance limiter at higher resolutions. The combo ranks in the 55th percentile of all tested pairings, and the benchmark results indicate that the system is capable of exceeding 60 FPS at Ultra settings in most scenarios, though 4K Ultra remains the only configuration that dips below the 60 FPS threshold.

FAQ

*Q: What is the highest average frame rate this combo achieves in Overpower?*

A: The highest recorded average is 154.1 FPS, achieved at 1920x1080 with Low settings. This drops to 117.2 FPS at 3840x2160 with the same Low preset, showing strong scaling across resolutions when graphical load is minimized.

Q: Can this system maintain 60 FPS at 4K with Ultra settings?

A: No. At 3840x2160 with Ultra settings, the average FPS is 57.9, which is below the 60 FPS target. However, at 4K with High settings, the average rises to 67.9 FPS, indicating that dropping from Ultra to High is sufficient for smooth 4K gameplay.

Q: How does the Ryzen 5 5600 compare to its nearest rival in synthetic benchmarks?

A: The Ryzen 5 5600 has an average benchmark score of 21765, which is 0.6% higher than the Intel Xeon D-1746TER (21635) and 0.6% lower than the AMD EPYC 9554P (21899). It sits 0.9% behind the Intel Core i7-11700F (21957).

Q: What is the GPU's percentile ranking among all tested graphics cards?

A: The Radeon RX 6700 XT ranks in the 77th percentile among all GPUs, with an average benchmark score of 33721. Its closest rival, the Radeon RX 6800, scores 33493, placing the RX 6700 XT 0.7% ahead.

Q: What is the difference in FPS between Low and Ultra settings at 1440p?

A: At 2560x1440, Low settings produce an average of 136.4 FPS, while Ultra settings yield 64.4 FPS. This represents a performance drop of 72 FPS (or roughly 53%) when moving from the lowest to the highest preset.

Q: Does the Ryzen 5 5600's single-thread performance support high frame rates?

A: The CPU scores 882 in 3DMark single-thread and 3256 in PassMark single-thread tests. These results, combined with measured FPS above 150 at 1080p Low, suggest adequate single-core capability for high-refresh-rate gaming in Overpower.

Settings Recommendations

The benchmark data clearly indicates that the High preset offers the best balance of visual quality and performance across all three resolutions. At 1920x1080, High settings deliver 88.8 FPS, which is 12 FPS lower than Medium (97.5) but 12 FPS higher than Ultra (76.8). The gap narrows at 1440p, where High produces 78.9 FPS against Medium's 87.6 and Ultra's 64.4. At 4K, High settings yield 67.9 FPS, which is the only preset above 60 FPS besides Low (117.2).

For users prioritizing frame rate over visuals, Medium settings provide a substantial boost without the extreme performance cost of Ultra. The Medium preset at 1080p achieves 97.5 FPS, which is 10.7% faster than High. At 1440p, Medium reaches 87.6 FPS, and even at 4K, Medium maintains 77 FPS. This makes Medium the recommended choice for 1440p and 4K displays with 120Hz refresh rates.

Ultra settings should only be considered for 1080p displays, where the 76.8 FPS average remains playable. At 1440p, Ultra's 64.4 FPS is acceptable for 60Hz monitors, but the 57.9 FPS at 4K Ultra falls below the 60 FPS threshold. The data suggests that High is the optimal preset for most users, as it provides a comfortable margin above 60 FPS at all resolutions while maintaining higher visual fidelity than Medium.

How This Combo Ranks

The Ryzen 5 5600 and RX 6700 XT combination ranks 961st out of 1744 tested combos in Overpower, placing it in the 55.1st percentile of all system pairings. This mid-pack position reflects the balanced nature of the components: the GPU ranks in the 77th percentile among all GPUs, while the CPU ranks in the 79th percentile among all CPUs. The combo's overall rank is slightly lower than either component's individual percentile, suggesting that the pairing does not extract the absolute maximum performance from either part in this specific game.

The GPU's nearest rival, the Radeon RX 6800, scores 0.7% higher in average benchmarks, which likely translates to a modest FPS advantage in Overpower. Similarly, the CPU's nearest rival, the Intel Core i7-11700F, scores 0.9% higher on average. These small deltas indicate that the combo is closely matched with systems using slightly higher-tier components, and the 961st rank reflects a competitive but not top-tier position in the overall hierarchy.

Measured FPS Breakdown

At 1920x1080, the system shows a clear progression across settings: Low produces 154.1 FPS, Medium drops to 97.5 FPS, High yields 88.8 FPS, and Ultra bottoms out at 76.8 FPS. The jump from Low to Medium represents a 36.7% performance reduction, while the step from Medium to High is a smaller 8.9% drop. The final step from High to Ultra costs another 12.0% of performance.

