Barony

Barony

AVERAGE FPS
262
excellent

This combination delivers exceptional performance with an average of 262 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 85 119 139 186
1440p QHD 163 228 265 356
1080p Full HD 258 361 420 565

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 186
3840x2160 Medium 139
3840x2160 High 119
3840x2160 Ultra 85
2560x1440 Low 356
2560x1440 Medium 265
2560x1440 High 228
2560x1440 Ultra 163
1920x1080 Low 565
1920x1080 Medium 420
1920x1080 High 361
1920x1080 Ultra 258

Barony with AMD Ryzen 5 5500 + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis

The AMD Ryzen 5 5500 paired with the NVIDIA GeForce RTX 5070 Ti lands at rank 405 out of 3717 tested combos in Barony. That places this configuration in the top 11% of all tested pairings, a strong showing for a system built around a mid-range 5000-series CPU. The rank reflects a combination that is heavily GPU-favored at higher resolutions, but the CPU's 6-core/12-thread Zen 3 design with a 3.60 GHz base and 4.20 GHz boost clock is enough to keep the RTX 5070 Ti fed at 1080p. What the data shows is a pairing that excels at delivering high refresh rates across the board, with the bottleneck shifting clearly toward the GPU as resolution increases. For a roguelike that relies on procedural generation and physics calculations, the CPU's single-thread performance matters, and the Ryzen 5 5500 holds its own, but it is the RTX 5070 Ti that dominates the frame rate charts.

How This Combo Ranks

The combo's position at 405 out of 3717 tested combinations places it in the 89th percentile of all pairings tested. This is a strong result, but the delta between this combo and the top of the stack is significant. The GPU's percentileVsAllGpus of 86 and the CPU's percentileVsAllCpus of 73 both contribute to the overall rank, but the GPU is clearly the stronger component in this pairing. Looking at the CPU's nearest rivals, the Ryzen 5 5500 sits within a tight band of performance: it is 0.1% behind the AMD Ryzen AI 5 430, 0.4% behind the Intel Core i5-12500, 0.5% ahead of the Intel Core i7-10700F, and 0.7% behind the Intel Core i5-11600KF. These are negligible differences in average benchmark score, meaning the CPU is not the differentiator here.

The GPU's nearest rivals tell a similar story of tight competition at the top. The RTX 5070 Ti is 0.1% behind the AMD Radeon RX Vega 64, 0.4% ahead of the Intel Arc A550M, 2% behind the AMD Radeon RX 6900 XT, and 3.1% ahead of the AMD Radeon RX 6800 XT. These deltas are small enough that in-game performance will vary more with settings and resolution than with the specific GPU model. The rank of 405 is respectable, but it is not a top-tier position. The data indicates this combo is built for high refresh rate 1440p gaming and very capable 4K, rather than for chasing the absolute highest frame rates at 1080p where the CPU becomes a limiting factor.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the star of this pairing. It brings 16 GB of GDDR7 memory on a 256-bit bus, delivering 896.0 GB/s of bandwidth. This memory configuration is substantial for Barony, a game that can generate complex scenes with many entities and effects. The GPU's base clock is 2295 MHz with a boost of 2452 MHz, and memory runs at 1750 MHz with 28 Gbps effective. These clocks, combined with 8960 shading units and 280 TMUs, produce a pixel rate of 235.4 GPixel/s and a texture rate of 686.6 GTexel/s. In practice, this translates to frame rates that are rarely constrained by the GPU at 1080p or 1440p.

The RTX 5070 Ti's 70 RT cores and 280 tensor cores are present, but Barony is not a ray-traced title, so these features are largely idle. The GPU's FP32 compute of 43.94 TFLOPS is more relevant, as roguelike games often have particle effects and screen-space calculations that scale with raw compute. The 16 GB VRAM is a key asset here; even at 4K Ultra, the game is unlikely to exceed this capacity, and the data shows the GPU maintaining playable frame rates at all tested settings. The GPU's percentileVsAllGpus of 86 confirms it is well above average, and its average benchmark score of 49957 places it in the upper tier of available graphics cards. The 300 W TDP and 700 W suggested PSU are worth noting for any builder, but they are not performance metrics.

