Fivem

The AMD Ryzen 7 7700 and NVIDIA GeForce RTX 5060 combination was measured in Fivem, a multiplayer title from 2017. The CPU has a launch MSRP of $329, and the GPU has a launch MSRP of 299 USD. Benchmark results show a wide range of frame rates depending on resolution and settings, with the combo ranking 915 out of 1792 tested combinations. This analysis examines how the components scale, what the CPU and GPU contribute, and which settings offer the best experience.

Resolution Scaling

The measured FPS data reveals how the system responds to increasing pixel counts. At 1080p Low, the average frame rate is 197.5 FPS. Moving to 1440p Low drops that to 129.3 FPS, and at 4K Low it falls further to 74.5 FPS. The same pattern holds across all settings. For High, the progression is 124.9 FPS at 1080p, 82.1 FPS at 1440p, and 46.3 FPS at 4K. Ultra goes from 96.1 FPS at 1080p to 62 FPS at 1440p and 34.1 FPS at 4K. Medium sits between: 158.2 FPS at 1080p, 101.8 FPS at 1440p, and 56.3 FPS at 4K.

The drop from 1080p to 1440p is consistent across settings—roughly a 30–35% reduction in FPS—while the drop from 1440p to 4K is steeper, around 40–45%. This suggests that the GPU becomes more of a limiting factor as resolution increases, but the CPU still plays a role at lower resolutions. At 1080p Low, the system pushes nearly 200 FPS, which is far beyond typical display refresh rates, indicating that the CPU is capable of feeding the GPU at high frame rates. At 4K, the FPS values are much lower, and the gap between Low and Ultra narrows in absolute terms: 74.5 FPS vs 34.1 FPS, a difference of 40.4 FPS. At 1080p, the same comparison yields 197.5 vs 96.1, a difference of 101.4 FPS. This implies that at 4K, the GPU is saturated and settings have less relative impact.

FAQ

Q: What is the average FPS at 1080p Ultra?

A: The measured average FPS at 1920x1080 with Ultra settings is 96.1.

Q: How does the CPU compare to its nearest rival in average benchmark score?

A: The AMD Ryzen 7 7700 has an average benchmark score of 40468. Its nearest rival, the AMD Ryzen 9 7940H, scores 40431, a delta of 0.1%. The Intel Core i9-13905H scores 40712, a delta of -0.6%, meaning the 7700 is slightly slower than that rival.

Q: What is the GPU's memory bandwidth?

A: The NVIDIA GeForce RTX 5060 has a memory bandwidth of 448.0 GB/s, with 8 GB of GDDR7 memory on a 128-bit bus.

Q: What is the combo's rank among all tested combinations?

A: The combo ranks 915 out of 1792 tested combinations, placing it just above the median.

Q: What is the CPU's boost clock?

A: The AMD Ryzen 7 7700 has a boost clock of 5.30 GHz, with a base clock of 3.80 GHz.

Q: What is the GPU's boost clock?

A: The NVIDIA GeForce RTX 5060 has a boost clock of 2497 MHz and a base clock of 2280 MHz.

CPU Role

The AMD Ryzen 7 7700 is an 8-core, 16-thread processor based on Zen 4 architecture, built on a 5 nm process. It operates at a base clock of 3.80 GHz and boosts to 5.30 GHz, with a TDP of 65 W. The CPU features 64 KB of L1 cache per core, 1 MB of L2 per core, and 32 MB of shared L3 cache. It supports DDR5 memory in a dual-channel configuration, with a memory bandwidth of 83.2 GB/s. The CPU also includes integrated Radeon Graphics, though the discrete GPU handles rendering in this test.

Benchmark results show strong performance. In Cinebench R23, the CPU scores 29302 in multi-core and 4136 in single-core. The 3DMark single-thread score is 1049, and the max-thread score is 8479. The CPU's average benchmark score is 40468, placing it in the 91st percentile of all CPUs. Its nearest rivals include the AMD Ryzen 9 7940H (40431, +0.1% delta), the AMD Ryzen AI 9 365 (40262, +0.5%), the Intel Core i9-13905H (40712, -0.6%), and the Intel Core Ultra 5 235T (39995, +1.2%). This places the 7700 in a tight cluster, with the i9-13905H being the only rival that outperforms it by a measurable margin.

In Fivem, a multiplayer game that often involves many players and complex scripts, the CPU's 8 cores and 16 threads are well-suited to handle the overhead. The high single-thread performance (Cinebench R23 single 4136) is particularly relevant, as many game engines rely on a few heavily loaded threads. The 32 MB L3 cache helps reduce memory latency, and the 83.2 GB/s memory bandwidth supports fast data movement. The measured FPS at 1080p Low (197.5) suggests that the CPU is not a bottleneck at that resolution, as the frame rate is high enough to saturate most displays. However, at 4K, the CPU's role diminishes, and the GPU becomes the primary limiter.

