Lockdown Protocol

The AMD Ryzen 9 5950X paired with the NVIDIA GeForce GTX 1050 Ti ranks 1611th out of 1637 tested combinations in Lockdown Protocol. This places the combo in the bottom 2% of all configurations, reflecting a pairing where the graphics card is the dominant constraint. The ranking is not a measure of the CPU's capability, which sits in the 93rd percentile against all processors, but rather of the total system's output in a GPU-bound title. The data shows that this is a low-end configuration for this game, producing playable frame rates only at the lowest settings and resolutions.

How This Combo Ranks

The combination of the Ryzen 9 5950X and the GTX 1050 Ti achieves a rank of 1611 out of 1637 combos in Lockdown Protocol. This is a near-bottom placement, with only 26 configurations performing worse. The GPU's position in the 30th percentile against all graphics cards and its average benchmark score of 5316, which is nearly on par with the GeForce 930A (5317, 0% delta) and the GeForce 940M (5297, 0.4% delta), explains this low ranking. The CPU, by contrast, is a high-end part; its average benchmark score of 49062 is within 0.2% of the Intel Core i5-14600K (49166) and 0.7% above the Intel Xeon Gold 5318H (48698).

The disparity between the CPU's high percentile and the combo's low rank indicates that the system's performance ceiling is determined almost entirely by the GPU. In practical terms, the benchmark results show that this combo is not competitive with most other tested systems, regardless of the CPU's theoretical horsepower. The rank is a system-level metric, and the data shows the GTX 1050 Ti is the limiting factor, dragging the overall position down to the bottom tier.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is a Pascal-architecture part with 4 GB of GDDR5 memory on a 128-bit bus, providing a bandwidth of 112.1 GB/s. Its base clock is 1291 MHz with a boost clock of 1392 MHz. The GPU's shading units number 768, with 48 texture mapping units and 32 render output units. The data shows a peak pixel rate of 44.54 GPixel/s and a texture rate of 66.82 GTexel/s, with FP32 performance at 2.138 TFLOPS.

In Lockdown Protocol, these specifications translate into severe limitations. At 1080p High settings, the average frame rate is 37.8 FPS, but this drops to 29.8 FPS at Ultra. The 4 GB VRAM capacity is a likely bottleneck at higher resolutions and settings, as the game's demands exceed what the card can efficiently deliver. The GPU's average benchmark score of 5316 places it just 0.4% above the GeForce 940M (5297), indicating it is at the entry level of discrete graphics. The measured FPS data confirms that the GTX 1050 Ti is the primary constraint, as even a modest increase in settings or resolution results in disproportionate frame rate losses.

Resolution Scaling

The measured FPS data shows a clear pattern of performance degradation as resolution increases from 1920x1080 to 3840x2160. At Low settings, the average frame rate drops from 61.9 FPS at 1080p to 47 FPS at 1440p, and then to 30.5 FPS at 4K. This represents a 50.7% reduction from 1080p to 4K. At High settings, the drop is from 37.8 FPS at 1080p to 27.8 FPS at 1440p, and further to 19 FPS at 4K, a 49.7% decrease.

The scaling pattern indicates that the system is heavily GPU-bound across all tested resolutions. When the resolution increases, the pixel count rises, and the GTX 1050 Ti's limited fill rate and memory bandwidth (112.1 GB/s) become more pronounced. For instance, the difference between 1080p and 1440p Low is a 15 FPS drop, while the jump from 1440p to 4K Low results in a 16.5 FPS drop. This consistent reduction suggests that the GPU is operating at its maximum capacity even at 1080p, and the extra pixels at higher resolutions directly translate into lower frame rates. The CPU's performance is not a limiting factor in this scaling, as its high thread count and clock speeds would not cause such uniform drops.

FAQ

Q: What is the best average frame rate this combo can achieve in Lockdown Protocol?

A: The highest measured average frame rate is 61.9 FPS at 1920x1080 with Low settings.

Q: How does the combo's rank compare to its individual component percentiles?

A: The combo ranks 1611th out of 1637, while the CPU is in the 93rd percentile and the GPU is in the 30th percentile, showing the GPU's low standing dominates the system ranking.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, Low settings yield an average of 47 FPS, while Ultra yields 20.7 FPS, a difference of 26.3 FPS.

Q: Is the CPU or GPU the limiting factor in this configuration?

A: The data shows the GPU is the limiting factor, as the CPU's benchmark scores are near top-tier rivals, while the GPU scores are near the bottom, and FPS drops consistently with resolution increases.

Q: What is the GTX 1050 Ti's average benchmark score compared to its closest rival?

A: The GTX 1050 Ti has an average benchmark score of 5316, which is 0% different from the NVIDIA GeForce 930A's score of 5317.

Q: What is the frame rate at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the average frame rate is 12.6 FPS.

Settings Recommendations

Based on the measured data, the only settings that provide a consistently playable experience are at 1920x1080 with Low settings, where the average frame rate is 61.9 FPS. This is the only configuration that exceeds 60 FPS. At 1080p Medium, the average drops to 42.6 FPS, which may be acceptable for some users but is below the smooth threshold. At 1440p Low, the average is 47 FPS, which is playable but not ideal for a competitive FPS.

For users prioritizing frame rate, 1080p Low is the clear choice. If a higher resolution is necessary, 1440p Low offers a 47 FPS average, which is more playable than any High or Ultra preset at that resolution. The Ultra preset is not recommended at any resolution; the highest average it achieves is 29.8 FPS at 1080p, and it falls to 12.6 FPS at 4K. The High preset at 1080p (37.8 FPS) is a middle ground but sacrifices smoothness. The data indicates that the GTX 1050 Ti's 4 GB VRAM and 112.1 GB/s bandwidth are insufficient for higher settings, so Low is the optimal preset for this GPU.

CPU Role

The AMD Ryzen 9 5950X is a 16-core, 32-thread processor based on the Zen 3 architecture, with a base clock of 3.40 GHz and a boost clock of 4.90 GHz. It has 64 MB of L3 cache and supports DDR4 memory with a dual-channel bus. Its benchmark scores are strong, with a Cinebench R23 multicore score of 38607 and a single-core score of 5450. The CPU sits in the 93rd percentile of all processors, and its average benchmark score of 49062 is only 0.2% lower than the Intel Core i5-14600K (49166).

In Lockdown Protocol, however, the CPU's role is secondary. The measured FPS data shows that the system is GPU-bound, as frame rates drop proportionally with resolution increases, which would not happen if the CPU were the bottleneck. The CPU's high thread count and clock speeds are irrelevant when the GPU cannot keep up. The data shows that even at 1080p Low, where the CPU could theoretically push more frames, the average is only 61.9 FPS, limited by the GTX 1050 Ti's 2.138 TFLOPS of FP32 performance. The Ryzen 9 5950X provides ample headroom, but this configuration's performance is defined by the GPU's constraints, not the CPU's capabilities.