Outriders

The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 5060 delivers a highly playable Outriders experience at 1080p and 1440p, but the data clearly shows that 4K Ultra is beyond this combo's reach. The performance curve is steep, with the RTX 5060 emerging as the primary bottleneck at higher resolutions, while the i5-14400F provides ample headroom at lower settings.

Resolution Scaling

The measured FPS data reveals a consistent and predictable decline as resolution increases, but the rate of that decline is the key story. At 1080p with High settings, the combo produces 139.9 FPS. Moving to 1440p High drops that to 90.6 FPS (a 35% reduction), and 4K High plunges to 44.9 FPS (a further 50% reduction from 1440p). This scaling pattern is classic GPU-bound behavior: the RTX 5060's rendering workload scales with pixel count, while the CPU's job remains largely static.

The gap between Low and Ultra settings widens dramatically at higher resolutions. At 1080p, the difference between Low (226.6 FPS) and Ultra (100.7 FPS) is 125.9 FPS. At 1440p, that spread is 99.1 FPS (164.4 vs 65.3). At 4K, the gap narrows to 48.3 FPS (83.5 vs 35.2). This narrowing at 4K indicates that the GPU is so saturated at that resolution that even lowering settings cannot fully compensate—the pixel throughput ceiling dominates.

The data suggests that at 1080p Low, the CPU is likely the limiting factor, as the 226.6 FPS figure approaches the practical ceiling for many game engines. However, for all other measured configurations, the RTX 5060's 8 GB VRAM and 128-bit memory bus are the governing constraints. The 1440p to 4K transition is particularly punishing, with Ultra settings falling from 65.3 FPS to 35.2 FPS—a 46% loss that confirms 4K is only viable at Low or Medium settings.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture with a 5 nm process from TSMC, featuring 21,900 million transistors on a 181 mm² die. Its 8 GB of GDDR7 memory on a 128-bit bus delivers 448.0 GB/s of bandwidth. This memory configuration is the single most important factor in Outriders' 4K performance. At 4K Ultra, the combo only manages 35.2 FPS, which is below the 60 FPS threshold most players consider smooth. The 44.9 FPS at 4K High is marginally better but still not fluid.

The GPU's clock behavior is modest: a base of 2280 MHz and a boost of 2497 MHz. This relatively conservative clock profile, combined with the 145 W TDP, suggests the card is power-limited rather than thermally limited. The 19.18 TFLOPS of FP32 compute is respectable, but the 48 ROPs and 120 TMUs are the likely contributors to the steep 4K drop-off. The pixel rate of 119.9 GPixel/s and texture rate of 299.6 GTexel/s are adequate for 1440p but struggle to feed a 4K framebuffer.

In benchmark terms, the RTX 5060 sits in the 73rd percentile of all GPUs, with scores that place it near the AMD Radeon RX 7700 XT (deltaPct 0) and slightly behind the NVIDIA Tesla M60 (deltaPct 0.5). The gap to the RTX 5070 Mobile is minimal at 0.6%, indicating the desktop card is not far ahead of its mobile sibling. For Outriders specifically, the GPU's 8 GB VRAM appears sufficient at 1080p and 1440p across all settings, but the 4K results imply that texture and geometry data are pushing against capacity limits, causing the steep drop from 83.5 FPS at Low to 35.2 FPS at Ultra.

CPU Role

The Intel Core i5-14400F provides 10 cores and 16 threads, with a base clock of 2.50 GHz and a boost of 4.70 GHz. This Raptor Lake-R architecture part uses a 10 nm process and features 20 MB of shared L3 cache. For Outriders, a looter shooter that relies heavily on physics calculations and enemy AI, the CPU's multithreaded performance is relevant. The Cinebench R23 multicore score of 21914 and the Passmark multithread score of 25783 indicate strong parallel processing capability.

The CPU's single-thread performance is also solid, with a Cinebench R23 single-core score of 3093. This matters because Outriders' core game logic—hit detection, status effects, and co-op networking—often runs on a single main thread. The 4.70 GHz boost clock ensures that this thread can keep up with the GPU at lower resolutions. The data supports this: at 1080p Low, the combo achieves 226.6 FPS, which is high enough that the CPU's per-core performance becomes the ceiling rather than the GPU.

In the broader CPU landscape, the i5-14400F ranks in the 88th percentile of all processors, with an average benchmark score of 32508. Its nearest rivals are tightly clustered: the Intel Core i7-12800H matches its score exactly (deltaPct 0), while the AMD Ryzen 5 PRO 7645 is 0.2% behind, and the Intel Core i7-13705H is 0.2% ahead. This clustering shows that the i5-14400F is at the top of its performance tier, providing no meaningful CPU bottleneck for the RTX 5060 in Outriders at any measured resolution. The 65 W TDP and dual-channel memory support (DDR4/DDR5) round out a package that is clearly not the limiting component in this configuration.

