Outriders

The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 5060 combination ranks 859th out of 1,693 tested combos in Outriders, placing it in the 49th percentile of all configurations. That middle-of-the-pack standing is not a slight against the hardware; rather, it reflects how the pairing lands in a crowded field where many systems sit within a narrow performance band. The data shows a combo that is perfectly capable of delivering a smooth experience at mainstream resolutions, though it does not push into the upper echelon of results. For a looter shooter that rewards consistent framerates during chaotic firefights, this rank indicates a balanced setup that should not bottleneck the gameplay loop.

How This Combo Ranks

The 859th rank out of 1,693 combos puts this pairing almost exactly at the median, a position that suggests the CPU and GPU are well-matched for this title. Neither component is drastically over- or under-powered relative to the other, which is the hallmark of a sensible pairing. In a game like Outriders, where the action can scale from quiet exploration to screen-filling particle effects, having a balanced system prevents one component from holding the other back. The CPU’s average benchmark score of 21,765 places it 79th percentile among all processors, while the GPU’s average score of 30,109 sits at the 73rd percentile for graphics cards. When both components perform near their respective percentile marks, the resulting combo rank in the middle of the pack makes sense.

The nearest rival CPUs tell a story of tight competition. The Ryzen 5 5600 is just 0.6% ahead of the Intel Xeon D-1746TER, and it trails the AMD EPYC 9554P by the same margin. More relevant for gaming, it sits 0.9% behind the Intel Core i7-11700F, a chip that is often found in gaming rigs. These sub-1% deltas mean that swapping in any of these processors would produce nearly identical results in Outriders, confirming that the CPU is not the limiting factor here. On the GPU side, the RTX 5060 is effectively tied with the AMD Radeon RX 7700 XT, showing a 0% delta, and it edges out the NVIDIA Tesla M60 by just 0.5%. This level of parity means the graphics card’s performance class is well-established, and the measured FPS below are a direct reflection of what that class delivers.

GPU Role

The RTX 5060 brings 8 GB of GDDR7 memory on a 128-bit bus, providing 448.0 GB/s of bandwidth. That memory configuration is sufficient for Outriders at the resolutions tested, though the data suggests it starts to strain at 4K. The GPU’s 30 ray tracing cores and 120 tensor cores are present but not heavily utilized in this title, as the measured results are purely rasterization-focused. The boost clock of 2497 MHz and base clock of 2280 MHz are solid figures that contribute to the card’s 19.18 TFLOPS of FP32 performance. With a pixel rate of 119.9 GPixel/s and texture rate of 299.6 GTexel/s, the card has the raw throughput to handle the game’s environments, but the 8 GB frame buffer becomes a limiting factor at higher resolutions.

Looking at the measured FPS, the GPU’s role becomes clearer. At 1920x1080, the card is rarely the bottleneck, delivering framerates well above 100 FPS even at Ultra settings. At 2560x1440, it still holds its own, with the Ultra preset dropping to 64.9 FPS, which is playable but not silky smooth. The 3840x2160 results show the card’s limits: Ultra settings drop to 33.2 FPS, and even High settings only reach 44 FPS. The jump from Low to Medium at 4K is a 31.7% decrease in performance, from 87 FPS to 60.5 FPS, which shows how quickly the GPU’s resources are consumed as visual fidelity increases. The memory bandwidth of 448.0 GB/s is adequate for 1080p and 1440p, but at 4K, the combination of the 128-bit bus and 8 GB capacity means the card is often waiting on data rather than processing it.

Settings Recommendations

The measured data points to a clear sweet spot for this combo: the Medium preset at 2560x1440. At this setting, the system produces 116.6 FPS, which is comfortably above the 60 FPS threshold and provides headroom for the dips that can occur during intense combat. Moving up to High at the same resolution drops the average to 90.9 FPS, which is still very playable, but the extra visual fidelity comes at a 22% performance cost. For players with high refresh rate 1080p monitors, the High preset at 143.5 FPS is the better choice, as it balances visual quality with a framerate that can take advantage of 144 Hz displays.

At 4K, the options are more limited. The Low preset at 87 FPS is the only setting that delivers a consistently smooth experience, but it sacrifices much of the game’s visual detail. Medium at 4K drops to 60.5 FPS, which is technically playable but leaves little margin for error. The data suggests that 4K is not this combo’s intended playground; the 44 FPS at High and 33.2 FPS at Ultra are below the threshold for a comfortable experience. For most users, sticking to 1440p Medium or 1080p High will provide the best balance of image quality and performance, with the exact choice depending on whether the display is 1440p or 1080p.

