Evolve

The AMD Ryzen 5 5600 and NVIDIA GeForce GTX 1050 Ti pairing represents a significant mismatch in Evolve, landing in the 1693rd position out of 1695 tested combos. The benchmark data shows that this configuration is fundamentally GPU-limited, with the GTX 1050 Ti's modest compute resources creating a bottleneck that even a strong modern processor cannot overcome.

CPU Role

The AMD Ryzen 5 5600 brings a 6-core, 12-thread Zen 3 architecture running at a base clock of 3.50 GHz and a boost clock of 4.40 GHz. This processor sits in the 79th percentile against all CPUs, with an average benchmark score of 21765. Its nearest rival, the Intel Xeon D-1746TER, scores 21635 (0.6% lower), while the AMD EPYC 9554P scores 21899 (0.6% higher), showing the Ryzen 5 5600 is positioned in a tightly contested mid-range performance band.

The CPU's multithreaded capability is evidenced by a Cinebench R23 multicore score of 18309 and a single-core score of 2584. These results place the processor well above the requirements for Evolve, a 2015 FPS title that was designed for the era's 4-core mainstream CPUs. The 32 MB of shared L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth provide ample headroom for game logic and physics calculations.

However, the measured FPS data reveals that the CPU's potential is largely untapped in this configuration. At 1080p Low settings, where GPU load is minimized, the combo achieves 63.8 FPS, but at 1080p Ultra, performance drops to 25 FPS. This pattern indicates that the processor is not the limiting factor; the GPU is. The Ryzen 5 5600's 3dmark single-thread score of 882 and 3dmark 2-thread score of 1737 suggest it can handle Evolve's single-threaded game logic without breaking a sweat, but the GTX 1050 Ti cannot keep pace with the rendering demands.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the clear bottleneck in this pairing. Built on the 14 nm GP107 chip with 768 shading units, 48 TMUs, and 32 ROPs, this GPU operates at a base clock of 1291 MHz and a boost clock of 1392 MHz. Its memory configuration includes 4 GB of GDDR5 on a 128-bit bus, yielding 112.1 GB/s of bandwidth. These specifications place the GPU in the 30th percentile against all GPUs, with an average benchmark score of 5316.

The GTX 1050 Ti's nearest rivals highlight its entry-level positioning. The NVIDIA GeForce 930A scores 5317 (0% difference), while the NVIDIA GeForce 940M scores 5297 (0.4% lower) and the AMD Radeon R7 240 scores 5280 (0.7% lower). The GPU's DirectX 11 benchmark score of 45 and DirectX 12 score of 26 demonstrate its limited capability in modern graphics workloads, though Evolve's 2015 engine is more aligned with DirectX 11-era performance.

The 4 GB VRAM capacity becomes a constraint at higher resolutions and settings. The data shows that at 4K Ultra, the combo manages only 8.4 FPS, suggesting the GPU is overwhelmed by both fill-rate demands and memory bandwidth limitations. The 112.1 GB/s bandwidth is insufficient for 4K texture streaming in Evolve's high-detail environments. The GPU's FP32 performance of 2.138 TFLOPS provides a theoretical ceiling that explains the sub-30 FPS results at 1440p Medium and above.

Resolution Scaling

The resolution scaling data reveals a steep performance cliff that confirms the GPU-limited nature of this combo. From 1080p Low (63.8 FPS) to 4K Low (25.4 FPS), the frame rate drops by 60.2%. This scaling pattern is consistent with a GPU that is running out of fill-rate and memory bandwidth as pixel count increases.

At High settings, the progression from 1080p (35.6 FPS) to 1440p (26.8 FPS) represents a 24.7% drop, while moving from 1440p to 4K (11.7 FPS) represents a 56.3% drop. The non-linear scaling suggests that at 4K, the GTX 1050 Ti is hitting a hard wall where its 32 ROPs and 112.1 GB/s bandwidth simply cannot sustain the pixel throughput. The Ultra settings show the most dramatic degradation: 1080p Ultra at 25 FPS falls to 14.5 FPS at 1440p and 8.4 FPS at 4K, indicating that the GPU's compute resources are saturated even at the lowest resolution tested.

The Medium settings tell a similar story, with 47.3 FPS at 1080p dropping to 30.2 FPS at 1440p and 15.8 FPS at 4K. The fact that 4K Medium (15.8 FPS) is lower than 1080p Ultra (25 FPS) demonstrates that resolution scaling has a more significant impact on performance than quality preset adjustments, further confirming the GPU as the primary constraint.

How This Combo Ranks

The combo rank of 1693 out of 1695 tested combinations places this pairing in the bottom 0.12% of all configurations tested for Evolve. This is a remarkably low ranking that reflects the severe imbalance between the CPU and GPU components. The Ryzen 5 5600 is a capable mid-range processor, but the GTX 1050 Ti is an entry-level GPU from 2016 that was not designed for high-refresh gaming even at its launch.