Measured FPS Breakdown

The following table lists all measured average FPS values from the FACT PACK:

| Resolution | Settings | Avg FPS |

|------------|----------|---------|

| 3840x2160 | High | 46.3 |

| 3840x2160 | Low | 74.5 |

| 3840x2160 | Medium | 56.3 |

| 3840x2160 | Ultra | 34.1 |

| 2560x1440 | High | 82.1 |

| 2560x1440 | Low | 129.3 |

| 2560x1440 | Medium | 101.8 |

| 2560x1440 | Ultra | 62 |

| 1920x1080 | High | 124.9 |

| 1920x1080 | Low | 197.5 |

| 1920x1080 | Medium | 158.2 |

| 1920x1080 | Ultra | 96.1 |

At 1080p, the system delivers playable frame rates across all settings, with Low exceeding 190 FPS and Ultra still above 90 FPS. At 1440p, Low and Medium remain above 100 FPS, while High and Ultra drop to 82.1 and 62 FPS respectively. At 4K, only Low reaches 74.5 FPS; Medium and High fall below 60 FPS, and Ultra drops to 34.1 FPS. The data shows a clear hierarchy: higher resolutions and higher settings both reduce FPS, but the impact of settings is more pronounced at lower resolutions. For example, at 1080p, the difference between Low and Ultra is 101.4 FPS, while at 4K it is 40.4 FPS. This indicates that the GPU is the limiting factor at 4K, while at 1080p the CPU and GPU are more balanced.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture, using a 5 nm process. It has 8 GB of GDDR7 memory on a 128-bit bus, with a memory bandwidth of 448.0 GB/s. The GPU's base clock is 2280 MHz, and the boost clock is 2497 MHz. It features 3840 shading units, 120 texture mapping units, 48 ROPs, 30 RT cores, and 120 tensor cores. The pixel rate is 119.9 GPixel/s, and the texture rate is 299.6 GTexel/s. FP32 performance is 19.18 TFLOPS. The GPU has a TDP of 145 W and connects via PCIe 5.0 x8.

In benchmark tests, the RTX 5060 scores 20891 in Passmark G3D and 120785 in Geekbench OpenCL. Its average benchmark score is 30109, placing it in the 73rd percentile of all GPUs. Its nearest rivals include the AMD Radeon RX 7700 XT (30097, 0% delta), the AMD Radeon RX 570 (30158, -0.2%), the NVIDIA Tesla M60 (29969, +0.5%), and the NVIDIA GeForce RTX 5070 Mobile (29928, +0.6%). The RTX 5060 is essentially tied with the RX 7700 XT, and slightly behind the RX 570 in average score, though the RX 570 is an older card.

In Fivem, the GPU's performance is most evident at higher resolutions. At 4K Ultra, the system only manages 34.1 FPS, which is below the threshold for smooth gameplay. The 8 GB VRAM may be a limiting factor at 4K with high textures, though the data does not directly measure VRAM usage. The high memory bandwidth (448 GB/s) helps maintain throughput at high resolutions, but the GPU's raw compute (19.18 TFLOPS) is not sufficient to keep frame rates high at 4K Ultra. At 1080p, the GPU is less stressed, and the CPU can push frame rates above 190 FPS on Low settings. The GPU's percentile (73) indicates it is above average, but not a top-tier part, which aligns with the observed 4K performance.

Settings Recommendations

Based on the measured FPS, the optimal settings depend on the target resolution and desired frame rate. For 1080p, all settings are playable, but High (124.9 FPS) and Ultra (96.1 FPS) offer a good balance of visual quality and smoothness. For 1440p, Medium (101.8 FPS) and High (82.1 FPS) are the best choices; Low (129.3 FPS) is also viable for competitive play, while Ultra (62 FPS) is borderline. For 4K, only Low (74.5 FPS) provides a consistently smooth experience; Medium (56.3 FPS) is playable but may dip below 60 FPS in demanding scenes, and High (46.3 FPS) and Ultra (34.1 FPS) are not recommended for fast-paced multiplayer.

The data suggests that for a 60 FPS target, 1440p High (82.1 FPS) and 4K Low (74.5 FPS) are the highest settings that meet that threshold. For 100+ FPS, 1080p High (124.9 FPS) and 1440p Medium (101.8 FPS) are the best options. Players prioritizing visual fidelity over frame rate could use 1080p Ultra (96.1 FPS) or 1440p High (82.1 FPS). The measured values indicate that the system is well-suited for 1080p and 1440p gaming, but struggles at 4K with high settings.

How This Combo Ranks

The AMD Ryzen 7 7700 + NVIDIA GeForce RTX 5060 combination ranks 915 out of 1792 tested combos in Fivem, placing it just above the median (51st percentile). This is notably lower than the individual component percentiles: the CPU is in the 91st percentile, and the GPU is in the 73rd percentile. The discrepancy suggests that the pairing may not be fully optimized for this specific game, or that Fivem's performance is limited by factors other than raw hardware power, such as server-side performance or game engine inefficiencies.

The combo's rank indicates that it outperforms about half of all tested combinations, but it is not a top-tier setup. The CPU's strong single-thread and multi-thread scores (Cinebench R23 single 4136, multi 29302) and the GPU's solid mid-range performance (Passmark G3D 20891) combine to deliver playable frame rates at 1080p and 1440p, but the 4K results are below average for high settings. The data shows that the combo is a capable mid-range pairing, but it does not excel in Fivem at 4K, where the GPU's 8 GB VRAM and 19.18 TFLOPS are insufficient for Ultra settings. Overall, the rank reflects a balanced but not exceptional performance profile, consistent with the component specifications.