Lockdown Protocol

# Lockdown Protocol with AMD Ryzen 5 7500X3D + NVIDIA GeForce RTX 3080 Ti

The AMD Ryzen 5 7500X3D paired with the NVIDIA GeForce RTX 3080 Ti produces a distinctive performance profile in Lockdown Protocol, a 2024 FPS title. The combo ranks 670th out of 2,828 tested configurations, placing it in the top quarter of all systems. The data reveals a system that scales predictably with resolution, showing clear GPU-bound behavior at 4K while maintaining exceptional headroom at 1080p. The RTX 3080 Ti, with its 12 GB of GDDR6X memory and 912.4 GB/s bandwidth, demonstrates that memory capacity is not a limiting factor at any tested setting. Meanwhile, the Ryzen 5 7500X3D's 96 MB of shared L3 cache and 6-core/12-thread configuration keep the CPU out of the critical path even at low settings where frame rates exceed 250 FPS.

Resolution Scaling

The measured FPS data shows a clear and consistent pattern of performance degradation as resolution increases, though the magnitude varies significantly by settings preset. At Low settings, the system delivers 259 FPS at 1920x1080, which drops to 190 FPS at 2560x1440 — a 27% reduction — and further to 122 FPS at 3840x2160, representing a 53% decline from the 1080p baseline. This scaling pattern indicates that even at Low settings, the GPU is becoming increasingly stressed as pixel count rises, though the CPU remains capable of feeding frames at all resolutions.

At High settings, the scaling is steeper in percentage terms: 161 FPS at 1080p drops to 118 FPS at 1440p (27% reduction) and then to 76 FPS at 4K (53% reduction from 1080p). The consistency of these percentage drops across Low and High settings suggests that resolution scaling is dominated by the GPU's fill rate and shading capabilities rather than by settings-induced changes in workload composition. The RTX 3080 Ti's 186.5 GPixel/s pixel rate and 532.8 GTexel/s texture rate provide the raw throughput, but the data shows that 4K Ultra — at 57 FPS — represents the point where the GPU's capabilities are fully saturated.

Medium settings offer the most complete picture, with min/max FPS data available at every resolution. At 1080p Medium, the system averages 184 FPS with a 156-211 FPS range. Moving to 1440p Medium drops the average to 135 FPS (27% reduction) with a 115-155 FPS range. At 4K Medium, the average falls to 87 FPS (53% reduction from 1080p) with a 74-100 FPS range. The consistent ~27% and ~53% reductions across all settings suggest that Lockdown Protocol's rendering pipeline scales nearly linearly with pixel count, a hallmark of GPU-bound performance where the CPU's contribution remains constant.

The Ultra preset tells a similar story: 120 FPS at 1080p, 88 FPS at 1440p (27% reduction), and 57 FPS at 4K (53% reduction). The fact that every preset shows nearly identical percentage scaling strongly implies that the limiting component at higher resolutions is the GPU's execution resources — the 10,240 shading units and 112 ROPs — rather than memory bandwidth or CPU throughput. The 912.4 GB/s memory bandwidth appears sufficient even at 4K Ultra, as the frame rate drop follows pixel count rather than memory pressure.

GPU Role

The RTX 3080 Ti's specifications provide context for the measured results, particularly its 12 GB of GDDR6X memory on a 384-bit bus. With 912.4 GB/s of bandwidth, the memory subsystem delivers data at rates that keep the 10,240 shading units fed even at 4K resolution. The observed frame rates — 76 FPS at 4K High and 57 FPS at 4K Ultra — indicate that the GPU is working near its limits at these settings, but the min FPS values (74 at 4K Medium) suggest frame pacing remains stable rather than collapsing under memory pressure.

The GPU's clock behavior, with a base of 1365 MHz and boost of 1665 MHz, contributes to the performance scaling pattern. The 34.10 TFLOPS of FP32 compute and 34.10 TFLOPS of FP16 (1:1 ratio) provide the arithmetic throughput needed for Lockdown Protocol's rendering effects. The 80 RT cores and 320 tensor cores are present but their specific impact on this title is not directly measurable from the FPS data alone. What the numbers do show is that at 1080p, the GPU is not the limiting factor — the 259 FPS at Low settings represents a scenario where the CPU's frame generation capability is the ceiling.

The VRAM capacity question is answered by the data: 12 GB proves sufficient across all tested configurations. The fact that 4K Ultra still delivers 57 FPS without a catastrophic drop in min FPS (where available) indicates that texture and geometry data fits within the 12 GB frame buffer. The GPU's 83rd percentile ranking among all GPUs, with an average benchmark score of 41,187, places it competitively — its nearest rival is the AMD Radeon Pro 5300 with a 0.8% higher score, while the NVIDIA GeForce RTX 5070 trails by 2%. This positioning explains why the combo ranks as high as 670th overall, as the GPU carries most of the workload in this title.

