Overpower

The AMD Ryzen 5 5600 paired with the AMD Radeon RX 580 delivers a playable but constrained experience in Overpower, with the data clearly showing that the GPU is the primary bottleneck across most settings. The combination ranks 1606th out of 1744 tested combos, placing it in the lower percentile of systems, which aligns with the measured frame rates that struggle at higher resolutions and quality presets. This analysis breaks down the scaling behavior, optimal settings, and the specific hardware characteristics that define this pairing.

Resolution Scaling

The measured FPS data reveals a steep performance drop as resolution increases, which is a classic indicator of GPU-bound rendering. At 1080p with Low settings, the combo achieves 71.3 FPS, but this falls to 64.5 FPS at 1440p and further to 49.9 FPS at 4K. That represents a 30% reduction from 1080p to 4K at the lowest preset, a substantial penalty that points squarely at the RX 580's fill rate and memory bandwidth limitations. The trend is consistent across all settings: the gap between 1080p and 4K widens as quality increases, suggesting the GPU's compute units are saturated earlier at higher resolutions.

At High settings, the scaling is even more telling. The system drops from 42.6 FPS at 1080p to 38.3 FPS at 1440p, and then falls to 30.9 FPS at 4K. The 1440p to 4K transition alone costs 19% of the frame rate, while the 1080p to 1440p step costs only 10%. This nonlinear degradation indicates that the RX 580's 256-bit memory bus and 256.0 GB/s bandwidth are insufficient to feed the GPU's 2304 shading units as pixel count grows. The data suggests that at 4K, the system is operating near the memory subsystem's effective ceiling, with the GPU's 32 ROPs also contributing to the bottleneck.

The Ultra preset shows the most severe scaling, with 31 FPS at 1080p, 30.5 FPS at 1440p, and 27 FPS at 4K. Interestingly, the 1080p to 1440p drop is minimal at just 1.6%, implying that at Ultra settings, the GPU is already fully utilized at 1080p and additional resolution has diminishing impact until 4K, where the memory bandwidth constraint becomes dominant. The overall pattern—where Low settings show the largest absolute FPS differences across resolutions—confirms that the RX 580's raw shading throughput is the limiting factor, not the Ryzen 5 5600's Zen 3 architecture.

Settings Recommendations

Based on the measured rows, the optimal balance between visual quality and frame rate is the Medium preset at 1080p. This setting delivers 45.5 FPS, which is 7% higher than High at the same resolution (42.6 FPS) and 32% higher than Ultra (31 FPS). The jump from Low to Medium costs 36% of the frame rate (71.3 to 45.5 FPS), but the visual improvement typically justifies that trade-off in an action title. Low settings at 1080p produce 71.3 FPS, which is smooth but sacrifices too much detail for a game that likely benefits from visual clarity during fast-paced action.

At 1440p, the Medium preset is the only viable option for maintaining playable frame rates, yielding 36.8 FPS. High at 1440p produces 38.3 FPS, which is marginally better, but the difference between Medium and High at this resolution is just 3.9%, suggesting that the Medium preset may actually be more consistent in demanding scenes. The Ultra preset at 1440p falls to 30.5 FPS, which is below the 30 FPS threshold for comfortable play, making it a poor choice. For 4K, the data shows that only Low settings approach playability at 49.9 FPS, but even that is borderline; High (30.9 FPS), Medium (33.3 FPS), and Ultra (27 FPS) all fall below or near the 30 FPS minimum for smooth gameplay.

The data strongly suggests that users should avoid Ultra entirely on this combo. The performance cost from High to Ultra is 27% at 1080p (42.6 to 31 FPS) and 20% at 1440p (38.3 to 30.5 FPS), with no evidence in the frame rate data that the extra visual fidelity is worth the substantial frame rate penalty. The Medium preset at 1080p offers the best experience per the measured rows, providing a frame rate that is 47% higher than Ultra while likely retaining most of the visual enhancements that matter in an action game.

How This Combo Ranks

The combo's rank of 1606 out of 1744 tested combinations places it in the 8th percentile of all systems evaluated for Overpower. This is a low ranking that reflects the RX 580's age and the demanding nature of the game. The CPU, however, is not the limiting factor in this pairing. The Ryzen 5 5600 sits in the 79th percentile of all CPUs in general benchmarks, with an average benchmark score of 21765. Its nearest rivals in CPU performance include the Intel Xeon D-1746TER (21635, 0.6% slower), the AMD EPYC 9554P (21899, 0.6% faster), and the Intel Core i7-11700F (21957, 0.9% faster). These deltas are negligible, confirming that the Ryzen 5 5600 is a modern, capable processor that is not holding back the GPU.

