Overpower

The pairing of the AMD Ryzen 5 5500 with the NVIDIA GeForce RTX 4070 Ti in Overpower presents a compelling study in bottleneck dynamics. The data shows a system where the GPU is clearly the dominant force, but the CPU's influence becomes increasingly apparent as resolution drops. This analysis examines the measured FPS across three resolutions and four settings presets, interpreting what the numbers reveal about the hardware's interplay.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data reveals a clear pattern of scaling as resolution increases, with the most dramatic shifts occurring between 1080p and 1440p. At Low settings, the average FPS drops from 201 at 1920x1080 to 194.7 at 2560x1440, a modest decline of just 6.3 FPS. This small delta strongly suggests that at lower resolutions and settings, the system is not fully GPU-bound; the frame rate is being held back by the CPU's ability to feed the graphics card. The Ryzen 5 5500, with its 6 cores and 12 threads, appears to be the limiting factor here, preventing the RTX 4070 Ti from reaching its full potential.

Moving to 4K at 3840x2160 with Low settings, the average FPS drops to 187.4. This is a further reduction of 7.3 FPS from 1440p, but the percentage change is relatively small. The pattern shifts more dramatically when examining higher settings presets. At High settings, the FPS goes from 145.9 at 1080p to 130.1 at 1440p, a drop of 15.8 FPS, and then to 108.1 at 4K, another 22 FPS reduction. This steeper decline at higher settings and resolutions indicates that the GPU is becoming the primary bottleneck, as the increased pixel count and graphical complexity demand more from the RTX 4070 Ti's 7680 shading units and 12 GB of GDDR6X memory.

The Ultra preset data provides the clearest evidence of GPU-bound scaling. The average FPS drops from 120.2 at 1080p to 107.3 at 1440p, then to 93 at 4K. This consistent, linear decline across all three resolutions suggests that the RTX 4070 Ti is being fully utilized, and the frame rate is directly tied to the rendering load. The gap between Low and Ultra settings at 1080p is 80.8 FPS (201 vs 120.2), but at 4K that gap narrows to 94.4 FPS (187.4 vs 93). This compression of performance differences at higher resolutions is a classic sign of a GPU-limited scenario, where the graphics card's compute and memory bandwidth are the constraining factors, rather than the CPU's processing speed.

Settings Recommendations — which preset gives the best experience per the measured rows

Examining the measured rows, the Medium preset emerges as the most balanced choice for this combination across all resolutions. At 1920x1080, Medium delivers 152.4 FPS, which is 6.5 FPS higher than High (145.9) and only 48.6 FPS lower than the Low preset's 201 FPS. The jump from Medium to Ultra costs 32.2 FPS at 1080p, a significant reduction for what is typically a marginal visual improvement. At 2560x1440, Medium provides 138 FPS, which remains well above the 60 FPS threshold and offers a 30.7 FPS advantage over Ultra's 107.3. The data suggests that the visual fidelity gains from Ultra are not worth the performance sacrifice.

For 4K gaming, Medium again proves to be the most sensible option. The 118.4 FPS average at 3840x2160 with Medium settings is highly playable, while High drops to 108.1 FPS and Ultra falls to 93 FPS. The Low preset at 4K achieves 187.4 FPS, but this comes at the cost of significant visual quality. The benchmark results indicate that Medium settings provide the best experience per the measured rows, offering a robust frame rate that remains responsive while still delivering a reasonable level of graphical detail. The High preset at 4K is also viable, but the 10.3 FPS difference between High and Medium at that resolution suggests that the extra visual features may not justify the performance penalty.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4070 Ti's specifications provide context for its measured performance in Overpower. The GPU features a base clock of 2310 MHz and a boost clock of 2610 MHz, with a memory clock of 1313 MHz achieving 21 Gbps effective. This configuration yields a memory bandwidth of 504.2 GB/s across a 192-bit bus, which appears sufficient for the game's demands at the tested settings. The 12 GB of GDDR6X memory is a substantial allocation, and the data suggests that Overpower does not exceed this capacity at any of the tested presets, as there are no signs of stuttering or severe frame drops that would indicate memory swapping.

The GPU's compute capabilities are substantial, with 7680 shading units, 240 TMUs, and 80 ROPs. The pixel rate of 208.8 GPixel/s and texture rate of 626.4 GTexel/s indicate that the card can handle high-resolution rendering with complex textures. The FP32 performance of 40.09 TFLOPS provides the raw compute power needed for modern game engines. The benchmark results show that the RTX 4070 Ti is the primary driver of frame rates at higher settings, as evidenced by the scaling pattern discussed earlier. The GPU's 85th percentile ranking among all GPUs and its average benchmark score of 44900 place it in a strong position, and the measured FPS in Overpower aligns with this high-end performance tier.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the RTX 4070 Ti and Ryzen 5 5500 combination produces an average of 201 FPS on Low settings. The Medium preset achieves 152.4 FPS, High delivers 145.9 FPS, and Ultra reaches 120.2 FPS. The progression from Low to Ultra shows a total reduction of 80.8 FPS, with the largest single drop occurring between Low and Medium at 48.6 FPS. The difference between Medium and High is a modest 6.5 FPS, while the High to Ultra transition costs 25.7 FPS.

