Lockdown Protocol

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce GTX 1080 Ti delivers a performance profile in Lockdown Protocol that is heavily dictated by resolution and graphics settings. At 1080p, the combination is capable of high frame rates, but the data shows a clear transition where the GPU becomes the primary constraint as resolution increases. This analysis breaks down the measured FPS data to explain the scaling behavior, the role of each component, and how this specific pairing ranks among all tested configurations.

Resolution Scaling

The measured frame rates reveal a predictable but significant drop as resolution scales from 1920x1080 to 3840x2160. At 1080p with Low settings, the combo achieves an average of 182.8 FPS. Moving to 1440p Low drops this to 129.5 FPS, a reduction of approximately 29%. At 4K Low, the average falls further to 87.2 FPS, which is just under half of the 1080p Low result. This scaling pattern indicates that at lower resolutions, the system is likely not fully GPU-bound, allowing the CPU to push higher frame rates.

The gap between quality settings widens considerably at higher resolutions. At 1080p, the spread from Low (182.8 FPS) to Ultra (85.4 FPS) is a factor of roughly 2.1x. At 1440p, the spread from Low (129.5 FPS) to Ultra (62.8 FPS) is also about 2.1x. However, at 4K, the spread from Low (87.2 FPS) to Ultra (37.7 FPS) narrows to a factor of about 2.3x, with the Ultra setting producing the lowest average of the entire dataset. This suggests that at 4K, the GPU’s rendering load becomes so heavy that even the CPU’s strong single-threaded performance cannot compensate.

The data shows that the GTX 1080 Ti is the limiting factor at 4K. The difference between 4K High (56.2 FPS) and 4K Medium (63.6 FPS) is relatively small, indicating that the GPU is saturated. Conversely, at 1080p, the jump from High (109.9 FPS) to Low (182.8 FPS) is massive, implying that the CPU has headroom to feed the GPU more frames when the graphical load is low. The 1080p Medium result of 128.7 FPS sits between these extremes, showing a smooth progression. For players targeting 60 FPS, the 4K High setting is borderline at 56.2 FPS, while 4K Medium safely exceeds it at 63.6 FPS.

FAQ

Q: What is the average frame rate at 1080p with High settings?

A: The average FPS at 1920x1080 with High settings is 109.9. This is a solid result that indicates the combination can handle standard high-refresh-rate monitors, though not the very highest refresh rates.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the average frame rate drops to 37.7 FPS. This is the lowest recorded score in the dataset, and it is below the 60 FPS threshold that many players consider playable for a fast-paced FPS.

Q: Is the CPU or GPU more responsible for performance at 1440p?

A: At 2560x1440, the results show a balanced but GPU-leaning profile. The average FPS ranges from 129.5 (Low) to 62.8 (Ultra). The significant drop between Low and Ultra indicates that the GTX 1080 Ti’s rendering capacity is the main factor, as the CPU can maintain higher frame rates when the GPU load is light.

Q: What is the best setting for a smooth 4K experience?

A: Based on the data, 4K Medium provides an average of 63.6 FPS, which is the only 4K setting in the dataset to exceed 60 FPS. 4K High is slightly below at 56.2 FPS, while 4K Low reaches 87.2 FPS but sacrifices visual quality.

Q: How does the 1080p Low setting compare to 1440p Low?

A: The 1080p Low setting averages 182.8 FPS, while 1440p Low averages 129.5 FPS. This represents a 53.3 FPS drop (or roughly 29%) when increasing resolution, highlighting the resolution’s impact on the GPU.

Q: What is the combo’s ranking among all tested systems?

A: This specific combination of the AMD Ryzen 5 7500F and NVIDIA GeForce GTX 1080 Ti ranks 989th out of 1637 tested combos in Lockdown Protocol. This places it in the lower-middle portion of the performance distribution.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. Its benchmark scores show strong multi-threaded capability, with a Cinebench R23 multi-core score of 22799 and a single-core score of 3218. In the context of Lockdown Protocol, a fast-paced FPS, single-thread performance is often critical for game logic and physics calculations. The CPU’s 3DMark 2-thread score of 1902 and single-thread score of 974 indicate solid responsiveness for such tasks.

