Lockdown Protocol

The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 3070 combination delivers a versatile 1080p and 1440p experience in Lockdown Protocol, with 4K remaining playable at medium settings. The data indicates a system where the GPU is the primary scaling factor as resolution increases, while the six-core processor provides ample headroom for high frame rates at lower resolutions.

Resolution Scaling

The measured FPS data reveals a clear and predictable pattern of performance degradation as resolution climbs from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 133 FPS at 1080p to 97 FPS at 1440p, a 27% reduction, and then further to 63 FPS at 4K, a 35% drop from the 1440p figure. This scaling curve is characteristic of a GPU-bound scenario where the rendering load on the RTX 3070 increases exponentially with pixel count.

The Low settings preset shows an even steeper relative decline, moving from 214 FPS at 1080p to 157 FPS at 1440p and finally 101 FPS at 4K. The 1080p-to-4K delta for Low settings is a substantial 113 FPS, indicating that when the graphical load is minimal, the GPU still becomes the limiting factor as resolution rises, though the absolute numbers remain high enough for competitive play.

Medium settings provide a middle ground, with frame rates of 152 FPS at 1080p, 111 FPS at 1440p, and 72 FPS at 4K. The scaling from 1080p to 1440p here is a 27% reduction, while the 1440p-to-4K step is a 35% reduction, mirroring the High preset pattern. This consistency suggests that the RTX 3070's memory bandwidth and compute throughput are the dominant constraints at higher resolutions, regardless of the specific quality preset.

Ultra settings produce the lowest frame rates across all resolutions, with 99 FPS at 1080p, 73 FPS at 1440p, and 47 FPS at 4K. The 4K result at Ultra is the only measurement in the entire dataset that falls below the 60 FPS threshold, highlighting the strain that maximum quality settings place on this GPU at 4K resolution. The data clearly indicates that the RTX 3070 is the bottleneck in this configuration at 4K, while at 1080p, the CPU's capability becomes more relevant.

GPU Role

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture with a GA104 chip manufactured on an 8 nm process at Samsung. It features 5888 shading units, 184 texture mapping units, and 96 raster output units, along with 46 ray tracing cores and 184 tensor cores. The GPU operates at a base clock of 1500 MHz and a boost clock of 1725 MHz, with memory running at 1750 MHz (14 Gbps effective) across a 256-bit bus.

The 8 GB of GDDR6 memory delivers a bandwidth of 448.0 GB/s, which is a critical factor in the 4K performance observed. At 3840x2160 Ultra, the average FPS falls to 47, suggesting that the memory capacity and bandwidth are insufficient to maintain fluid frame rates at maximum quality. The 3DMark Steel Nomad DX12 score of 3162 and a Passmark G3D score of 22214 place this GPU at the 61st percentile among all tested GPUs, with an average benchmark score of 17208.

In the measured FPS data, the GPU's role is most evident in the scaling from 1440p to 4K. At High settings, the frame rate drops by 34 FPS, and at Medium settings, it drops by 39 FPS. This consistent degradation indicates that the GPU's compute resources are saturated at 4K, particularly with higher quality presets that increase shader complexity and texture memory usage. The RTX 3070's 20.31 TFLOPS FP32 performance and 165.6 GPixel/s pixel rate are substantial, but the 8 GB VRAM appears to be the limiting factor at 4K Ultra, where the average FPS dips below 50.

The GPU's nearest rival, the AMD Radeon RX 7600 XT, has an average benchmark score of 17083, which is 0.7% lower than the RTX 3070's score. This close performance parity is reflected in the gaming results, where the RTX 3070 demonstrates strong 1080p and 1440p capabilities but struggles to maintain 60 FPS at 4K Ultra.

CPU Role

The AMD Ryzen 5 5600 is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer, built on a 7 nm process at TSMC. It operates at a base clock of 3.50 GHz and a boost clock of 4.40 GHz, with a 65 W TDP. The processor features 64 KB of L1 cache per core, 512 KB of L2 cache per core, and 32 MB of shared L3 cache, providing a total of 4,150 million transistors on a 74 mm² die.

In synthetic benchmarks, the Ryzen 5 5600 achieves a Cinebench R23 multicore score of 18309 and a single-core score of 2584, along with a Geekbench multicore score of 9158 and a single-core score of 1936. The processor's average benchmark score is 20468, placing it at the 74th percentile among all CPUs. Its nearest rival, the Intel Core Ultra 7 258V, has an average score of 20454, a mere 0.1% difference, indicating the Ryzen 5 5600 is very closely matched with that competitor in general processing workloads.

The CPU's role in Lockdown Protocol is most apparent at 1080p with lower quality settings. At 1920x1080 Low, the average FPS reaches 214, which is a high enough frame rate that the CPU's single-thread performance becomes a potential limiting factor. However, the 3DMark single-thread score of 882 and Passmark single-thread score of 3256 indicate that the Ryzen 5 5600 has sufficient per-core performance to drive high frame rates. The 12 threads provide ample multi-threading capability for game logic and physics, as evidenced by the Cinebench R20 multicore score of 7689.

At 4K resolution, the CPU's influence diminishes significantly. The frame rates at 3840x2160 across all settings are consistently lower than their 1080p counterparts, and the gap between Low (101 FPS) and Ultra (47 FPS) at 4K is 54 FPS, compared to a 115 FPS gap at 1080p. This compression of the performance spread at 4K is a classic sign of GPU saturation, where the CPU is no longer the constraining factor)Skip.

