Overpower

This combo pairs AMD's 6-core Ryzen 5 5500 with NVIDIA's RTX 5070 Ti, a 16 GB GDDR7 card built on the Blackwell architecture. In Overpower, the measured results show a pairing that is heavily GPU-limited at higher resolutions but exhibits a curious CPU ceiling at 1080p that reshapes how you should set the game up. The data indicates a strong 4K performer that loses some of its edge when the resolution drops.

Resolution Scaling

The FPS delta from 1080p to 4K is the defining characteristic of this pairing. At Ultra settings, the average frame rate falls from 126.4 FPS at 1920x1080 to 113.6 FPS at 2560x1440, then drops sharply to 96 FPS at 3840x2160. That is a 24% reduction in frame rate from 1440p to 4K, which shows the GPU is doing progressively heavier lifting as pixel count rises. The scaling pattern is consistent across all settings presets: Low settings see a drop from 203.3 FPS at 1080p to 195.3 at 1440p, then down to 184.2 at 4K — a much gentler slope that suggests the CPU is holding things back at lower resolutions.

Look at the Low preset numbers carefully. At 1080p Low, the system produces 203.3 FPS. At 1440p Low, it produces 195.3 FPS — only a 4% drop. At 4K Low, it still manages 184.2 FPS. That tiny scaling penalty from 1080p to 1440p indicates that at Low settings, the Ryzen 5 5500's 6 cores are the limiting factor, not the RTX 5070 Ti. The GPU has massive headroom that it cannot exploit because the CPU cannot feed it frames fast enough. Once you move to High or Ultra settings, the GPU becomes the bottleneck, and the scaling penalty between resolutions becomes more pronounced.

At Medium settings, the frame rates sit at 160 FPS (1080p), 142.3 FPS (1440p), and 124.3 FPS (4K). The 4K result is 22% lower than the 1080p result, which is a typical GPU-bound scaling curve. The data strongly suggests that if you want to maximize the RTX 5070 Ti's potential, you should push resolution higher rather than chasing extreme frame rates at 1080p.

CPU Role

The Ryzen 5 5500 is a 6-core, 12-thread Zen 3 part with a base clock of 3.60 GHz and a boost clock of 4.20 GHz. It has 16 MB of L3 cache and a 51.2 GB/s memory bandwidth figure. In synthetic benchmarks, it scores 836 in 3DMark single-thread and 5411 in 3DMark max threads, with a Cinebench R23 multi-core score of 16429 and a single-core score of 2319. These numbers place it at the 79th percentile among all CPUs, with its closest rival being the Intel Core i5-12500, which scores 20897 against the Ryzen's 20875 average — a negligible 0.1% difference.

In Overpower, the CPU's influence is most visible at 1080p with Low settings. The 203.3 FPS average is the highest result in the entire dataset, but it is only 4% higher than the 1440p Low result of 195.3 FPS. This compression indicates that the CPU is saturating its ability to issue draw calls and physics updates. The 12 threads are sufficient to keep the game running smoothly, but they cannot push frame rates meaningfully beyond the 200 FPS mark. The single-thread score of 836 in 3DMark suggests that the game's primary thread is well-served, but the 4.20 GHz boost clock is not extraordinary by modern standards.

The practical takeaway is that this CPU will not hold back the RTX 5070 Ti at 4K, where the GPU is clearly the bottleneck. At 1080p, however, you are leaving performance on the table. The data shows that moving from 1080p Low to 1440p Low costs only 8 FPS, so you should not be afraid to increase resolution to reduce CPU pressure. The CPU's 65W TDP and AM4 socket make it an easy drop-in upgrade path, but as a pairing with a high-end GPU, it is the weaker link in lower-resolution scenarios.

GPU Role

The RTX 5070 Ti is a massive GPU: 16 GB of GDDR7 memory on a 256-bit bus with 896.0 GB/s of bandwidth. Its boost clock is 2452 MHz, and it packs 8960 shading units, 280 TMUs, and 96 ROPs. The FP32 compute throughput is 43.94 TFLOPS. In synthetic benchmarks, it scores 32974 in Passmark G3D and 6604 in 3DMark Steel Nomad DX12, placing it at the 87th percentile among all GPUs. Its average benchmark score of 52086 puts it exactly level with the NVIDIA GeForce RTX 4080, which scores 52085 — a 0% delta that shows these two cards trade blows in raw compute.

The GPU's role in Overpower is straightforward: it is the dominant performance driver at 4K. At 4K Ultra, the system produces 96 FPS, which is a playable result for an action game. The 16 GB VRAM is ample for this title, and the 896.0 GB/s bandwidth ensures that texture streaming at high resolutions is not a limiting factor. The GPU's 300W TDP is substantial, but the benchmark results show it is being put to good use.

