Lockdown Protocol

Lockdown Protocol is a demanding FPS title, and the combination of the Intel Core Ultra 7 155H and NVIDIA GeForce RTX 4080 delivers a powerful, though resolution-dependent, experience. The data shows a system that is firmly GPU-limited at higher resolutions, while at 1080p, CPU performance becomes a significant factor in achieving the highest frame rates. This analysis breaks down the measured performance, component roles, and optimal settings for this specific hardware pairing.

Resolution Scaling

The measured FPS data reveals a clear and consistent scaling pattern as resolution increases from 1920x1080 to 3840x2160. At the High preset, the average frame rate drops from 148 FPS at 1080p to 109 FPS at 1440p, and finally to 70 FPS at 4K. This represents a 26% decrease from 1080p to 1440p, and a further 36% decrease from 1440p to 4K. The frame rate drop from 1080p to 4K is a substantial 53%, indicating that the rendering load is scaling heavily with pixel count.

This scaling pattern strongly suggests that the NVIDIA GeForce RTX 4080 is the primary limiting component at 1440p and 4K resolutions. The GPU's 16 GB of GDDR6X memory and 716.8 GB/s of bandwidth are being tasked with rendering an increasing number of pixels, and the performance penalty reflects that. The frame rate at 4K High, 70 FPS, is still playable, but it is a far cry from the high refresh rate territory achievable at 1080p. The data indicates that players targeting 4K will need to make compromises in settings to approach higher frame rates.

At 1920x1080, the scaling pattern changes slightly. The jump from 1080p High (148 FPS) to 1440p High (109 FPS) is a 26% drop, but the jump from 1440p High to 4K High is a steeper 36% drop. This non-linear scaling is typical of a system where the CPU can keep up with the GPU at lower resolutions but the GPU becomes the bottleneck as resolution increases. At 1080p, the system is likely able to feed the GPU with enough frames, but the GPU's rendering capability is still the ceiling. The drop from 239 FPS at 1080p Low to 175 FPS at 1440p Low is a 27% reduction, showing that even at the lowest settings, the pixel count is the dominant factor.

The data suggests that for a consistent high-refresh-rate experience, 1440p is the sweet spot, offering a substantial improvement over 4K while still being far more demanding than 1080p. The 4K Ultra preset, with an average of 53 FPS, is the most demanding configuration measured and will push the system to its limits. The measured rows show that the RTX 4080 is a capable 4K card, but it is not able to maintain the same high frame rates at 4K as it does at lower resolutions, confirming its role as the primary bottleneck in this configuration.

CPU Role

The Intel Core Ultra 7 155H is a 16-core, 22-thread mobile processor based on the Meteor Lake architecture. Its multi-threaded performance, as measured by Cinebench R23, is 15028 points, and its single-thread score is 1743 points. These scores place the CPU in the 83rd percentile of all tested processors, indicating strong overall performance. The CPU's boost clock of 4.80 GHz and 24 MB of shared L3 cache contribute to its ability to handle gaming workloads.

In Lockdown Protocol, the CPU's role is most apparent at 1920x1080 resolution. At 1080p Low, the system achieves an average of 239 FPS. This is the highest frame rate measured across all configurations, and it suggests that the CPU is capable of feeding the GPU with a very high number of frames at this resolution. Moving to 1080p Medium, the frame rate drops to 170 FPS, and at High, it is 148 FPS. The gap between Low and Medium (69 FPS) is significant, indicating that the game's CPU load increases with settings, but the CPU is still able to maintain high performance.

The CPU's single-thread performance is likely the key factor here. Lockdown Protocol, being an FPS title, often relies on a few primary threads for game logic and physics. The Core Ultra 7 155H's single-core score of 1743 in Cinebench R23 is competitive, and the data suggests it is enough to avoid becoming a major bottleneck at 1080p, at least up to the High preset. The fact that the frame rate at 1080p Ultra (111 FPS) is lower than at 1080p High (148 FPS) shows that the GPU is still the limiting factor even at this resolution when settings are maxed out.

