Outriders

The AMD Ryzen 7 5700G paired with the Intel Arc B580 presents a fascinating case study in Outriders, a looter shooter known for its explosive particle effects and demanding Unreal Engine foundation. The measured frame rates across resolutions and settings reveal a system that is clearly capable of high refresh rates at 1080p but struggles to maintain playable performance at 4K, indicating a significant bottleneck that shifts depending on the workload.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The most striking observation from the data is the dramatic performance cliff as resolution increases. At 1080p with High settings, the combo delivers a robust 110.3 FPS average. Moving to 1440p, the average drops to 68.8 FPS, a 37.6% reduction. The jump to 4K is even more punishing, with the average plummeting to 32.3 FPS—a 70.7% decrease from the 1080p figure. This scaling pattern is a textbook indicator of a GPU-bound scenario at higher resolutions.

At 1080p, the frame rate is likely influenced by the CPU’s ability to feed the GPU. The Ryzen 7 5700G’s 8 cores and 16 threads are sufficient, but the data suggests that at 1440p and 4K, the Intel Arc B580’s rendering throughput becomes the limiting factor. The 4K results are particularly telling—even on Low settings, the system only manages 62.6 FPS, while the jump from Medium (46.5 FPS) to Ultra (26.8 FPS) shows a 42.4% performance penalty. This non-linear scaling between settings at 4K points to the GPU’s memory bandwidth and shader capacity being saturated, rather than any CPU limitation. In contrast, the 1080p scaling from Low to Ultra (195.1 FPS down to 78.9 FPS) is more gradual, suggesting a more balanced workload where the CPU can keep up with the GPU’s demands.

The implication is clear: for this specific combination, 1080p is the sweet spot for high refresh rate gaming, while 1440p is a playable compromise, and 4K is only viable at the lowest settings or for less demanding scenes.

GPU Role — VRAM, clocks, and how they relate to this game's results

The Intel Arc B580 is a 12 GB GDDR6 card with a 192-bit memory bus, delivering a bandwidth of 456.0 GB/s. Its base and boost clocks are both listed at 2670 MHz. With 2560 shading units and 80 ROPs, the GPU’s theoretical pixel rate is 213.6 GPixel/s. These specifications are central to understanding the 4K performance. The 12 GB VRAM is ample for Outriders at any resolution, so capacity is not the issue. Instead, the 4K Ultra result of 26.8 FPS suggests that the GPU’s raw compute power (13.67 TFLOPS FP32) and texture fill rate (427.2 GTexel/s) are simply insufficient for the game’s highest visual fidelity at that resolution.

The data indicates a GPU that is strong for 1080p and 1440p gaming but is positioned as a mid-range part. Its performance percentile of 66 vs all GPUs reinforces this. Interestingly, the GPU’s nearest rival, the NVIDIA GeForce RTX 4060, has an average benchmark score that is only 0.7% higher, according to the deltaPct. Yet, the B580’s 4K High score of 32.3 FPS suggests that in a real-world title like Outriders, the architectural differences (Xe2-HPG vs. Ada Lovelace) can lead to significant performance variations that raw synthetic benchmarks might not fully capture. The 2670 MHz clock speed is high, but the GPU’s 190 W TDP suggests it is power-constrained, which could limit sustained boost clocks under heavy load, further impacting 4K performance.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 5700G is a Zen 3 architecture processor with 8 cores and 16 threads, running on the older AM4 socket with PCIe Gen 3. Its base clock of 3.80 GHz and boost clock of 4.60 GHz are competitive. In synthetic tests, it scores 8,717 in Cinebench R20 multicore and 1,230 in single-core, with a Passmark multithread score of 24,419. This puts it in the 83rd percentile of all CPUs, indicating strong multi-threaded performance.

In Outriders, the CPU’s role becomes evident when examining the 1080p performance. The jump from 110.3 FPS at High to 143.2 FPS at Medium (a 29.8% increase) and then to 195.1 FPS at Low suggests that the CPU is capable of pushing frame rates well beyond 144 FPS. The fact that we see such high numbers at 1080p Low indicates that the CPU is not a bottleneck at lower resolutions. However, the data also shows a potential limitation: the CPU’s L3 cache is 16 MB. For a game like Outriders, which features large open environments and many AI entities, a larger L3 cache might help maintain higher minimum frame rates, but the average FPS data here shows no such issue.

The CPU’s PCIe Gen 3 interface, rather than Gen 4, could theoretically limit data transfer to the GPU, but the high frame rates at 1080p suggest this is not a practical bottleneck. The Ryzen 7 5700G’s nearest rival, the AMD Ryzen 7 6800U, has a nearly identical average score (25,706 vs 25,626), with a deltaPct of -0.3%, meaning the 5700G is slightly behind in synthetic benchmarks. Yet, in gaming, the 5700G’s higher TDP (65 W vs. the mobile chip) likely allows for more sustained performance. The data suggests the CPU is a solid partner for the B580, providing enough headroom to ensure the GPU is the primary limiter at higher resolutions.