FAQ

Q: Is the RTX 3080 Ti's 12 GB VRAM sufficient for Lockdown Protocol at 4K?

A: Yes. The measured data shows playable frame rates at 4K across all settings, from 122 FPS at Low to 57 FPS at Ultra. The 912.4 GB/s memory bandwidth and 12 GB capacity handle the game's demands without evidence of memory-related stuttering, as the Medium preset shows a 74 FPS minimum at 4K.

Q: How does the Ryzen 5 7500X3D compare to its nearest CPU rivals in synthetic benchmarks?

A: The 7500X3D scores 44,573 in average benchmark performance, placing it 0.2% ahead of the Intel Core Ultra X9 388H (44,466) and 0.5% ahead of the Intel Core i9-13950HX (44,342). It trails the Intel Core i5-14600 by 0.7% (44,889), making these four processors effectively equivalent in overall compute performance.

Q: What frame rate can I expect at 1440p with High settings?

A: The measured average is 118 FPS at 2560x1440 with High settings. This represents a 27% drop from the 1080p High result of 161 FPS, showing that the GPU handles 1440p comfortably while the CPU continues to provide sufficient frame pacing.

Q: Does the CPU bottleneck the GPU at 1080p?

A: The data suggests yes at Low settings, where the system reaches 259 FPS. Given that the 7500X3D's PassMark single-thread score is 3,494 and multi-thread score is 25,047, the CPU's per-core performance becomes the limiting factor at these very high frame rates, as the GPU has ample headroom.

Q: How does this combo rank among all tested systems in Lockdown Protocol?

A: The combination ranks 670th out of 2,828 tested configurations, placing it in the 76th percentile. This indicates that the system outperforms roughly three-quarters of all tested combos while being exceeded by 669 configurations that likely feature more recent GPUs or higher-tier processors.

Q: What is the difference between Low and Ultra settings at 4K?

A: The gap is substantial: 122 FPS at Low versus 57 FPS at Ultra, a 65 FPS difference representing a 114% improvement from Ultra to Low. This suggests that Ultra settings impose significant rendering costs — likely from shadows, reflections, and post-processing — that roughly halve performance at 4K.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest performance across all presets. Low settings produce an average of 259 FPS, Medium settings average 184 FPS with a 156-211 FPS range, High settings average 161 FPS, and Ultra settings average 120 FPS. The progression from Low to Ultra at 1080p shows a 139 FPS spread, with each settings tier costing approximately 20-25% performance relative to the previous tier. The Medium preset's min FPS of 156 indicates that even during demanding scenes, the system maintains frame rates well above 144 Hz display refresh rates.

At 2560x1440, the performance landscape shifts downward but remains strong. Low settings average 190 FPS, Medium settings average 135 FPS with a 115-155 FPS range, High settings average 118 FPS, and Ultra settings average 88 FPS. The 1440p results show a 102 FPS spread between Low and Ultra, with the Medium preset's min FPS of 115 ensuring smooth gameplay on 120 Hz displays. The percentage drops from 1080p are consistent at 27% for every preset, confirming resolution-dependent scaling.

At 3840x2160, the system reaches its limits. Low settings average 122 FPS, Medium settings average 87 FPS with a 74-100 FPS range, High settings average 76 FPS, and Ultra settings average 57 FPS. The 4K results show a 65 FPS spread between Low and Ultra, with the Ultra preset dipping below 60 FPS — the threshold many consider the minimum for comfortable FPS play. The Medium preset's min FPS of 74 indicates that even at 4K, the system avoids severe frame drops, though the 100 FPS maximum shows the ceiling for this configuration at this resolution.

The complete dataset reveals that the Medium preset consistently provides the most balanced experience, with min FPS values that stay within 85% of the average across all resolutions. High settings offer a middle ground, while Low settings maximize frame rates at the cost of visual fidelity. Ultra settings, while playable at 1080p and 1440p, push the system to its limits at 4K.

How This Combo Ranks

The combo's rank of 670 out of 2,828 tested configurations places it in the top 23.7% of all systems tested in Lockdown Protocol. This ranking reflects the combined capabilities of the RTX 3080 Ti, which sits at the 83rd percentile of all GPUs with an average benchmark score of 41,187, and the Ryzen 5 7500X3D, which sits at the 89th percentile of all CPUs with an average score of 44,573.