This ranking suggests that the CPU is vastly overqualified for the GPU's capabilities. The processor's 79th percentile standing among all CPUs contrasts sharply with the GPU's 30th percentile ranking. In Evolve, a game that is not particularly CPU-intensive, this disparity means the Ryzen 5 5600 spends most of its time waiting for the GTX 1050 Ti to complete rendering tasks. The result is a configuration that delivers playable frame rates only at 1080p Low settings, which is far below what the CPU alone could support.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of this combo's performance across resolutions and settings. At 1920x1080, the results range from 25 FPS at Ultra to 63.8 FPS at Low, with Medium achieving 47.3 FPS and High reaching 35.6 FPS. These numbers indicate that 1080p Low is the only fully playable configuration, while 1080p Medium approaches acceptable performance but remains below the 60 FPS threshold.

At 2560x1440, the performance drops significantly. Low settings produce 43.1 FPS, while Medium achieves 30.2 FPS, High reaches 26.8 FPS, and Ultra falls to 14.5 FPS. None of these results meet the 60 FPS standard, and even the Low preset falls short of a smooth 45 FPS experience. The 1440p resolution is effectively unplayable for this combo in Evolve.

At 3840x2160, the results are marginal at best. Low settings yield 25.4 FPS, Medium produces 15.8 FPS, High achieves 11.7 FPS, and Ultra drops to 8.4 FPS. These frame rates are below playable thresholds for a fast-paced FPS title, making 4K gaming impossible with this hardware combination.

FAQ

Q: Is the AMD Ryzen 5 5600 sufficient for Evolve?

A: Yes, the Ryzen 5 5600 with 6 cores and 12 threads at a 4.40 GHz boost clock is more than adequate for Evolve. Its Cinebench R23 multicore score of 18309 and single-core score of 2584 far exceed what a 2015 FPS title requires. The processor is not the limiting factor in this configuration.

Q: Can the GTX 1050 Ti handle Evolve at 1080p?

A: Only at Low settings, where the combo achieves 63.8 FPS. At Medium settings, the frame rate drops to 47.3 FPS, and at High it falls to 35.6 FPS. The Ultra preset produces just 25 FPS, which is below playable standards for an FPS game.

Q: Why is the 4K performance so poor?

A: The GTX 1050 Ti's 4 GB of GDDR5 memory on a 128-bit bus provides only 112.1 GB/s of bandwidth. This is insufficient for 4K rendering, as evidenced by the 4K Low result of 25.4 FPS and the 4K Ultra result of 8.4 FPS. The GPU's 32 ROPs cannot sustain pixel throughput at this resolution.

Q: How does this combo rank against other tested configurations?

A: This combo ranks 1693rd out of 1695 tested combinations for Evolve. This places it in the bottom 0.12% of all configurations, reflecting the severe GPU bottleneck created by pairing a modern 6-core CPU with an entry-level 2016 GPU.

Q: Is the Ryzen 5 5600's performance consistent with its rivals?

A: The Ryzen 5 5600 scores 21765 on average, which is 0.6% higher than the Intel Xeon D-1746TER (21635) and 0.6% lower than the AMD EPYC 9554P (21899). This places it in a tightly contested performance band among its nearest competitors.

Q: What is the best settings preset for this combo?

A: The 1080p Low preset at 63.8 FPS is the only configuration that approaches a 60 FPS experience. The 1080p Medium preset at 47.3 FPS is playable but not smooth, while all other settings and resolutions fall below acceptable FPS standards.

Settings Recommendations

The measured data provides a clear hierarchy of playable configurations for this combo. The 1080p Low preset at 63.8 FPS is the only setting combination that delivers a frame rate above 60 FPS, making it the recommended choice for competitive play. This preset allows the GTX 1050 Ti to operate within its performance envelope while providing a smooth experience.

For users who prioritize visual quality over frame rate, the 1080p Medium preset at 47.3 FPS offers a reasonable compromise. This setting maintains playable performance while providing improved textures and effects over the Low preset. The 1080p High preset at 35.6 FPS is borderline playable but may cause noticeable stuttering in fast-paced FPS action.

All 1440p and 4K configurations are not recommended for this combo. The 1440p Low preset at 43.1 FPS is the only 1440p option that approaches playability, but it falls short of the smoothness required for an FPS title. The 4K presets, ranging from 8.4 to 25.4 FPS, are completely unplayable and should be avoided entirely.

Given the data, the optimal configuration is 1080p Low, which leverages the Ryzen 5 5600's strong single-thread performance while minimizing the GTX 1050 Ti's workload. Users seeking higher visual fidelity should consider upgrading the GPU, as the CPU clearly has substantial headroom for more demanding graphics hardware.