Resolution Scaling

The measured FPS data shows a classic GPU-bound scaling pattern from 1080p to 4K, but with an interesting inflection point. At 1080p Low, the combo hits 565 FPS, which is extraordinarily high and indicates the CPU is the primary limiter at this setting. Dropping to 1440p Low yields 356 FPS, a 37% reduction, and 4K Low yields 186 FPS, another 48% drop. These large percentage drops at Low settings confirm that the GPU is taking over the workload as resolution increases. The fact that 1080p Low produces over 500 FPS suggests the Ryzen 5 5500 is the ceiling at this resolution, as the RTX 5070 Ti could likely push even higher if the CPU could keep up.

At High settings, the scaling is more moderate but still steep. 1080p High delivers 361 FPS, 1440p High drops to 228 FPS (a 37% reduction), and 4K High falls to 119 FPS (another 48% drop). This consistent pattern across Low and High settings indicates the GPU is the dominant factor at all resolutions above 1080p. The Ultra settings tell a similar story: 1080p Ultra at 258 FPS, 1440p Ultra at 163 FPS, and 4K Ultra at 85 FPS. The 4K Ultra result is the only one that dips below the 100 FPS mark, and it is still comfortably playable. The data suggests that for a 1080p or 1440p gamer, this combo is overkill for Barony, but for 4K, it is a solid performer that will hold above 60 FPS even at maximum settings.

Measured FPS Breakdown

The measured FPS data provides a complete picture across three resolutions and four settings presets. At 1080p, the combo delivers exceptional performance: Low settings produce 565 FPS, Medium settings produce 420 FPS with a minimum of 357 FPS and maximum of 483 FPS, High settings produce 361 FPS, and Ultra settings produce 258 FPS. The minimum FPS at 1080p Medium is 357, which is higher than the average FPS at 4K High, illustrating how resolution dominates the performance landscape.

At 1440p, the results are still very strong. Low settings yield 356 FPS, Medium settings yield 265 FPS with a minimum of 225 FPS and maximum of 305 FPS, High settings yield 228 FPS, and Ultra settings yield 163 FPS. The 1440p Ultra result of 163 FPS is particularly notable because it suggests this combo can drive high refresh rate 1440p monitors at maximum quality without breaking a sweat. The minimum FPS at 1440p Medium is 225, which is still well above the refresh rate of most high-end monitors.

At 4K, the performance remains respectable but drops off significantly. Low settings produce 186 FPS, which is still very smooth. Medium settings produce 139 FPS with a minimum of 118 FPS and maximum of 159 FPS. High settings produce 119 FPS, and Ultra settings produce 85 FPS. The 4K Ultra result of 85 FPS is the only sub-100 FPS figure in the entire data set, and it is still well within the playable range for a roguelike. The minimum FPS at 4K Medium is 118, which is above the 60 FPS threshold for smooth gameplay, indicating that even the lowest frame rates in this configuration are acceptable.

FAQ

Q: Is the AMD Ryzen 5 5500 a bottleneck for the RTX 5070 Ti in Barony?

A: At 1080p Low, the combo produces 565 FPS, which is exceptionally high and suggests the CPU is the limiting factor at this resolution and settings level. At 1440p and above, the frame rates drop significantly (356 FPS at 1440p Low, 186 FPS at 4K Low), indicating the GPU becomes the primary bottleneck. The CPU's 6 cores and 12 threads with a 4.20 GHz boost are sufficient to avoid being a major constraint at higher resolutions.

Q: How does the RTX 5070 Ti compare to its nearest rivals in synthetic benchmarks?

A: The RTX 5070 Ti has an average benchmark score of 49957. It is 0.1% behind the AMD Radeon RX Vega 64, 0.4% ahead of the Intel Arc A550M, 2% behind the AMD Radeon RX 6900 XT, and 3.1% ahead of the AMD Radeon RX 6800 XT. These deltas are minimal, suggesting in-game performance will be similar across these cards.