Settings Recommendations — which preset gives the best experience per the measured rows

For a smooth and visually pleasing experience at 1080p, the High preset is the clear winner, delivering 110.3 FPS. This is well above the 60 FPS threshold and leaves headroom for demanding scenes. While Ultra offers a higher visual quality, the drop to 78.9 FPS is a significant 28.5% decrease, which may not be worth the visual uplift for competitive play. For those chasing maximum frame rates, Low at 195.1 FPS is an option, but it compromises visual fidelity unnecessarily.

At 1440p, the data suggests a tighter decision. High settings yield 68.8 FPS, which is solid for a single-player looter shooter. Medium settings provide a more comfortable 91.7 FPS, a 33.3% increase over High, at a moderate visual cost. Given that 1440p is a middle ground, the Medium preset offers the best balance between image quality and performance, ensuring the action stays fluid. Ultra at 51.8 FPS is playable but risks dipping below 60 FPS in busy combat.

The 4K data strongly argues against pushing settings. Ultra at 26.8 FPS is unplayable, and High at 32.3 FPS is also below the playability threshold. Medium at 46.5 FPS is borderline, but Low at 62.6 FPS is the only preset that provides a consistently smooth experience. Therefore, for 4K, the recommendation is to use Low settings, accepting a significant reduction in visual quality for a playable framerate.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the best resolution for this CPU/GPU combo in Outriders?

A: The data shows 1920x1080 provides the best performance, with a High preset achieving 110.3 FPS average. This resolution allows for the highest settings without compromising smoothness, unlike 2560x1440 and 3840x2160, which show significant drops at higher presets.

Q: Can this system handle 4K gaming in Outriders?

A: Yes, but only at the lowest settings. The measured FPS at 3840x2160 ranges from 26.8 FPS at Ultra to 62.6 FPS at Low. Only the Low preset provides a consistently smooth experience, while Medium (46.5 FPS) is borderline and High/Ultra are not recommended.

Q: Is the CPU or GPU the bottleneck at 1080p?

A: At 1080p, the system is likely GPU-bound at higher settings. The CPU’s performance is evidenced by the 195.1 FPS result at Low settings, which shows it can push very high frame rates. The drop to 110.3 FPS at High settings indicates the GPU’s rendering workload is the limiting factor.

Q: How does the Arc B580 compare to the RTX 4060 in synthetic benchmarks?

A: According to the nearestRivals data, the NVIDIA GeForce RTX 4060 has an average benchmark score that is 0.7% higher than the Intel Arc B580. This suggests they are closely matched in raw compute potential, though real-world gaming results may vary.

Q: What is the frame rate difference between Medium and Ultra at 1440p?

A: At 2560x1440, the Medium preset averages 91.7 FPS, while the Ultra preset averages 51.8 FPS. This represents a 39.9 FPS difference, with Ultra offering a 43.5% lower frame rate than Medium.

Q: How many frames per second does the combo achieve at 1080p Medium?

A: The measured average FPS at 1920x1080 with Medium settings is 143.2 FPS. This is a strong result, indicating that this preset is highly playable and offers a good balance between visual quality and speed.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

1920x1080:

• Low: 195.1 FPS
• Medium: 143.2 FPS
• High: 110.3 FPS
• Ultra: 78.9 FPS

2560x1440:

• Low: 123.7 FPS
• Medium: 91.7 FPS
• High: 68.8 FPS
• Ultra: 51.8 FPS

3840x2160:

• Low: 62.6 FPS
• Medium: 46.5 FPS
• High: 32.3 FPS
• Ultra: 26.8 FPS

The data reveals a consistent pattern: the performance delta between Low and Ultra widens as resolution increases. At 1080p, the gap is 116.2 FPS (195.1 vs 78.9). At 1440p, it narrows to 71.9 FPS (123.7 vs 51.8). At 4K, the gap shrinks further to 35.8 FPS (62.6 vs 26.8). This indicates that at higher resolutions, the GPU’s limitations in pixel fill rate and memory bandwidth become the dominant factor, making the setting choice less impactful on absolute performance.

How This Combo Ranks — use comboRankInGame vs other tested combos

This specific combination of the AMD Ryzen 7 5700G and Intel Arc B580 ranks at 1305 out of 1693 tested combos in Outriders. This places it in the lower 23% of all tested systems, which is a surprising result given the individual component scores. The CPU ranks in the 83rd percentile, and the GPU in the 66th percentile, yet their combined performance in this game is below average.

This discrepancy suggests that the pairing is not optimal for Outriders. The rank implies that a significant number of other CPU/GPU combinations deliver higher average FPS. While the CPU and GPU are both mid-to-high tier parts, their interaction in this specific game may be hindered by a driver, architectural, or memory bandwidth issue. For context, the GPU’s nearest rival, the RTX 4060, is only 0.7% faster in synthetic tests, but its real-world performance in this title could be substantially different, potentially explaining why the combo rank is not higher. The low rank is a cautionary tale that synthetic benchmarks do not always translate directly to game performance, and the specific demands of Outriders, such as its particle effects and physics, may disproportionately favor other architectures.