How This Combo Ranks

The Core i5-14400F + RTX 5060 combination ranks 784th out of 1693 tested combos in Outriders, placing it in the 46th percentile of all systems in the database. This mid-pack ranking might seem surprising given the strong individual component scores, but it reflects the reality that Outriders is more demanding on the GPU than on the CPU. Many combos with weaker CPUs but stronger GPUs—particularly those with more VRAM or wider memory buses—will outrank this pairing at 4K.

The ranking indicates that while this combo is competent, it is not exceptional for this specific game. The 784th position suggests that roughly half of all tested systems achieve better average FPS in Outriders. This is consistent with the measured data: the combo delivers excellent 1080p and 1440p results, but the 4K Ultra score of 35.2 FPS drags down its overall standing. For players targeting 1440p as their primary resolution, this combo is well-suited; for 4K enthusiasts, it falls short of what higher-ranked combos likely achieve.

FAQ

Q: What is the best resolution for this combo in Outriders?

A: The data shows 2560x1440 is the sweet spot. At High settings, it delivers 90.6 FPS, which is smooth and visually detailed. 1080p offers higher frame rates (139.9 FPS at High) but with less visual fidelity, while 4K drops below 60 FPS at all settings except Low (83.5 FPS).

Q: Can this setup handle 4K gaming in Outriders?

A: Only at Low settings, where it achieves 83.5 FPS. Medium drops to 60.6 FPS (borderline playable), High falls to 44.9 FPS, and Ultra is unplayable at 35.2 FPS. The 8 GB VRAM and 128-bit memory bus are the limiting factors.

Q: How does the CPU compare to its nearest rivals?

A: The i5-14400F's average benchmark score of 32508 is essentially tied with the Intel Core i7-12800H (deltaPct 0), while it is 0.2% ahead of the AMD Ryzen 5 PRO 7645 and 0.2% behind the Intel Core i7-13705H. This places it in a tightly competitive tier.

Q: What is the GPU's performance percentile?

A: The RTX 5060 ranks in the 73rd percentile of all GPUs, with an average benchmark score of 30109. Its closest rival is the AMD Radeon RX 7700 XT (deltaPct 0), and it is 0.5% behind the NVIDIA Tesla M60.

Q: Does the CPU bottleneck the GPU in this game?

A: No. At 1080p Low, the combo reaches 226.6 FPS, which is near the practical engine limit. In all other measured configurations, the GPU is the limiting component, as evidenced by the steep FPS drops at higher resolutions and settings.

Q: What are the key specs of the GPU for Outriders?

A: The RTX 5060 has 8 GB of GDDR7 memory, 3840 shading units, 48 ROPs, and a boost clock of 2497 MHz. Its 448.0 GB/s memory bandwidth is adequate for 1080p and 1440p, but the 4K results indicate it is insufficient for Ultra settings at that resolution.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings produce 226.6 FPS, Medium drops to 186.3 FPS, High achieves 139.9 FPS, and Ultra bottoms out at 100.7 FPS. This resolution shows a wide spread between settings, with Ultra still comfortably above 100 FPS.

At 2560x1440, performance remains strong. Low hits 164.4 FPS, Medium sustains 116.6 FPS, High holds 90.6 FPS, and Ultra manages 65.3 FPS. The transition from High to Ultra costs 25.3 FPS, a significant penalty for the extra visual effects.

At 3840x2160, the GPU struggles. Low produces 83.5 FPS, Medium falls to 60.6 FPS, High drops to 44.9 FPS, and Ultra collapses to 35.2 FPS. Only the Low preset achieves a fluid experience at 4K, and even then, it is below the refresh rate of most high-end monitors.

Settings Recommendations

For 1080p gaming, the Ultra preset is the clear choice. The 100.7 FPS average is well above the 60 FPS threshold, and the visual improvements over High settings are worthwhile given the performance headroom. Players with 144 Hz or higher refresh rate monitors might prefer High at 139.9 FPS, but the data shows Ultra remains viable.

At 1440p, the High preset offers the best balance. The 90.6 FPS average is smooth, and the gap to Ultra (65.3 FPS) suggests that the Ultra preset's additional effects—likely volumetric lighting and shadow quality—cost 25.3 FPS without a proportional visual gain. Medium at 116.6 FPS is an option for competitive play, but High is recommended for most players.

For 4K, only the Low preset is recommended. The 83.5 FPS result is the only configuration above 60 FPS, and the Medium preset's 60.6 FPS is borderline. High (44.9 FPS) and Ultra (35.2 FPS) are not suitable for a smooth experience. Since the game is a looter shooter with heavy action sequences, maintaining frame rate is more important than maxing out visual quality at this resolution. In summary, the optimal experience is 1440p High, which delivers 90.6 FPS with strong visual fidelity and no compromise on gameplay fluidity.