Q: What is the best resolution to play Barony with this combo?

A: For maximum smoothness, 1080p Ultra delivers 258 FPS, which is more than enough for any display. For a balance of visual quality and performance, 1440p Ultra at 163 FPS is the sweet spot, offering high fidelity with frame rates well above 144. For 4K, High settings at 119 FPS is the recommended target, as Ultra drops to 85 FPS.

Q: Does the 16 GB VRAM of the RTX 5070 Ti matter for Barony?

A: The 16 GB of GDDR7 memory with 896.0 GB/s bandwidth is more than sufficient for Barony at any resolution and settings. The game's procedural generation and entity-heavy scenes can benefit from the high bandwidth, but the VRAM capacity alone is unlikely to be a limiting factor in this title.

Q: How does the Ryzen 5 5500's single-thread performance affect gameplay?

A: The CPU's single-thread score in Cinebench R23 is 2319, and its 3dmark single-thread score is 836. Barony's game logic and physics calculations rely on single-thread performance, and these scores are adequate for maintaining high frame rates, as evidenced by the 565 FPS at 1080p Low. The CPU is not the primary constraint at higher resolutions.

Q: What is the combo's overall rank and what does it mean?

A: The combo ranks 405 out of 3717 tested combinations, placing it in the top 11% of all pairings. This is a strong result, indicating this system is well-matched for Barony. The GPU's 86th percentile ranking among all GPUs and the CPU's 73rd percentile ranking among all CPUs contribute to this position.

Settings Recommendations

For a 4K display, the data shows that High settings at 119 FPS is the optimal choice. Ultra settings drop to 85 FPS, which is still playable, but the 40% reduction in frame rate for the jump from High to Ultra is not worth the marginal visual improvement in a roguelike where clarity and responsiveness matter. Medium settings at 139 FPS offer a higher margin for dips, but High is the better balance of quality and speed.

For 1440p, Ultra settings at 163 FPS are the clear recommendation. This result is well above the 144 Hz refresh rate that most 1440p monitors offer, and the minimum FPS at Medium settings is 225, indicating the GPU is not stressed. There is no reason to drop below Ultra at this resolution, as the frame rate remains exceptionally high.

For 1080p, the choice depends on whether the user prioritizes frame rate or visual fidelity. Ultra settings at 258 FPS are more than sufficient for any high refresh rate monitor, but High settings at 361 FPS and Medium at 420 FPS offer diminishing returns in smoothness. The data suggests that 1080p Ultra is the best experience, as it provides a high level of visual detail while still delivering frame rates that exceed the refresh rate of virtually all gaming displays. The only setting to avoid is Ultra at 4K, where the 85 FPS average, while playable, does not provide the headroom that the other presets offer.

Hardware Specifications

AMD Ryzen 5 5500

Cores / Threads 6 / 12
Base Clock 3600 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 5070 Ti

VRAM 16 GB GDDR7
Base Clock —
Boost Clock 2452 MHz MHz
TDP 300 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5500 + NVIDIA GeForce RTX 5070 Ti in Barony

Resolution Settings Avg FPS
3840x2160 Low 186.0
3840x2160 Medium 139.0
3840x2160 High 119.0
3840x2160 Ultra 85.0
2560x1440 Low 356.0
2560x1440 Medium 265.0
2560x1440 High 228.0
2560x1440 Ultra 163.0
1920x1080 Low 565.0
1920x1080 Medium 420.0
1920x1080 High 361.0
1920x1080 Ultra 258.0

Barony with Ryzen 5 5500 + Other GPUs

See how Barony performs with the same CPU but different graphics cards.

Barony with RTX 5070 Ti + Other CPUs

See how Barony performs with the same GPU but different processors.

Other Games with Ryzen 5 5500 + RTX 5070 Ti

Explore FPS benchmarks for other games using this same hardware combination.