The GPU's nearest rivals in benchmark scores provide context for its performance tier: the AMD Radeon Pro 5300 scores 40,870 (0.8% higher), the NVIDIA Tesla M40 24 GB scores 41,707 (1.2% lower), and the NVIDIA GeForce RTX 5070 scores 40,377 (2% lower). This grouping suggests the RTX 3080 Ti performs near the level of more recent mid-range offerings, despite being from the previous generation. The CPU's rivals — the Intel Core Ultra X9 388H (44,466, 0.2% higher), Intel Core i9-13950HX (44,342, 0.5% higher), and AMD Ryzen AI Max 385 (44,309, 0.6% higher) — indicate that the 7500X3D is competitive with top-tier mobile and desktop processors from the same era.

The ranking of 670th implies that 669 configurations deliver higher average frame rates in Lockdown Protocol. Given the GPU's percentile ranking of 83, it's likely that many of those superior combos feature newer GPUs with higher raw compute or better optimization for this specific title. The CPU's 89th percentile ranking is less likely to be the bottleneck, as the 7500X3D's 96 MB L3 cache and 6-core design provide strong gaming performance. The 2,158 combos ranked below this system (76.3% of all tested) demonstrate that the 7500X3D + RTX 3080 Ti combination is a solidly above-average performer, capable of handling Lockdown Protocol at high settings across most resolutions.

CPU Role

The Ryzen 5 7500X3D's specifications — 6 cores, 12 threads, base clock 4.00 GHz, boost clock 4.50 GHz — define its contribution to Lockdown Protocol's performance. The processor's 96 MB of shared L3 cache is a standout feature, likely beneficial for this FPS title's data-heavy workloads. The CPU's PassMark multi-thread score of 25,047 and single-thread score of 3,494 show balanced performance, with the single-thread capability being particularly relevant for a game that may not fully utilize all 12 threads.

The measured FPS data reveals the CPU's role shifts depending on resolution. At 1080p Low, the system hits 259 FPS — a frame rate that likely approaches the CPU's maximum frame generation capability. The fact that 4K Low still achieves 122 FPS, while 1080p Ultra achieves 120 FPS, suggests that at 1080p Low, the CPU is the limiting factor. This is supported by the CPU's 89th percentile ranking, which indicates strong but not top-tier absolute performance. The 7500X3D's nearest rivals include the Intel Core Ultra X9 388H (0.2% higher) and Intel Core i9-13950HX (0.5% higher), both of which have higher core counts but similar benchmark scores.

The CPU's memory bandwidth of 83.2 GB/s (dual-channel DDR5) and PCIe Gen 5 support (24 lanes) provide the platform infrastructure for the RTX 3080 Ti's PCIe 4.0 x16 interface. The 65W TDP and 5nm process node (TSMC) make this an efficient processor, though the data does not show any thermal throttling impact on frame rates. The L3 cache configuration of 96 MB shared across 6 cores is the most distinctive feature — this large cache likely reduces memory latency in gaming workloads, though its specific impact on Lockdown Protocol cannot be isolated from the FPS data alone. The CPU's PassMark physics score of 2,779 and integer math score of 70,774 indicate strong compute throughput for game logic and physics calculations, which may contribute to the consistent min FPS values observed at Medium settings.

Settings Recommendations

Based on the measured FPS data, the Medium preset offers the optimal balance of visual quality and performance across all resolutions. At 1080p Medium, the system delivers 184 FPS average with a 156 FPS minimum — well above the 144 Hz threshold for high-refresh-rate monitors. At 1440p Medium, the 135 FPS average with a 115 FPS minimum keeps gameplay smooth on 120 Hz displays. Even at 4K Medium, the 87 FPS average with a 74 FPS minimum remains playable, though barely below the 90 FPS target some competitive players prefer.

For players prioritizing maximum frame rates, the Low preset at 1080p delivers 259 FPS, which is ideal for 240 Hz displays. At 1440p Low, the 190 FPS average still supports 165 Hz monitors. The Low preset at 4K (122 FPS) is also viable for players who want high refresh rates at 4K, though visual fidelity suffers significantly.

The High preset provides a middle ground: 161 FPS at 1080p, 118 FPS at 1440p, and 76 FPS at 4K. These numbers suggest High is the best choice for 1440p users with 120 Hz displays who want better visual quality than Medium while maintaining smooth frame rates. The Ultra preset is only recommended for 1080p (120 FPS) or 1440p (88 FPS) gaming, as the 4K Ultra result of 57 FPS dips below the 60 FPS threshold that many players consider the minimum for responsive FPS gameplay.

The data indicates that the Medium preset's min FPS values — 156 at 1080p, 115 at 1440p, and 74 at 4K — provide the most consistent frame pacing of any settings tier. This consistency is crucial in a competitive FPS where frame time spikes can affect aim and reaction. For most players, the Medium preset represents the best experience per the measured rows, offering a balance of visual quality and performance that keeps frame rates above playable thresholds at every resolution.