In contrast, the RX 580's general benchmark scores place it in the 53rd percentile of all GPUs, with an average score of 13559. Its nearest rivals are the NVIDIA GeForce GTX 570 (13564, 0% delta), the NVIDIA GeForce GTX 950 (13549, 0.1% faster), and the AMD Radeon Pro 455 (13416, 1.1% faster). These are all older or lower-tier GPUs, reinforcing that the RX 580 is a mid-range part from 2017 that is now at the bottom of the performance curve for modern games.

The discrepancy between the CPU's high percentile (79) and the GPU's mid percentile (53) explains why the combo ranks so low in Overpower. The game is clearly GPU-bound, and the RX 580's 6.175 TFLOPS of FP32 performance and 42.88 GPixel/s pixel rate are simply insufficient for high-end settings. The data indicates that upgrading the GPU would yield significant gains, while the Ryzen 5 5600 has ample headroom to support a faster graphics card without becoming a bottleneck.

Measured FPS Breakdown

The complete measured FPS dataset for this combo shows consistent patterns across all twelve resolution and settings combinations. At 1080p, the system delivers 71.3 FPS on Low, 45.5 FPS on Medium, 42.6 FPS on High, and 31 FPS on Ultra. The step from Low to Medium is the largest single drop at 36%, while Medium to High costs only 6.4%, and High to Ultra costs 27%. This suggests that Medium is the sweet spot, with High offering only marginal gains that are likely not perceptible in gameplay.

At 1440p, the numbers are 64.5 FPS on Low, 36.8 FPS on Medium, 38.3 FPS on High, and 30.5 FPS on Ultra. Notably, High at 1440p (38.3 FPS) is actually slightly faster than Medium at 1440p (36.8 FPS), which is an anomaly likely caused by the specific rendering paths in the game. The Low preset at 1440p retains 90% of its 1080p performance (64.5 vs 71.3 FPS), indicating that the GPU is not fully saturated until higher quality settings are applied.

At 4K, the system produces 49.9 FPS on Low, 33.3 FPS on Medium, 30.9 FPS on High, and 27 FPS on Ultra. The Low preset at 4K is the only configuration that exceeds 30 FPS, and it does so by a comfortable margin. However, the transition from 1440p Low (64.5 FPS) to 4K Low (49.9 FPS) costs 23%, which is a substantial penalty even at the lowest quality setting. This reinforces that the RX 580's memory bandwidth (256.0 GB/s) is the key constraint at 4K, as the pixel throughput required at 3840x2160 overwhelms the 8 GB of GDDR5 memory.

GPU Role

The AMD Radeon RX 580 is the dominant component in this combo's Overpower performance, and its specifications explain the measured results. The GPU features 2304 shading units, 144 texture mapping units, and 32 ROPs, with a base clock of 1257 MHz and a boost clock of 1340 MHz. Its 8 GB of GDDR5 memory operates at an effective 8 Gbps over a 256-bit bus, yielding 256.0 GB/s of bandwidth. These figures place the RX 580 in the 53rd percentile of all GPUs, with a passmark G3D score of 8813 and a passmark GPU compute score of 3488.

The 14 nm Polaris 20 chip, manufactured by GlobalFoundries, is built on the GCN 4.0 architecture and has a TDP of 185 W. The GPU's 42.88 GPixel/s pixel rate and 193.0 GTexel/s texture rate are modest by modern standards, but they are sufficient for 1080p gaming at medium settings. The data shows that the RX 580's performance in Overpower is heavily influenced by its 32 ROPs, which limit fill-rate-intensive effects like anti-aliasing and high-resolution shadows. This is why the Ultra preset at 1080p (31 FPS) is only slightly faster than the High preset at 4K (30.9 FPS)—both configurations are likely hitting the same ROP ceiling.

The GPU's memory configuration is also critical. The 8 GB of GDDR5 at 256.0 GB/s is adequate for 1080p and 1440p, but the 4K data shows a clear bandwidth wall. The drop from 1440p High (38.3 FPS) to 4K High (30.9 FPS) represents a 19% loss, which is almost entirely attributable to the memory subsystem struggling to feed the GPU's shading units. The 8 Gbps effective memory speed is a bottleneck at 4K, and the fact that the Low preset at 4K (49.9 FPS) is 61% faster than the Ultra preset at 4K (27 FPS) demonstrates that the game's higher presets demand more memory bandwidth than the RX 580 can provide.

The GPU's support for DirectX 12 (12_0) and Vulkan 1.3 means it can handle modern APIs, but its GCN 4.0 architecture lacks dedicated ray tracing cores and tensor cores. This is not directly reflected in the measured FPS, but it explains why the Ultra preset, which likely includes advanced lighting effects, performs so poorly. The RX 580's 6.175 TFLOPS of FP32 compute is a hard limit for the game's shader complexity, and the data confirms that this GPU is best suited for 1080p Medium or 1440p Low in Overpower.