The interesting nuance is the GPU's behavior at lower resolutions. At 1080p Ultra, the system produces 126.4 FPS, which is only 31% higher than the 4K Ultra result of 96 FPS. That is a small gain for a 4x reduction in pixel count, which again points to the CPU becoming the bottleneck. The GPU is capable of far more at 1080p, but it is waiting on the CPU to supply data. The RTX 5070 Ti's nearest rival, the RTX 4080, has virtually identical synthetic scores, so you can expect this GPU to perform similarly to that previous-generation flagship in this title.

Settings Recommendations

The measured rows provide a clear hierarchy of performance. At 4K, the options are: Ultra at 96 FPS, High at 115.1 FPS, Medium at 124.3 FPS, and Low at 184.2 FPS. The jump from Medium to Low is massive — a 48% increase in frame rate — which suggests that Low settings reduce the GPU workload dramatically. However, for a smooth action game experience, High settings at 115.1 FPS is the sweet spot at 4K. It is a 20% improvement over Ultra while presumably retaining most of the visual fidelity.

At 1440p, the best experience is High at 132.3 FPS, which is a comfortable margin above the 60 FPS threshold for smooth gameplay. Ultra at 113.6 FPS is also viable, but High offers a 16% frame rate boost with a likely minor visual penalty. At 1080p, the data gets more complicated. Ultra runs at 126.4 FPS, High at 152.5 FPS, Medium at 160 FPS, and Low at 203.3 FPS. The gap between Medium and Low is 27%, which is significant, but the gap between High and Medium is only 5%.

For the best overall experience, the data recommends High settings at 1440p. This resolution balances the CPU and GPU loads, giving you 132.3 FPS without pushing the CPU into a bottleneck. If you insist on 4K, High settings at 115.1 FPS is the recommended preset, as it avoids the steep performance hit of Ultra while staying well above 100 FPS. Avoid Ultra at 4K unless you demand maximum fidelity and can tolerate 96 FPS.

How This Combo Ranks

This specific combination of AMD Ryzen 5 5500 and NVIDIA GeForce RTX 5070 Ti ranks 220th out of 1744 tested combos in Overpower. That places it in the top 12.6% of all tested systems, which is an impressive showing. The rank reflects the GPU's strength, as the CPU is a mid-range part that does not boost the combo to the absolute top tier.

The 220th rank out of 1744 combos means there are 219 other system configurations that produce higher average frame rates in this game. Given that the RTX 5070 Ti is a top-tier GPU, the ranking is likely held back by the Ryzen 5 5500's modest single-thread performance in CPU-bound scenarios. The data suggests that pairing this GPU with a stronger CPU would yield a significantly higher rank, as the GPU has untapped headroom at 1080p and 1440p.

In the context of the benchmark database, this combo is a strong 4K performer that punches above its weight in GPU-heavy scenes. The rank is respectable, but it is not a top-100 result. For a builder looking at this combo, the data indicates that the GPU is the primary asset, and the CPU is a compromise that limits peak frame rates in less demanding settings.

Measured FPS Breakdown

The full dataset of measured average FPS is as follows:

1920x1080:

• Low: 203.3 FPS
• Medium: 160 FPS
• High: 152.5 FPS
• Ultra: 126.4 FPS

2560x1440:

• Low: 195.3 FPS
• Medium: 142.3 FPS
• High: 132.3 FPS
• Ultra: 113.6 FPS

3840x2160:

• Low: 184.2 FPS
• Medium: 124.3 FPS
• High: 115.1 FPS
• Ultra: 96 FPS

Across all resolutions, the Low preset delivers the highest frame rates, with the 1080p Low result of 203.3 FPS being the single fastest measurement in the dataset. The Ultra preset is the slowest at every resolution, with the 4K Ultra result of 96 FPS being the lowest average recorded. The spread between Low and Ultra grows with resolution: 77 FPS at 1080p, 81.7 FPS at 1440p, and 88.2 FPS at 4K. This widening gap indicates that the GPU's workload scales more steeply than the CPU's as you increase both resolution and settings, which is typical for a modern action title with heavy visual effects.

The High preset consistently sits between Medium and Ultra, with the gap between High and Ultra being 26.1 FPS at 1080p, 18.7 FPS at 1440p, and 19.1 FPS at 4K. The Medium preset is noticeably faster than High at all resolutions, with a 7.5 FPS advantage at 1080p, 10 FPS at 1440p, and 9.2 FPS at 4K. These numbers suggest that the step from Medium to High costs a small amount of performance while the step from High to Ultra costs significantly more, making High the most efficient preset for frame rate per visual quality.