The data suggests that the CPU is not the primary bottleneck at higher resolutions. At 4K, the average FPS across settings (37.7 to 87.2) is significantly lower than at 1080p (85.4 to 182.8), which points to the GPU being the limiting factor. However, at 1080p Low, the 182.8 FPS result shows that the CPU can drive a high frame rate when the GPU is not heavily loaded. This indicates that the Ryzen 5 7500F has sufficient headroom to support high-refresh-rate gaming at lower resolutions.

The CPU’s 32 MB of shared L3 cache and dual-channel DDR5 memory support (with a bandwidth of 83.2 GB/s) contribute to its ability to feed data quickly to the GPU. The processor’s 65W TDP is modest, but its performance per watt is strong, as evidenced by its average benchmark score of 24993 and its percentile ranking of 82nd among all CPUs. In this game, the CPU’s role is to maintain a high enough frame ceiling, which it does effectively at 1080p, but it cannot overcome the GPU’s limitations at 4K.

How This Combo Ranks

In the overall ranking for Lockdown Protocol, this combo sits at rank 989 out of 1637 tested combinations. This places it in the 60th percentile of all systems, meaning roughly 40% of tested combos are slower. The average FPS across all measured settings is not provided, but the individual scores show a wide range. The combo’s performance is consistent with its component specifications: the GTX 1080 Ti, while a capable card in its era, is now older hardware. Its percentile ranking among all GPUs is 61st, indicating that it performs better than 61% of all GPUs in the database.

Relative to its nearest rivals, the CPU is very closely matched with several other processors. The Ryzen 5 7500F’s average benchmark score of 24993 is nearly identical to the Intel Core i7-11850H (24974, deltaPct 0.1) and the AMD Ryzen 9 6900HX (24897, deltaPct 0.4). It is also comparable to the AMD Ryzen 7 2700X (25057, deltaPct -0.3) and the AMD Ryzen 5 8400F (25064, deltaPct -0.3). These tiny deltas (all within 0.4%) mean that in CPU-heavy scenarios, this combo would be indistinguishable from those alternatives.

For the GPU, the nearest rival is the NVIDIA GeForce GTX 780, which has an average score of 19405 compared to the 1080 Ti’s 19402, a deltaPct of 0.0. This is an unusual result, as the 1080 Ti is a much newer and more powerful card in practice, but the average benchmark scores are nearly identical. The AMD Radeon Pro 560X (19426, deltaPct -0.1) and NVIDIA Tesla K40m (19519, deltaPct -0.6) are also close. The only rival with a notable positive delta is the NVIDIA TITAN Xp, which scores 19184 (deltaPct 1.1). This clustering suggests that in synthetic benchmarks, the 1080 Ti’s raw compute is not far ahead of these older or workstation-oriented cards.

GPU Role

The NVIDIA GeForce GTX 1080 Ti is a Pascal-architecture GPU with 11 GB of GDDR5X memory on a 352-bit bus, providing a bandwidth of 484.4 GB/s. Its base clock of 1481 MHz and boost clock of 1582 MHz, combined with 3584 shading units, deliver a theoretical FP32 performance of 11.34 TFLOPS. The card’s memory size of 11 GB is substantial for its generation, and its texture rate of 354.4 GTexel/s and pixel rate of 139.2 GPixel/s are key metrics for rasterization-heavy workloads like Lockdown Protocol.

The measured FPS data strongly indicates that the GPU is the primary bottleneck at 4K. The difference between 4K Low (87.2 FPS) and 4K Ultra (37.7 FPS) is a 49.5 FPS drop, which is a direct consequence of the GPU’s fill rate and shading capacity being overwhelmed by higher quality settings. At 1080p, the GPU can often keep up with the CPU’s output, but at 4K, the rendering demands exceed what the 1080 Ti can deliver for smooth 60 FPS gameplay on Ultra.

The GTX 1080 Ti’s 11 GB of VRAM is sufficient for this game at all tested settings, as there is no indication of memory-related stuttering in the data. However, the card’s age is evident in its DirectX 12 benchmark score of 66 in PassMark, which is lower than its DirectX 11 score of 151. This suggests that the Pascal architecture may not be fully optimized for newer API workloads, which could impact performance in a 2024-released FPS like Lockdown Protocol. Despite this, the GPU maintains a 61st percentile ranking among all GPUs, showing that it still holds up against the broader hardware landscape. The data confirms that for this combo, the GPU is the component that limits maximum quality and resolution, while the CPU provides enough headroom to avoid being the primary constraint until frame rates are pushed very high at 1080p.