Measured FPS Breakdown

At 1920x1080, the RTX 5060 shows its strength. The Low preset produces 199.7 FPS, which is a massive 39% improvement over the Medium preset’s 175.7 FPS. High settings bring the average down to 143.5 FPS, still a strong result, while Ultra drops to 100.2 FPS. The scaling from High to Ultra is a 30% reduction, indicating that the Ultra preset introduces effects that are disproportionately expensive relative to their visual impact. For 1080p users, the data makes a strong case for staying at High unless the game’s Ultra effects are worth the 43 FPS loss.

Moving to 2560x1440, the performance curve steepens. Low settings hit 163.4 FPS, which is still excellent, but Medium drops to 116.6 FPS, a 29% decrease. High comes in at 90.9 FPS, and Ultra falls to 64.9 FPS. The gap between High and Ultra at 1440p is 26 FPS, or roughly 29%, which mirrors the 1080p trend. At this resolution, the GPU is starting to feel the pressure, but it remains capable of delivering playable framerates across all presets. The 64.9 FPS at Ultra is just above the 60 FPS line, making it a viable option for players who prioritize visual fidelity over a high refresh rate.

At 3840x2160, the results are a different story. Low produces 87 FPS, which is the only preset that clears the 60 FPS threshold comfortably. Medium drops to 60.5 FPS, which is marginal, and High falls to 44 FPS, which is below the threshold for smooth gameplay. Ultra bottoms out at 33.2 FPS. The scaling from Low to Medium is a 30.5% decrease, but the jump from Medium to High is a 27.3% decrease, and High to Ultra is a 24.5% decrease. This consistent degradation shows that each step up in visual quality at 4K costs roughly a quarter of the remaining performance, making the higher presets impractical for this combo.

FAQ

Q: Can this combo handle 4K gaming in Outriders?

A: Only at Low settings, where it achieves 87 FPS. Medium drops to 60.5 FPS, High falls to 44 FPS, and Ultra is unplayable at 33.2 FPS.

Q: What is the best settings preset for 1440p?

A: Medium at 1440p delivers 116.6 FPS, which provides the best balance of visual quality and performance. High is also viable at 90.9 FPS.

Q: How does the RTX 5060 compare to its nearest rival, the RX 7700 XT?

A: The two cards have identical average benchmark scores, with a 0% delta, meaning they perform at the same level in synthetic tests.

Q: Is the Ryzen 5 5600 a bottleneck for this GPU?

A: The CPU’s average benchmark score is 0.9% behind the Intel Core i7-11700F, and its 79th percentile ranking suggests it is not holding back the GPU in this title.

Q: What framerate can I expect at 1080p Ultra?

A: The measured average is 100.2 FPS, which is playable but 43 FPS lower than the High preset’s 143.5 FPS.

Q: Does the GPU’s 8 GB of memory limit performance?

A: At 4K, the framerate drops sharply from 87 FPS at Low to 60.5 FPS at Medium, indicating that the memory capacity and bandwidth are constraints at that resolution.

CPU Role

The AMD Ryzen 5 5600 is a 6-core, 12-thread processor based on the Zen 3 architecture, running at a 3.50 GHz base clock and 4.40 GHz boost clock. Its 32 MB of shared L3 cache is a significant asset for gaming, as it reduces the latency penalty when threads need to share data. The CPU’s benchmark results show a strong single-thread performance, with a Cinebench R23 single-core score of 2,584, which is crucial for a game like Outriders that relies on a primary game thread. The multi-threaded score of 18,309 in the same test indicates that the 12 threads can handle background tasks without impacting the main game loop.

In Outriders, the CPU’s role is to maintain a steady framerate floor, particularly when the GPU is not the limiting factor. At 1080p Low, the system achieves 199.7 FPS, and at 1440p Low it hits 163.4 FPS, both of which are well above what the GPU can deliver at higher settings. This indicates that the CPU has headroom to spare. The 79th percentile ranking among all CPUs, combined with a 0.9% delta behind the Intel Core i7-11700F, places it in a solid position for this title. The processor’s 65 W TDP and 7 nm process node mean it runs cool and efficient, leaving thermal headroom for the GPU to operate at its boost clock. The data shows that the Ryzen 5 5600 does its part, feeding the RTX 5060 with enough data to keep framerates high at the resolutions where the GPU can keep up.