Lockdown Protocol

Lockdown Protocol responds to resolution changes in a way that clearly maps to a GPU-bound title, but with a CPU that has plenty of headroom. At 1080p High, the AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 5070 combo delivers 172 FPS. Dropping to 1440p High reduces that to 126 FPS, a 27% decline, and 4K High further drops it to 82 FPS, which is 52% below the 1080p result. This scaling pattern is typical for a game where the graphics card is the primary limiter at higher resolutions, though the 7500X3D’s large L3 cache helps keep the 1080p numbers high.

The gap between Low and Ultra settings at each resolution shows how much of the performance headroom is tied to graphical fidelity rather than CPU logic. At 1080p, Low yields 275 FPS while Ultra drops to 129 FPS, a 146 FPS swing. At 1440p, the spread is 204 FPS (Low) to 95 FPS (Ultra), and at 4K it narrows to 132 FPS (Low) versus 61 FPS (Ultra). The shrinking delta as resolution increases indicates that pixel fill rate and shading load become dominant, while the CPU’s ability to feed frames becomes less relevant. For a competitive FPS, this means the 7500X3D is not a bottleneck at any tested setting—even at 1080p Low, the 275 FPS figure is far above what most displays can show.

The 4K Medium result of 93 FPS with a minimum of 79 FPS shows that the combo can maintain playable frame rates at high resolution if you dial back from Ultra. The 4K Ultra average of 61 FPS is just at the edge of smoothness for many players, while the 4K High average of 82 FPS offers a better balance. The data suggests that Lockdown Protocol’s engine scales predictably with both resolution and settings, and the limiting component shifts from the CPU at low resolutions to the GPU at 4K, with the RTX 5070’s 12 GB of GDDR7 memory being sufficient for the tested presets.

FAQ

Q: Is the AMD Ryzen 5 7500X3D holding back the RTX 5070 in Lockdown Protocol?

A: No. The data shows the combo reaches 275 FPS at 1080p Low and 172 FPS at 1080p High, which indicates the CPU can feed the GPU far more frames than most users need. The 7500X3D’s 96 MB shared L3 cache and 6 cores / 12 threads are adequate for this title’s demands, as the frame rate scales down with resolution in a pattern consistent with GPU limitation.

Q: What is the best resolution for a high-refresh-rate monitor?

A: For 144Hz or 165Hz displays, 1440p is the sweet spot. At 1440p Medium, the combo averages 145 FPS with a minimum of 123 FPS, which stays above typical refresh rates. 1440p High at 126 FPS is also viable, but 1440p Ultra (95 FPS) might dip below the refresh rate of some high-end monitors during intense scenes.

Q: How does the 4K experience compare to 1440p?

A: The drop from 1440p to 4K is significant. At High settings, the average falls from 126 FPS to 82 FPS, a 35% reduction. At Ultra, it drops from 95 FPS to 61 FPS, which is a 36% reduction. The 4K Medium setting (93 FPS) is the only 4K preset that approaches 1440p High performance, but it still falls short of the 1440p High average.

Q: Does the RTX 5070’s 12 GB VRAM cause issues at 4K?

A: The measured results do not indicate VRAM limitations. The 4K Ultra preset averages 61 FPS, and the 4K High preset averages 82 FPS, both without reported min FPS anomalies that would suggest texture swapping. The 192-bit memory bus and 672.0 GB/s bandwidth appear sufficient for the tested presets, though the data does not cover beyond Ultra settings.

Q: Which settings preset provides the highest minimum FPS?

A: The Medium preset at each resolution includes min FPS data. At 1080p, the min is 168 FPS; at 1440p, it is 123 FPS; and at 4K, it is 79 FPS. These are the only min FPS values in the dataset, so Medium is the only preset where frame pacing is measured, but the averages suggest High would also be stable.

Q: How does this combo rank among all tested systems for Lockdown Protocol?

A: The combo ranks 527th out of 2828 tested combinations. This places it in the top 19% of all systems, which is strong but not elite. The ranking reflects that while the RTX 5070 is a capable card, there are many faster GPUs and CPUs in the database that achieve higher frame rates.

GPU Role

The NVIDIA GeForce RTX 5070 is the dominant factor in Lockdown Protocol’s performance at higher resolutions. The card’s 12 GB of GDDR7 memory, 192-bit bus, and 672.0 GB/s bandwidth are directly reflected in the scaling pattern. At 1080p, the GPU is not fully utilized, as evidenced by the 275 FPS Low result, which suggests the CPU is nearing its limit but still delivering headroom. As resolution rises to 1440p and 4K, the GPU’s shading units (6144), TMUs (192), and ROPs (80) become the bottleneck, which is why the frame rate drops proportionally with pixel count.

The clock speeds—2325 MHz base and 2512 MHz boost—are moderate for the 50-series, but the Blackwell 2.0 architecture compensates with efficiency. The pixel rate of 201.0 GPixel/s and texture rate of 482.3 GTexel/s are the specs that matter for Lockdown Protocol’s rendering, and the data shows the card handles 4K Medium (93 FPS) without breaking a sweat. The 30.87 TFLOPS FP32 performance is sufficient for the game’s effects, but the real story is the memory subsystem: 672.0 GB/s is enough to feed the GPU at 4K without stuttering, as shown by the min FPS of 79 at 4K Medium.

