Overpower

The Overpower benchmark results for the AMD Ryzen 5 4600G paired with the Intel Arc B370 paint a clear picture of a system that is fundamentally constrained by its graphics solution. The CPU, a 6-core/12-thread Zen 2 part, demonstrates solid processing capability in synthetic tests, but the integrated Arc B370 GPU, which relies on system memory and operates at a modest TDP, limits playability to the lower end of the settings spectrum. The data indicates that this combination is best suited for 1080p gaming at low-to-medium presets, where it can maintain acceptable frame rates, rather than pushing higher resolutions or graphical fidelity.

FAQ

Q: What is the best resolution for this CPU and GPU combo in Overpower?

A: Based on the measured FPS, 1920x1080 is the optimal resolution. At this setting, the combo achieves an average of 65 FPS on Low and 41 FPS on Medium, which are the only playable configurations. At 2560x1440, the Low preset drops to 58 FPS, and at 3840x2160, all presets fall below the 50 FPS mark.

Q: How does the Ryzen 5 4600G's CPU performance compare to its closest rivals?

A: The Ryzen 5 4600G has an average benchmark score of 17507, which places it in the 71st percentile of all CPUs. Its closest rival, the AMD Ryzen 3 PRO 5355GE, scores 17482, making the 4600G a mere 0.1% faster. It also leads the Intel Core 7 150U by a 0.6% margin but trails the AMD Ryzen 3 8300GE by 0.6% and the Intel Core i3-14100T by 0.8%.

Q: What is the GPU's performance percentile, and who are its nearest competitors?

A: The Intel Arc B370 sits in the 5th percentile of all GPUs, indicating very low performance relative to the broader market. Its average 3DMark Steel Nomad score of 1184 is nearly identical to that of the ATI Mobility Radeon HD 5570, which scores 1186, a 0.2% difference. It is also 0.5% slower than the ATI Radeon HD 5770 and 0.7% slower than the AMD Radeon HD 7650M, but 1.4% faster than the AMD FirePro M2000.

Q: Does this combo rank high among all tested combinations for Overpower?

A: No, the combo ranks very low. It holds the 2742nd position out of 2980 total tested combinations, placing it in the bottom 8% of all systems benchmarked for this game.

Q: Is the CPU or the GPU the limiting factor in this system?

A: The GPU is definitively the primary bottleneck. The evidence is in the resolution scaling. When moving from 1080p to 4K at the same settings, the frame rate drops significantly (e.g., from 38 FPS to 28 FPS on High). This performance collapse with increased pixel count is characteristic of a GPU-limited scenario. The CPU's synthetic multi-core score of 13593 in Cinebench R23 suggests it has ample headroom for this workload.

Q: What settings provide the most balanced experience?

A: The Low preset at 1920x1080 is the only setting that delivers a solidly playable experience, with an average of 65 FPS. The Medium preset at 1080p is also viable, with an average of 41 FPS, offering a visual upgrade for those who can tolerate a lower frame rate. All presets at higher resolutions or the High/Ultra presets at 1080p fail to reach a smooth 60 FPS.

GPU Role

The Intel Arc B370 is an integrated graphics processor that relies on "System Shared" memory, making its performance heavily dependent on the system's RAM and memory bandwidth. This architecture is a critical factor in the measured results for Overpower. The GPU's specifications, including a boost clock of 2400 MHz and a TDP of just 25 W, point to a design focused on efficiency rather than raw performance. Its 1280 shading units and 20 ROPs, while capable for basic tasks, are insufficient for demanding gaming loads at high resolutions.

The benchmark data shows the GPU's severe performance limitations. Its 3DMark Steel Nomad score of 1184 places it in the 5th percentile, indicating it is slower than the vast majority of graphics solutions, including many from over a decade ago. This low raw performance directly translates to the low frame rates observed in Overpower. The GPU's FP32 compute power of 6.144 TFLOPS is not enough to drive the game's visuals at high detail settings, resulting in average frame rates that are often below the threshold for a smooth experience.

The interaction between the CPU and this GPU is also telling. While the Ryzen 5 4600G provides a solid foundation with its 6 cores and 12 threads, the GPU's role is so dominant in its weakness that the CPU's performance is largely irrelevant in this pairing. The data suggests that even a significantly more powerful CPU would not yield higher frame rates in Overpower, as the Arc B370 is the definitive bottleneck. The GPU's reliance on shared system memory further compounds the issue, as the CPU and GPU must compete for the same memory bandwidth, which can negatively impact performance in memory-intensive scenarios.

Resolution Scaling

The measured FPS data reveals a classic pattern of GPU-bound scaling. As the resolution increases from 1920x1080 to 3840x2160, the average frame rates drop consistently across all settings, but the most revealing data comes from the Low preset, which shows the purest scaling without the added load of complex shaders. At 1080p Low, the combo achieves 65 FPS. This falls to 58 FPS at 1440p, a drop of 7 FPS or roughly 11%. At 4K, it plummets to 49 FPS, a further 9 FPS drop from 1440p and a total decrease of 16 FPS from 1080p.