The CPU's overall performance is comparable to its nearest rivals. Its average benchmark score of 32697 is nearly identical to the Intel Core i5-14600T (32707, deltaPct 0) and the AMD Ryzen AI 7 PRO 360 (32662, deltaPct 0.1). This indicates that the Core Ultra 7 155H is well-matched with other mid-to-high-end processors in synthetic tests. In gaming, the data shows that this CPU is not holding back the RTX 4080 at 1080p, as the system is able to reach 239 FPS on Low settings, which is a very high frame rate. However, the scaling from 1080p to 1440p shows that the GPU becomes the primary limit, suggesting the CPU has headroom.

The 7 nm process node and 28 W TDP classify this as a mobile-focused chip, but its performance in this game's data is substantial. The measured results indicate that the CPU is a capable partner for the RTX 4080, providing enough throughput to exploit the GPU's power at lower resolutions and not becoming a significant drag on performance at higher resolutions.

GPU Role

The NVIDIA GeForce RTX 4080 is a high-end graphics card based on the Ada Lovelace architecture. It features 16 GB of GDDR6X memory on a 256-bit bus, providing a memory bandwidth of 716.8 GB/s. The GPU has a boost clock of 2505 MHz and 9728 shading units. Its raw compute power is rated at 48.74 TFLOPS for FP32 operations. The card's performance places it in the 86th percentile of all GPUs, with an average benchmark score of 54247.

The GPU is clearly the dominant component in this system for Lockdown Protocol. This is most evident at 3840x2160 resolution, where the frame rates are significantly lower than at other resolutions. At 4K High, the average FPS is 70, and at 4K Ultra, it drops to 53 FPS. These numbers illustrate the immense rendering load placed on the GPU at 4K. The RTX 4080's 16 GB of VRAM is a key asset here, as it provides ample capacity for high-resolution textures and assets without running into memory limitations.

The GPU's performance relative to its nearest rivals is noteworthy. Its average score of 54247 is almost identical to the NVIDIA GeForce RTX 4080 SUPER (54209, deltaPct 0.1). This means the standard RTX 4080 is performing at the same level as its SUPER counterpart in synthetic benchmarks. The data shows that in this game, the GPU's capabilities are the primary determinant of frame rate, especially as resolution increases. The transition from 1440p High (109 FPS) to 4K High (70 FPS) is a 36% drop, which is a direct result of the GPU's rendering limits.

The GPU's memory bandwidth of 716.8 GB/s is likely a critical factor in feeding the 16 GB of VRAM, especially at 4K where large amounts of texture data need to be streamed quickly. The measured FPS data shows a clear hierarchy: the GPU is the bottleneck at 1440p and 4K, while the CPU becomes more relevant at 1080p. The card's 76 RT cores and 304 tensor cores, while not explicitly tested in this game's data, are part of its feature set that could impact performance in other titles.

The RTX 4080 is an end-of-life product per the data, but its performance in Lockdown Protocol remains strong. The benchmark results indicate that while it can handle 4K at playable frame rates, it is most comfortable at 1440p, where it delivers high frame rates across all settings. The GPU's role is to render the game at the chosen resolution and settings, and the data shows it does so with decreasing efficiency as resolution climbs, cementing its status as the main performance limiter in this pairing.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this hardware combination depend heavily on the target resolution and desired frame rate. The data provides clear guidance for each resolution tier.

At 3840x2160, the High preset offers the best balance, with an average of 70 FPS. This is a playable frame rate for most users. The Ultra preset drops to 53 FPS, which may be too low for a smooth experience in a fast-paced FPS. The Medium preset provides 80 FPS, which is a 14% improvement over High, but the visual quality reduction may not be worth the frame rate gain. The Low preset at 4K delivers 113 FPS, which is a large jump, but it comes with a significant visual compromise. For a smooth 4K experience, High is the recommended preset, as it maintains a solid frame rate while preserving most visual fidelity. The Medium preset is a viable alternative for users who prefer higher frame rates.

At 2560x1440, the High preset is the clear winner, delivering an average of 109 FPS. This is well within high-refresh-rate territory. The Ultra preset at 81 FPS is also playable, but the 28 FPS drop from High to Ultra suggests that the visual gains from Ultra are not worth the performance cost. The Medium preset at 124 FPS is an option for those seeking even higher frame rates, but High offers a better balance of image quality and performance. The Low preset at 175 FPS is exceptionally fast, but the visual downgrade is substantial. For 1440p, High is the recommended preset, offering a great experience for competitive and immersive play.