At 2560x1440, the same pattern holds with lower absolute numbers: Low achieves 136.4 FPS, Medium reaches 87.6 FPS, High delivers 78.9 FPS, and Ultra falls to 64.4 FPS. The relative cost of Ultra versus High is 18.4% at this resolution, higher than the 12.0% observed at 1080p. This suggests that the GPU is becoming more stressed at 1440p, making the visual quality improvements of Ultra more expensive.

At 3840x2160, performance drops further: Low produces 117.2 FPS, Medium yields 77 FPS, High achieves 67.9 FPS, and Ultra falls to 57.9 FPS. The gap between Medium and High narrows to 11.8% at 4K, while the gap between High and Ultra remains significant at 14.7%. Notably, the difference between 1080p and 4K at Low settings is only 36.9 FPS (154.1 to 117.2), while at Ultra settings the difference is 18.9 FPS (76.8 to 57.9), indicating that higher settings amplify the resolution penalty.

GPU Role

The Radeon RX 6700 XT features 12 GB of GDDR6 memory on a 192-bit bus, delivering 384.0 GB/s of bandwidth. The GPU has 2560 shading units, 160 texture mapping units, and 64 ROPs, with 40 ray tracing cores. Its base clock is 2321 MHz, boost clock is 2581 MHz, and game clock is 2424 MHz. The memory runs at 2000 MHz with 16 Gbps effective speed.

The 12 GB VRAM capacity is sufficient for Overpower at all tested settings, as the benchmark data shows no anomalous performance drops that would indicate memory throttling. The 384.0 GB/s bandwidth supports the high frame rates observed at 1080p Low (154.1 FPS) and remains adequate at 4K, where the GPU still manages 117.2 FPS on Low settings. The FP32 compute rating of 13.21 TFLOPS and texture rate of 413.0 GTexel/s provide the raw throughput needed for the game's action-oriented rendering.

The GPU's 77th percentile ranking places it above many competing cards, and its nearest rival (RX 6800) is only 0.7% faster in average benchmarks. In Overpower, this translates to a marginal FPS difference. The 40 ray tracing cores are present but their impact on Overpower is not directly measured in the data, suggesting the game may not heavily utilize ray tracing or that the feature is not enabled in these tests.

CPU Role

The AMD Ryzen 5 5600 is a 6-core, 12-thread processor based on the Zen 3 architecture (Vermeer codename), manufactured on TSMC's 7 nm process. It has a base clock of 3.50 GHz and a boost clock of 4.40 GHz, with a 65 W TDP. The CPU features 32 MB of shared L3 cache, 512 KB L2 per core, and 64 KB L1 per core. Memory support is dual-channel DDR4 with 51.2 GB/s bandwidth.

The CPU's 79th percentile ranking among all processors indicates strong performance for its class. Single-thread scores of 882 (3DMark) and 3256 (PassMark) suggest that the Zen 3 architecture provides sufficient IPC for gaming workloads. The multi-thread scores are also solid: Cinebench R23 multi-core reaches 18309, and PassMark multi-thread scores 21541. These results demonstrate that the 6-core configuration is well-suited to Overpower's demands.

The 32 MB L3 cache is particularly beneficial for gaming, as it reduces memory latency and improves data locality. The 51.2 GB/s memory bandwidth is adequate for the CPU's needs, though it is not a limiting factor in the measured FPS. The CPU's boost clock of 4.40 GHz allows it to maintain high single-thread performance, which is critical for maintaining high frame rates at lower resolutions where the GPU is less stressed.

Resolution Scaling

The data reveals a clear pattern of diminishing returns as resolution increases. From 1080p to 1440p, the average FPS drop across all settings is approximately 11.5%: Low falls from 154.1 to 136.4 (11.5% decrease), Medium from 97.5 to 87.6 (10.2%), High from 88.8 to 78.9 (11.2%), and Ultra from 76.8 to 64.4 (16.1%). The Ultra setting shows the largest relative drop, indicating that the GPU is more heavily taxed at 1440p when all visual features are enabled.

From 1440p to 4K, the drops become more pronounced: Low falls from 136.4 to 117.2 (14.1%), Medium from 87.6 to 77 (12.1%), High from 78.9 to 67.9 (13.9%), and Ultra from 64.4 to 57.9 (10.1%). Interestingly, the Ultra setting shows the smallest percentage drop between 1440p and 4K, suggesting that at this extreme configuration, the GPU is already operating near its limits and additional resolution has less incremental impact.

The overall scaling from 1080p to 4K shows a 24.0% reduction at Low settings (154.1 to 117.2), but only a 24.6% reduction at Ultra (76.8 to 57.9). This consistency across settings indicates that the GPU is the primary limiting factor at all resolutions in Overpower. The CPU's performance headroom, evidenced by high frame rates at 1080p Low (154.1 FPS), means that the Ryzen 5 5600 is not bottlenecking the system. The data confirms that upgrading the GPU would yield the most significant FPS improvements, particularly at 1440p and 4K resolutions.