The RTX 5070’s 82nd percentile ranking among all GPUs, with an average benchmark score of 40377, places it in the upper tier. Its nearest rivals—the AMD Radeon Pro 580 (0.1% slower), Radeon Pro WX 7100 (0.8% slower), and Radeon Pro 5300 (1.2% faster)—are workstation cards, not gaming GPUs, which means the RTX 5070 has no direct gaming competitor in its immediate benchmark vicinity. In Lockdown Protocol, the GPU’s role is clear: it is the limiter at 1440p and 4K, and its 12 GB VRAM is not a constraint at any tested preset.

Measured FPS Breakdown

1080p (1920x1080):

• Low: 275 FPS average. This is the highest result in the entire dataset, indicating the CPU and GPU are both capable of extreme frame rates when graphical load is minimal.
• Medium: 197 FPS average, with a minimum of 168 FPS and maximum of 227 FPS. The min FPS is notably high, suggesting stable frame pacing.
• High: 172 FPS average. A 13% drop from Medium, which is modest and still far above refresh rate needs.
• Ultra: 129 FPS average. This is the lowest 1080p result but still smooth for most displays.

1440p (2560x1440):

• Low: 204 FPS average. A 26% reduction from 1080p Low, showing the GPU’s pixel load increases.
• Medium: 145 FPS average, with a minimum of 123 FPS and maximum of 166 FPS. The min is still high enough for 120Hz displays.
• High: 126 FPS average. This is the most balanced preset for 1440p, offering high fidelity with a comfortable margin above 60 FPS.
• Ultra: 95 FPS average. A 25% drop from High, which is significant and pushes the experience closer to 60 FPS territory.

4K (3840x2160):

• Low: 132 FPS average. This is surprising—it shows that even at 4K, the combo can hit high refresh rates if settings are minimized.
• Medium: 93 FPS average, with a minimum of 79 FPS and maximum of 107 FPS. The min is the lowest in the dataset, but still playable.
• High: 82 FPS average. A 12% drop from Medium, which is the smallest relative decline among the 4K settings, indicating diminishing returns from Medium to High.
• Ultra: 61 FPS average. This is the only preset that dips below 60 FPS in the average, but it remains technically playable.

The data shows a consistent pattern: Low settings at any resolution outperform Ultra at the next lower resolution. For example, 4K Low (132 FPS) beats 1440p Ultra (95 FPS), and 1440p Low (204 FPS) beats 1080p Ultra (129 FPS). This suggests the GPU’s raw rasterization power is more impactful than resolution scaling, making the RTX 5070 a flexible card for users who prioritize frame rate over resolution.

How This Combo Ranks

Out of 2828 tested combos for Lockdown Protocol, this system ranks 527th. That places it in the top 18.6% of all configurations, which is a solid result for a mid-range CPU paired with a high-end GPU. The rank is likely held back by the CPU’s position relative to the GPU—the 7500X3D’s 89th percentile among CPUs (with an average benchmark score of 44573) is slightly lower than the RTX 5070’s 82nd percentile among GPUs, but the gap is small.

The CPU’s nearest rivals in synthetic benchmarks are the Intel Core Ultra X9 388H (0.2% faster), Intel Core i9-13950HX (0.5% faster), and AMD Ryzen AI Max 385 (0.6% faster), as well as the Intel Core i5-14600 (0.7% slower). These are all high-end laptop or desktop chips, and the 7500X3D’s 3D V-Cache (96 MB L3) gives it an edge in gaming workloads, which is why Lockdown Protocol’s frame rates are so high at 1080p.

The GPU’s nearest rivals are workstation cards (Radeon Pro 580, Radeon Pro WX 7100, Radeon Pro 5300, RTX A500 Mobile), which are not designed for gaming. This means the RTX 5070’s 527th rank is likely influenced by the fact that many combos in the database use faster gaming GPUs like the RTX 5090 or RX 7900 XTX, which are not in the nearest rival list. The combo’s rank of 527 out of 2828 indicates that it outperforms the vast majority of systems, but users seeking the absolute top 1% would need a more powerful GPU.

Settings Recommendations

Based on the measured FPS, the best experience depends on your display’s refresh rate and resolution. For 1080p, High settings (172 FPS) is the recommended preset—it offers a 25% improvement over Ultra (129 FPS) while maintaining visual quality that is nearly indistinguishable in fast-paced gameplay. Medium (197 FPS) is an option for competitive players who want extra headroom, but High is the sweet spot for most.

For 1440p, High (126 FPS) is the clear winner. It stays above 120 FPS, which is ideal for 144Hz monitors, and the visual quality is high. Ultra (95 FPS) is not worth the 25% frame rate drop unless you have a 100Hz display and prioritize eye candy. Medium (145 FPS) is excellent for 165Hz screens, but High offers a better balance of fidelity and performance. Avoid Low (204 FPS) unless you are in a tournament setting where every frame matters.

For 4K, the choice is more nuanced. Medium (93 FPS) is the best overall preset—it provides a smooth experience on 90Hz displays and the min FPS of 79 ensures no major stutters. High (82 FPS) is viable for 75Hz or 80Hz screens, but the 12% drop from Medium is not offset by a significant visual upgrade. Ultra (61 FPS) should be avoided unless you have a 60Hz display and want maximum fidelity, as the average is right at the edge of playability. Low (132 FPS) is a niche choice for competitive 4K play, but the visual sacrifice is too steep for most.

In summary, the RTX 5070 + 7500X3D combo is best utilized at 1440p High or 4K Medium, depending on your priority. The CPU’s cache ensures that even at 1080p, the system is not the bottleneck, and the GPU’s 12 GB VRAM is sufficient for all tested presets without compromise.