At 1920x1080, the High preset delivers 148 FPS, which is excellent. The Medium preset at 170 FPS is also very good, offering a 15% frame rate increase over High. The Ultra preset at 111 FPS is the most demanding, and while it is still smooth, it represents a significant drop from High. The Low preset at 239 FPS is the maximum performance option, ideal for competitive players with 240Hz monitors. For most users at 1080p, the Medium or High presets are recommended, as they provide a great balance. The data shows that the system is capable of very high frame rates at this resolution, and the choice between Medium, High, and Ultra should be based on personal preference for visual quality versus raw speed.

In summary, the data recommends High presets for 1440p and 4K, and Medium or High for 1080p, depending on whether the user prioritizes frame rate or visual fidelity. The Low preset is available for maximum performance, while Ultra is for those who want the best image quality and can accept lower frame rates.

How This Combo Ranks

The combination of the Intel Core Ultra 7 155H and NVIDIA GeForce RTX 4080 ranks 1202 out of 3714 tested combos in Lockdown Protocol. This places the system in the upper half of all configurations tested, specifically in the 68th percentile (1202/3714). This is a strong ranking, indicating that this hardware pairing performs well relative to the broader field of tested systems.

The ranking reflects the balance between the CPU and GPU. The RTX 4080 is a high-end GPU, and the Core Ultra 7 155H is a capable mobile processor. The data shows that this combination is able to deliver high frame rates at 1440p and playable frame rates at 4K, which is a solid performance profile. The rank of 1202 out of 3714 means that there are 1201 tested combos that perform better, and 2512 that perform worse. This puts the combo in the top third of all tested systems.

The fact that the GPU is the primary bottleneck at higher resolutions means that the overall rank is largely determined by the GPU's performance. The RTX 4080's percentile of 86 among all GPUs is higher than the combo's percentile of 68, which suggests that the CPU is slightly holding back the system from achieving an even better rank. The CPU's percentile of 83 is also high, but the combination is not perfectly balanced. The data indicates that in some configurations, a more powerful CPU could push the system to a higher ranking, but for most users, the current pairing offers a strong performance level.

The ranking is a useful metric for comparing this specific system to all other tested combinations. The data shows that this is a well-performing combo, capable of running Lockdown Protocol at high settings with good frame rates. The rank of 1202 is a positive indicator, and the system is clearly not a low-end performer. The high GPU percentile is the main driver of this rank, and the CPU's performance is sufficient to avoid being a major hindrance.

Measured FPS Breakdown

The following is a detailed breakdown of the measured FPS data for Lockdown Protocol with the Intel Core Ultra 7 155H and NVIDIA GeForce RTX 4080.

At 3840x2160, the performance is as follows:

• Low settings: The average FPS is 113. This is the highest frame rate at 4K, showing that even at this resolution, lowering settings can unlock high performance.
• Medium settings: The average FPS is 80, with a minimum of 68 and a maximum of 92. This provides a stable, playable experience.
• High settings: The average FPS is 70. This is a good balance for 4K, offering solid performance.
• Ultra settings: The average FPS is 53. This is the most demanding setting at 4K and results in a lower frame rate.

At 2560x1440, the performance is as follows:

• Low settings: The average FPS is 175. This is a very high frame rate, suitable for fast-paced play.
• Medium settings: The average FPS is 124, with a minimum of 106 and a maximum of 143. This is a smooth experience.
• High settings: The average FPS is 109. This is an excellent frame rate for 1440p gaming.
• Ultra settings: The average FPS is 81. This is still playable, but lower than High.

At 1920x1080, the performance is as follows:

• Low settings: The average FPS is 239. This is a very high frame rate, ideal for high-refresh-rate monitors.
• Medium settings: The average FPS is 170, with a minimum of 144 and a maximum of 195. This is a great balance.
• High settings: The average FPS is 148. This is a strong frame rate for 1080p.
• Ultra settings: The average FPS is 111. This is the most demanding setting at 1080p, but still smooth.

The data shows a clear progression: higher resolutions and settings lead to lower frame rates. The system is most capable at 1080p, where it can exceed 200 FPS on Low settings. At 1440p, it maintains high frame rates on High settings. At 4K, it is best suited for High or Medium settings to maintain a playable frame rate. The measured rows provide a complete picture of the system's performance across all tested configurations, allowing for informed decisions on settings and resolution.