This scaling pattern confirms that the Intel Arc B370 is the limiting component. If the CPU were the bottleneck, the frame rates would remain relatively constant across resolutions, as the CPU's workload does not change significantly with pixel count. Instead, the consistent decline in performance with each resolution step indicates that the GPU's fill rate and memory bandwidth are being overwhelmed. The pixel rate of 48.00 GPixel/s is simply insufficient for the demands of 4K rendering, even at Low settings.

The data for the Medium preset at each resolution further illustrates this. At 1080p Medium, the average FPS is 41. At 1440p, it drops to 36, and at 4K, it falls to 31. The delta between 1080p and 4K is 10 FPS, showing that the GPU struggles more as the resolution increases. The gap between the Low and Medium presets also widens at higher resolutions, with the difference being 24 FPS at 1080p but only 18 FPS at 4K, suggesting that the GPU's limited resources are less able to handle the extra work of higher settings at larger pixel counts.

How This Combo Ranks

In the grand scheme of all tested systems, this pairing of the AMD Ryzen 5 4600G and the Intel Arc B370 sits at the very bottom of the performance ladder for Overpower. With a rank of 2742 out of 2980 combinations, it is in the 92nd percentile from the bottom, meaning it outperforms only about 8% of all tested systems. This low ranking is overwhelmingly attributable to the GPU, which is in the 5th percentile of all GPUs.

The CPU, in contrast, is a mid-range performer. Its 71st percentile standing among all CPUs suggests it is a competent processor for general tasks and can hold its own in CPU-bound scenarios. However, in this specific game, the GPU's performance ceiling is so low that the CPU's relative strength is completely masked. The combo rank is, therefore, a direct reflection of the GPU's capabilities.

This ranking has practical implications. It signifies that this system is not intended for gaming at high resolutions or with high graphical settings. The measured frame rates for Ultra settings, which average 31 FPS at 1080p, 28 FPS at 1440p, and 24 FPS at 4K, are consistently below the threshold for a playable experience. The data shows that this combo is more suited for esports titles or older games that are not graphically demanding, rather than a modern game like Overpower at high fidelity.

Settings Recommendations

The measured FPS data provides a clear hierarchy for settings. The primary goal should be to achieve a frame rate that is smooth and responsive, generally considered to be 60 FPS or higher. Only one configuration meets this standard: the Low preset at 1920x1080, with an average of 65 FPS. This should be the default recommendation for any user looking for the best gameplay experience with this hardware.

For users who prioritize visual quality over raw frame rate, the Medium preset at 1080p is the only other viable option. It offers an average of 41 FPS, which, while not as fluid as 60 FPS, is still playable for many. The minimum FPS recorded for this setting is 34, which means there will be noticeable stutters in demanding scenes. It is a compromise that trades smoothness for a better-looking image.

All other settings and resolution combinations should be avoided. The High and Ultra presets at any resolution, and the Medium preset at 1440p and above, all yield average frame rates below 40 FPS, with 4K Ultra dipping to a slideshow-like 24 FPS. The data strongly suggests that the graphical overhead of these settings is too much for the Intel Arc B370 to handle. Users should not attempt to use these presets, as the resulting performance will detract from the overall experience.

Measured FPS Breakdown

The following is a complete breakdown of the measured average frame rates for the AMD Ryzen 5 4600G and Intel Arc B370 combination in Overpower.

1920x1080:

• Low: The best-performing configuration, with an average of 65 FPS. This is the only setting that breaks the 60 FPS barrier.
• Medium: Achieves a playable average of 41 FPS, with a minimum of 34 FPS and a maximum of 47 FPS.
• High: Drops to an average of 38 FPS, which is below the ideal smoothness threshold.
• Ultra: The most demanding 1080p preset, yielding an average of 31 FPS.

2560x1440:

• Low: The average FPS falls to 58, a noticeable drop from the 1080p result.
• Medium: Averages 36 FPS, with a minimum of 31 FPS and a maximum of 42 FPS.
• High: Further reduces performance to an average of 34 FPS.
• Ultra: The average drops to 28 FPS, making it a poor choice for gameplay.

3840x2160:

• Low: The average FPS is 49, which is the only 4K configuration to approach playability.
• Medium: Averages 31 FPS, with a minimum of 26 FPS and a maximum of 35 FPS.
• High: The average is 28 FPS, making it difficult to play smoothly.
• Ultra: The lowest recorded performance, with an average of only 24 FPS.

The data confirms that this combo is only suitable for 1080p gaming at Low settings, with Medium being a secondary option. The performance at higher resolutions is consistently below acceptable standards for a modern action game.