Greedfall

Resolution Scaling

The measured frame rates across resolutions paint a clear picture of where the RTX 5060 begins to struggle in Greedfall. At 1080p with Low settings, the combo delivers 191.5 FPS, which drops to 134.2 FPS at 1440p and further to 76.8 FPS at 4K. That represents a 60% reduction from 1080p to 4K on Low settings, indicating that the GPU is doing progressively heavier lifting as pixel count rises.

Moving to High settings shows a similar trend with tighter margins. The 133.7 FPS at 1080p falls to 91.9 FPS at 1440p, then to 56.8 FPS at 4K. The scaling from 1440p to 4K is particularly steep—a 38% drop—which suggests the GPU's memory bandwidth and raw throughput become limiting factors at higher resolutions. The RTX 5060's 128-bit memory bus with 448.0 GB/s bandwidth is likely the constraint, as the 8 GB GDDR7 frame buffer gets saturated at 4K with High settings.

Ultra settings amplify this effect dramatically. The 90 FPS at 1080p collapses to 60.9 FPS at 1440p and then to 36 FPS at 4K. The 4K Ultra result is below the 60 FPS threshold that most gamers consider playable, and the scaling curve shows a near-linear relationship with pixel count—implying the GPU is the dominant bottleneck across all resolutions on this preset.

Interestingly, the gap between Low and Ultra narrows as resolution increases. At 1080p, Low is 101.5 FPS faster than Ultra (191.5 vs 90). At 4K, that gap shrinks to 40.8 FPS (76.8 vs 36). This convergence indicates that at 4K, the GPU is so heavily loaded that preset choice matters less—the limiting factor is raw pixel throughput rather than shading complexity or texture quality.

Settings Recommendations

The measured data suggests that High settings at 1440p offer the best balance for this combo. The 91.9 FPS result is comfortably above the 60 FPS playability threshold while retaining visual fidelity. Moving to Ultra at the same resolution drops to 60.9 FPS—still technically playable but with less headroom for demanding scenes. The 33.8% performance cost of Ultra over High at 1440p is substantial for what is likely a modest visual improvement in this 2019 Action RPG.

At 1080p, High settings at 133.7 FPS provide an excellent experience, and the jump to Ultra at 90 FPS remains smooth. However, the 43.7 FPS penalty is notable, and given that the game's release date suggests it was designed with less demanding hardware in mind, High is the pragmatic choice. Medium at 150 FPS offers minimal gains over High while sacrificing visual quality, making it a poor trade-off.

For 4K, the data shows that even High settings struggle to maintain 60 FPS, with the 56.8 FPS result falling just short. Low settings at 76.8 FPS are the only 4K option that clears the threshold, but the visual compromise is severe. The 36 FPS at Ultra is effectively unplayable for an action RPG requiring responsive combat. Most users will find 1440p High to be the sweet spot—it delivers smooth gameplay without the visual compromises of Low settings or the performance hit of Ultra.

CPU Role

The AMD Ryzen 7 7700 brings 8 cores and 16 threads from the Zen 4 architecture, with a base clock of 3.80 GHz and boost clock of 5.30 GHz. This is a 7000-series desktop processor on the AM5 socket, built on a 5 nm process. Its 32 MB of shared L3 cache and dual-channel DDR5 memory support with 83.2 GB/s bandwidth provide a solid foundation for gaming workloads.

In synthetic benchmarks, the CPU scores 8,484 in 3dmark_16_threads and 8,479 in 3dmark_max_threads, showing strong scaling from 8 threads (6,933) to 16 threads. Single-thread performance is 1,049 in 3dmark_single_thread, with Cinebench R23 scores of 29,302 multi-core and 4,136 single-core. These figures place the CPU in the 91st percentile of all tested processors, with an average benchmark score of 40,468.

For Greedfall specifically, the CPU appears well-suited. The game is an Action RPG from 2019, and its engine likely benefits from the 7700's strong single-thread performance while also utilizing multiple cores for physics and AI. The 5.30 GHz boost clock ensures responsive frame pacing, particularly at lower resolutions where CPU overhead is more visible. At 1080p Low, the 191.5 FPS result indicates the CPU is not holding back the GPU—the 7700's throughput is sufficient to feed the RTX 5060 even at high frame rates.

The nearest rivals to the 7700 include the AMD Ryzen 9 7940H with an average score of 40,431 (0.1% higher), the AMD Ryzen AI 9 365 at 40,262 (0.5% higher), and the Intel Core i9-13905H at 40,712 (0.6% higher). The 7700's 40,468 average sits between these mobile processors, though its desktop design with 65 W TDP likely provides more sustained performance.

How This Combo Ranks

The combination of the Ryzen 7 7700 and RTX 5060 ranks 827th out of 1,705 tested combos in Greedfall, placing it in the 48.5th percentile of all configurations. This is a middle-of-the-pack result, which is somewhat surprising given the individual component performance. The RTX 5060 sits in the 73rd percentile of all GPUs, while the CPU is in the 91st percentile—yet their pairing lands near the median for this game.

This ranking suggests that Greedfall's performance is not solely determined by raw hardware capability. The game's engine, released in 2019, may not fully utilize the modern features of either component. The RTX 5060's Blackwell 2.0 architecture with 30 RT cores and 120 tensor cores is likely overkill for this title, which predates widespread ray tracing adoption. Similarly, the 7700's Zen 4 architecture with its 5 nm process may be bottlenecked by the game's threading model.

The RTX 5060's nearest GPU rivals include the AMD Radeon RX 7700 XT with an average score of 30,097 (0% delta), the AMD Radeon RX 570 at 30,158 (0.2% higher), and the NVIDIA Tesla M60 at 29,969 (0.5% lower). The 5060's average benchmark score of 30,109 places it in a tight cluster, suggesting that the specific GPU model matters less than the overall system configuration for this game.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture with a GB206 chip manufactured on a 5 nm process. Its 8 GB of GDDR7 memory runs at 1750 MHz (28 Gbps effective) across a 128-bit bus, delivering 448.0 GB/s bandwidth. The GPU features 3,840 shading units, 120 TMUs, and 48 ROPs, with boost clock of 2497 MHz.

For Greedfall, the GPU's memory configuration is a double-edged sword. The 8 GB capacity is adequate for 1080p and 1440p at most settings, but 4K Ultra with high-resolution textures can push beyond this limit, as evidenced by the 36 FPS result. The 128-bit bus width is narrow by modern standards, though the GDDR7 memory's high effective speed partially compensates. The 19.18 TFLOPS FP32 performance and 299.6 GTexel/s texture rate are sufficient for the game's 2019-era graphics.

The GPU's synthetic benchmarks show a passmark_g3d score of 20,891 and a passmark_gpu_compute score of 10,899. Geekbench scores include 120,785 in OpenCL and 116,626 in Vulkan. These figures place the 5060 in the 73rd percentile of all GPUs, with an average benchmark score of 30,109. The nearest rival is the AMD Radeon RX 7700 XT with a nearly identical 30,097 average score.

In Greedfall, the GPU's performance scales predictably with resolution and settings, but the 4K results reveal its limits. The 56.8 FPS at High settings and 76.8 FPS at Low settings suggest that 4K gaming is possible only with significant compromises. The 1440p results are more promising, with High settings at 91.9 FPS providing a smooth experience. The GPU's 145 W TDP and dual-slot design indicate efficient power delivery, though the 300 W suggested PSU requirement should be considered for system builds.