Lockdown Protocol

The data for Lockdown Protocol with the AMD Ryzen 5 5600 and NVIDIA GeForce GTX 1050 Ti reveals a system heavily constrained by its graphics processor. The benchmark results show a clear pattern where the GPU becomes the dominant limiting factor as resolution increases, with the CPU's substantial multi-threading capabilities remaining largely underutilized in this FPS title.

Resolution Scaling

The measured FPS data shows a dramatic collapse in performance as resolution scales from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 37.6 FPS at 1080p to 26.4 FPS at 1440p, then further to 20.8 FPS at 4K. This represents a 45% reduction from 1080p to 4K, indicating that pixel throughput is the primary bottleneck. The pattern intensifies at Ultra settings, where the average falls from 30.5 FPS at 1080p to 19.7 FPS at 1440p and finally to 13.8 FPS at 4K — a performance loss of 55% across the resolution range.

The scaling behavior suggests the GTX 1050 Ti's 4 GB of GDDR5 memory and 112.1 GB/s bandwidth are simply overwhelmed at higher resolutions. Interestingly, the Low preset shows the most resilient scaling, going from 60 FPS at 1080p to 44.7 FPS at 1440p and 27 FPS at 4K. This indicates that when the rendering load is reduced, the GPU can still maintain playable frame rates at lower resolutions, but the gap between Low and Ultra widens considerably as resolution increases — the difference between presets at 1080p is only 29.5 FPS, but at 4K it expands to 13.2 FPS.

How This Combo Ranks

This specific combination of components ranks 1635 out of 1637 tested combos in Lockdown Protocol, placing it in the bottom 0.1% of all configurations. This is a remarkably poor standing that reflects the GPU's age and limited capabilities rather than any deficiency in the CPU. The Ryzen 5 5600 alone scores in the 79th percentile against all CPUs, with an average benchmark score of 21765, while the GTX 1050 Ti languishes in the 30th percentile for GPUs with an average score of 5316.

The disparity between component tiers is stark. The CPU's nearest rivals — the Intel Xeon D-1746TER, AMD EPYC 9554P, AMD EPYC 9534, and Intel Core i7-11700F — all have average scores within 0.9% of the Ryzen 5 5600, showing this processor is competitive with much more expensive server and desktop parts. Conversely, the GPU's nearest rivals are all mobile or entry-level desktop parts like the NVIDIA GeForce 930A, GeForce 940M, AMD Radeon R7 240, and Radeon R7 M445, with delta percentages of 0.7% or less. This combination pairs a top-tier CPU with a bottom-tier GPU, and the game's performance ranking reflects that mismatch.

CPU Role

The AMD Ryzen 5 5600 brings substantial processing power to this pairing. With 6 cores and 12 threads based on the Zen 3 Vermeer architecture, it operates at a base clock of 3.50 GHz and boost clock of 4.40 GHz. The processor's 32 MB of shared L3 cache and 51.2 GB/s dual-channel DDR4 memory bandwidth provide ample headroom for gaming workloads. Benchmark results show strong multi-threaded performance: Cinebench R23 multicore scores 18309, while the single-core test reaches 2584.

However, the measured FPS data suggests the CPU is not the limiting factor in Lockdown Protocol. The consistent frame rates across different settings at the same resolution — for instance, 37.6 FPS at High versus 30.5 FPS at Ultra in 1080p — indicate that the GPU is saturated before the CPU's capabilities are fully exercised. The Ryzen 5 5600's 3DMark scores (5641 for 16 threads, 882 for single-thread) demonstrate it can handle substantial computational loads, but the GTX 1050 Ti's 768 shading units and 2.138 TFLOPS of FP32 performance create a bottleneck that prevents the CPU from ever being the constraint.

Measured FPS Breakdown

At 1920x1080, the system achieves its best results. Low settings produce exactly 60 FPS average, which represents the highest measured value across all configurations. Medium settings yield 42.1 FPS, High settings drop to 37.6 FPS, and Ultra settings bottom out at 30.5 FPS. This resolution is the only one where any preset reaches playable frame rates above 30 FPS, and even then only at Low settings.

Moving to 2560x1440 reveals significant degradation. Low settings average 44.7 FPS, which is still respectable but represents a 25.5% drop from 1080p. Medium settings fall to 29.6 FPS, High to 26.4 FPS, and Ultra to 19.7 FPS. The gap between Low and Ultra at this resolution is 25 FPS, showing how sensitive the GPU is to quality settings when pixel count increases.