At 2560x1440, the average FPS figures are 194.7 (Low), 138 (Medium), 130.1 (High), and 107.3 (Ultra). The Low to Medium drop is 56.7 FPS, which is larger than at 1080p, indicating that the GPU is beginning to feel the load. The Medium to High gap is 7.9 FPS, and High to Ultra costs 22.8 FPS. The total range from Low to Ultra is 87.4 FPS.

At 3840x2160, the 4K results are 187.4 FPS (Low), 118.4 FPS (Medium), 108.1 FPS (High), and 93 FPS (Ultra). The Low to Medium drop is 69 FPS, the largest single resolution-based decline in the dataset. Medium to High is 10.3 FPS, and High to Ultra is 15.1 FPS. The total range at 4K is 94.4 FPS, showing that the GPU's workload is increasing with each setting tier.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 4070 Ti ranks 253rd out of 1744 tested combos in Overpower. This places the system in the top 14.5 percent of all configurations tested, a strong showing given the CPU's mid-range positioning. The Ryzen 5 5500 has a percentile rank of 79 among all CPUs, which is respectable but not top-tier, and its average benchmark score of 20875 is nearly identical to the Intel Core i5-12500, which scores 20897 with a deltaPct of -0.1.

The GPU's percentile rank of 85 among all GPUs is higher than the CPU's, and its average benchmark score of 44900 places it close to the NVIDIA GeForce RTX 5090 Mobile, which scores 45152 with a deltaPct of -0.6. The ranking of 253 suggests that while the GPU is powerful, the CPU may be holding back the overall system performance in Overpower. The data implies that a stronger CPU could potentially push this combo higher in the rankings, but the current configuration still delivers excellent frame rates, as evidenced by the measured FPS figures. The deltaPct values for the CPU's nearest rivals are all within 0.2 percent, indicating that the Ryzen 5 5500 is performing as expected for its class.

FAQ

Q: What is the highest average FPS recorded for this combo?

A: The highest average FPS is 201, achieved at 1920x1080 resolution with Low settings.

Q: How does the combo rank among all tested configurations in Overpower?

A: The combo ranks 253rd out of 1744 tested combos in the game.

Q: What is the performance difference between Low and Ultra settings at 4K?

A: At 3840x2160, Low settings produce 187.4 FPS while Ultra settings produce 93 FPS, a difference of 94.4 FPS.

Q: Which settings preset provides the most balanced performance across all resolutions?

A: The Medium preset provides the most balanced performance, with 152.4 FPS at 1080p, 138 FPS at 1440p, and 118.4 FPS at 4K.

Q: What is the minimum FPS recorded at 1440p with High settings?

A: The data shows an average of 130.1 FPS at 2560x1440 with High settings, with no minimum FPS value provided.

Q: How does the CPU's performance compare to its nearest rival?

A: The AMD Ryzen 5 5500 has an average benchmark score of 20875, which is 0.1 percent lower than the Intel Core i5-12500's score of 20897.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5500 is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Cezanne. It operates with a base clock of 3.60 GHz and a boost clock of 4.20 GHz, with a TDP of 65 W. The CPU's 16 MB of L3 cache and dual-channel DDR4 memory support with a bandwidth of 51.2 GB/s provide the data throughput necessary for gaming workloads. Its PCIe Gen 3 interface is a potential limitation when paired with a high-end GPU, as the RTX 4070 Ti supports PCIe 4.0, but the benchmark results show that this does not severely impact performance in Overpower.

The CPU's benchmark scores reveal its multi-threaded capabilities. The Cinebench R23 multicore score of 16429 and Passmark multithread score of 19330 indicate solid performance for a 6-core part. In Overpower, the CPU's role becomes most apparent at lower resolutions and settings. The data shows that at 1080p Low, the system achieves 201 FPS, but the scaling to 1440p and 4K is minimal (194.7 and 187.4 FPS respectively), suggesting that the CPU is reaching its limit in terms of frame generation. The single-thread performance, as evidenced by the 3dmark single_thread score of 836 and passmark single_thread score of 3058, is adequate for gaming, but it may not fully saturate the RTX 4070 Ti's capabilities in less demanding scenarios.

The CPU's rank of 79th percentile among all CPUs, with an average benchmark score of 20875, places it in the upper mid-range. Its performance delta of -0.1 percent compared to the Intel Core i5-12500 shows that it is competitive with similar parts. However, the 253rd ranking of the full combo out of 1744 suggests that the CPU is the weaker link in this pairing. The data implies that while the RTX 4070 Ti is capable of delivering high frame rates, the Ryzen 5 5500 may prevent the system from achieving even higher numbers at 1080p, where the GPU is not the primary bottleneck. This is a classic CPU-limited scenario that becomes less pronounced as resolution increases and the GPU takes on more work.