Measured FPS Breakdown

The dataset provides average FPS measurements for 12 distinct combinations of resolution and quality settings, with minimum and maximum FPS recorded only for the Medium preset at each resolution.

At 1920x1080, the Low preset delivers an average of 214 FPS, the highest result in the entire dataset. Medium settings produce 152 FPS average, with minimum and maximum values of 129 and 175 FPS, respectively. High settings yield 133 FPS average, while Ultra settings drop to 99 FPS average. The spread from Low to Ultra at 1080p is 115 FPS, demonstrating the significant impact of quality settings at this resolution.

Moving to 2560x1440, the Low preset averages 157 FPS, a 27% reduction from the 1080p Low result. Medium settings average 111 FPS, with a minimum of 95 and maximum of 128 FPS. High settings produce 97 FPS average, and Ultra settings drop to 73 FPS average. The 1440p results indicate that the RTX 3070 remains capable of high refresh rate gaming at this resolution, with even Ultra settings exceeding 70 FPS.

At 3840x2160, the Low preset averages 101 FPS, which is still a respectable result for 4K gaming. Medium settings average 72 FPS, with a minimum of 61 and maximum of 83 FPS, suggesting that the playable threshold is around this preset. High settings average 63 FPS, which is just above the 60 FPS standard for smooth gameplay. Ultra settings average 47 FPS, falling below the 60 FPS threshold and indicating that this setting is not suitable for 4K on this hardware combination.

The Medium preset is the only one with min/max FPS data across all resolutions. At 1080p, the range is 129-175 FPS, a 46 FPS spread; at 1440p, the range is 95-128 FPS, a 33 FPS spread; and at 4K, the range is 61-83 FPS, a 22 FPS spread. The narrowing range at higher resolutions further supports the conclusion that the GPU becomes the bottleneck, reducing frame time variance as the rendering load becomes more uniform.

How This Combo Ranks

The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 3070 combination ranks 1588th out of 3714 tested combos in Lockdown Protocol, placing it in the 57th percentile of all combinations in the database. This mid-pack ranking reflects the hardware's balanced but not top-tier performance in this specific game.

The ranking is influenced by the GPU's 61st percentile position among all GPUs and the CPU's 74th percentile among all CPUs. The combination's overall rank is lower than either component's individual percentile, which suggests that the pairing does not fully leverage the CPU's relative strength in this game's workload. The GPU's performance ceiling appears to be the primary constraint on the combination's overall ranking, particularly at higher resolutions.

In the context of the GPU's nearest rivals, the RTX 3070's average benchmark score of 17208 is 0.7% higher than the AMD Radeon RX 7600 XT's 17083, and 1% higher than the NVIDIA GeForce GTX 690's 17037. The CPU's nearest rival, the Intel Core Ultra 7 258V, has an average score that is 0.1% lower than the Ryzen 5 5600's 20468. These close margins indicate that the combination's rank could shift with minor driver or game updates, and that the performance envelope is well-defined by the component specifications.

The combo's 4K Ultra result of 47 FPS is a notable weakness that likely contributes to its mid-pack ranking, as many competing combinations with more powerful GPUs would achieve higher scores at this resolution. Conversely, the 1080p Low result of 214 FPS demonstrates the combination's capability for high-refresh-rate esports-style gaming, which is a positive factor in its overall assessment.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Lockdown Protocol?

A: The data shows that 2560x1440 offers the best balance of visual quality and performance, with High settings achieving 97 FPS and Ultra settings achieving 73 FPS. At 1920x1080, all settings exceed 99 FPS, but the visual fidelity is lower. At 3840x2160, only Low (101 FPS) and Medium (72 FPS) settings remain playable.

Q: Why does the 4K Ultra setting only achieve 47 FPS?

A: The 47 FPS result at 3840x2160 Ultra is the lowest in the dataset, indicating that the RTX 3070's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are insufficient for maximum quality at this resolution. The GPU's compute resources, including its 20.31 TFLOPS FP32 performance, become saturated under the combined load of high resolution and maximum settings.

Q: How does the Ryzen 5 5600 compare to its nearest CPU rival in synthetic benchmarks?

A: The Ryzen 5 5600 has an average benchmark score of 20468, which is 0.1% higher than the Intel Core Ultra 7 258V's score of 20454. This places the AMD processor at the 74th percentile among all CPUs, with the Intel rival being the closest competitor in terms of overall processing capability.

Q: Does the CPU or GPU limit performance at 1080p Low settings?

A: At 1920x1080 Low, the average FPS is 214, which is the highest result in the dataset. The Ryzen 5 5600's single-thread score of 882 in 3DMark and 3256 in Passmark suggests it has enough per-core performance to drive such high frame rates, but the 214 FPS result may approach the CPU's practical limit in this game.

Q: What is the FPS range for Medium settings across resolutions?

A: The Medium preset has recorded min/max FPS data at all three resolutions. At 1080p, the range is 129 to 175 FPS; at 1440p, it is 95 to 128 FPS; and at 4K, it is 61 to 83 FPS. The narrowing range at higher resolutions indicates reduced frame time variance as the GPU becomes more consistently the limiting factor.

Q: How does the RTX 3070's benchmark score compare to its closest GPU rival?

A: The RTX 3070 has an average benchmark score of 17208, which is 0.7% higher than the AMD Radeon RX 7600 XT's score of 17083. The RTX 3070 also ranks at the 61st percentile among all GPUs, while its Passmark G3D score of 22214 provides a direct measure of its gaming-oriented compute performance.