At 3840x2160, the system struggles across all presets. Low settings average 27 FPS, High settings 20.8 FPS, Medium settings 20.1 FPS, and Ultra settings 13.8 FPS. Interestingly, the Medium preset performs slightly worse than High at 4K (20.1 versus 20.8 FPS), suggesting measurement variance or specific rendering paths that favor one preset over another at this resolution. The data shows that 4K gaming is effectively out of reach for this combination, with even the lowest quality settings failing to maintain 30 FPS.

FAQ

Q: What is the best resolution for this CPU-GPU combination?

A: The measured data shows 1920x1080 is the only resolution where the system achieves 60 FPS (at Low settings). At 2560x1440, the maximum average is 44.7 FPS, and at 3840x2160, it drops to 27 FPS, so 1080p is clearly the intended operating resolution.

Q: How much performance is lost when moving from 1080p to 4K?

A: At High settings, the average frame rate drops from 37.6 FPS at 1080p to 20.8 FPS at 4K, a 45% reduction. At Ultra settings, the decline is from 30.5 FPS to 13.8 FPS, representing a 55% loss.

Q: Does the Ryzen 5 5600 bottleneck the GTX 1050 Ti in this game?

A: No, the data indicates the opposite. The CPU ranks in the 79th percentile against all CPUs with an average benchmark score of 21765, while the GPU ranks in the 30th percentile. The frame rates are consistently limited by the GPU's rendering capabilities, not the processor.

Q: Which settings preset provides the highest average FPS at 1440p?

A: The Low preset delivers the best result at 2560x1440 with an average of 44.7 FPS. Medium follows at 29.6 FPS, High at 26.4 FPS, and Ultra at 19.7 FPS.

Q: How does this combo compare to other tested configurations?

A: This combination ranks 1635 out of 1637 tested combos in Lockdown Protocol, placing it in the bottom 0.1% of all configurations tested. This is consistent with the GPU's low percentile ranking among all GPUs.

Q: Is the GTX 1050 Ti's 4 GB VRAM sufficient for this game?

A: The GPU has 4 GB of GDDR5 memory with 112.1 GB/s bandwidth. The measured performance at 4K (20.8 FPS at High) suggests the memory capacity and bandwidth are insufficient for high-resolution rendering, though the card performs adequately at 1080p Low settings.

Settings Recommendations

Based on the measured FPS data, the optimal configuration for this system is 1920x1080 resolution with Low settings, which achieves exactly 60 FPS average. This is the only preset and resolution combination that hits the standard 60 FPS target. For players who prioritize visual quality over frame rate, 1080p Medium settings at 42.1 FPS offers a reasonable middle ground, while 1080p High at 37.6 FPS provides additional detail without dropping below 30 FPS.

At 2560x1440, only the Low preset maintains an average above 40 FPS at 44.7 FPS, making it the sole viable option at this resolution. The Medium preset at 29.6 FPS is borderline playable but may feel inconsistent. All 4K presets, ranging from 27 FPS at Low to 13.8 FPS at Ultra, fall below acceptable playability thresholds. Given the data, the best experience is achieved at 1080p with Low settings, sacrificing visual fidelity for smooth gameplay, or at 1080p Medium/High for a balanced approach that keeps frame rates above 30 FPS.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the definitive bottleneck in this configuration. Based on the Pascal architecture with the GP107 chip, this GPU features 768 shading units, 48 texture mapping units, and 32 ROPs. Its clock speeds are modest at 1291 MHz base and 1392 MHz boost, producing a pixel rate of 44.54 GPixel/s and a texture rate of 66.82 GTexel/s. The 4 GB GDDR5 memory on a 128-bit bus delivers 112.1 GB/s bandwidth, which proves inadequate for higher resolutions.

The GPU's benchmark scores reinforce its position as the limiting factor. Its 3DMark Steel Nomad DX12 score is 305, while Passmark G3D scores 6340 and GPU compute scores 2652. These figures place it in the 30th percentile against all GPUs, with nearest rivals being mobile and entry-level desktop parts. The measured FPS data shows the GPU's performance collapses as resolution increases — from 60 FPS at 1080p Low to 27 FPS at 4K Low, and from 30.5 FPS at 1080p Ultra to 13.8 FPS at 4K Ultra. This pattern clearly indicates that the GPU's fill rate, memory bandwidth, and compute capabilities are insufficient for Lockdown Protocol at higher quality settings, making the GTX 1050 Ti the component that must be upgraded to improve performance in this game.