Fivem

# Fivem Performance Analysis: Intel Core Ultra 7 270K Plus + NVIDIA GeForce RTX 2060

The combination of the Intel Core Ultra 7 270K Plus processor and NVIDIA GeForce RTX 2060 graphics card produces a measurable performance profile in Fivem, a multiplayer title released in 2017. This analysis draws exclusively from benchmark data collected for this specific configuration, examining how the CPU's 24 cores and GPU's 6 GB VRAM interact across resolutions and settings presets. The combo ranks 2345th out of 3005 tested combinations in this game, placing it in the lower-middle portion of the performance distribution, yet the measured frame rates reveal a nuanced picture where settings and resolution choices dramatically alter the experience.

FAQ

Q: What is the highest average FPS this combo achieves in Fivem?

A: The highest measured average frame rate is 145 FPS, achieved at 1920x1080 resolution with Low settings. This represents the ceiling for this configuration, with the next highest being 115 FPS at the same resolution with Medium settings.

Q: How does this combo rank among all tested combinations in Fivem?

A: This combo ranks 2345th out of 3005 tested combinations, placing it in the 22nd percentile from the top. The data indicates that roughly 78% of tested combos perform better, though this ranking reflects the specific pairing rather than either component individually.

Q: What is the lowest average FPS recorded for this configuration?

A: The lowest measured average is 26 FPS at 3840x2160 resolution with Ultra settings. This represents a scenario where both resolution and graphics quality push the RTX 2060 to its limits, resulting in a barely playable frame rate.

Q: Does the RTX 2060's 6 GB VRAM become a limiting factor at higher resolutions?

A: The data shows a clear performance drop as resolution increases, with 4K Ultra hitting 26 FPS versus 71 FPS at 1080p Ultra. While VRAM capacity is a plausible contributor, the benchmark results alone cannot isolate VRAM limitations from overall GPU compute constraints.

Q: How does the CPU's 24-core configuration influence Fivem performance?

A: The Core Ultra 7 270K Plus has 24 cores and 24 threads, with a boost clock of 5.50 GHz. In a multiplayer game like Fivem, this thread count can support many concurrent entities, though the measured FPS patterns suggest the GPU becomes the primary bottleneck at higher resolutions and settings.

Q: Which settings preset provides the most balanced experience at 1920x1080?

A: Medium settings at 1080p deliver 115 FPS average with a minimum of 97 FPS and maximum of 132 FPS. This represents the highest fidelity option that maintains a minimum above 60 FPS, whereas High drops to 92 FPS and Ultra to 71 FPS.

GPU Role

The NVIDIA GeForce RTX 2060 serves as the graphics processing unit in this configuration, built on the Turing architecture with a TU106 chip manufactured on a 12 nm process. Its 6 GB of GDDR6 memory operates across a 192-bit bus, yielding 336.0 GB/s of memory bandwidth. The GPU's base clock runs at 1365 MHz with a boost clock of 1680 MHz, while memory runs at 1750 MHz (14 Gbps effective). These specifications position the RTX 2060 as a mid-range card from the GeForce 20-series, with its 1920 shading units and 48 ROPs handling rasterization tasks in Fivem.

The measured FPS data reveals how the RTX 2060's capabilities scale with workload. At 1920x1080, the GPU delivers 145 FPS on Low settings, 115 FPS on Medium, 92 FPS on High, and 71 FPS on Ultra. This progression shows a consistent 30-40% performance penalty for each major settings tier, reflecting the increasing pixel and texture workloads placed on the GPU. The transition from Low to Medium costs 30 FPS, from Medium to High costs 23 FPS, and from High to Ultra costs 21 FPS, indicating diminishing returns as settings approach maximum quality.

At 2560x1440, the same settings progression yields 96 FPS (Low), 75 FPS (Medium), 60 FPS (High), and 47 FPS (Ultra). The resolution increase from 1080p to 1440p reduces frame rates by roughly 34-38% across all settings, consistent with the pixel count increase of 78%. This scaling behavior suggests the GPU is operating near its throughput limits, as pure pixel-count scaling would predict a 44% drop if the GPU were fully saturated at 1080p.

The 4K results at 3840x2160 show 53 FPS (Low), 42 FPS (Medium), 33 FPS (High), and 26 FPS (Ultra). These numbers indicate that even at Low settings, 4K resolution pushes the RTX 2060 to its practical limits for smooth gameplay. The GPU's 6 GB VRAM capacity becomes increasingly relevant at this resolution, though the benchmark data alone cannot definitively separate VRAM capacity from raw compute limitations.

The RTX 2060's benchmark scores provide context for its overall performance class. It scores 14111 in Passmark G3D, 1242 in 3DMark Steel Nomad DX12, and 65014 in Geekbench OpenCL. Its percentile ranking of 58 places it just above the median of all GPUs, while its nearest rivals include the GTX 580 (0% delta), Radeon 680M (0.1% delta), RTX 3050 OEM (0.6% delta), and RX 7600 (0.8% delta). These close margins indicate the RTX 2060 sits in a tightly contested performance band.

How This Combo Ranks

Among the 3005 tested combinations in Fivem, this CPU-GPU pairing holds the 2345th position. This rank places it in the bottom 22% of all tested combos, suggesting that while the configuration is functional, many other pairings deliver higher frame rates in this specific game. The ranking reflects the combined capability of both components rather than either one individually, and the measured data shows that the RTX 2060 is the more limiting factor in most scenarios.

The combo's rank of 2345 out of 3005 means that 660 combinations perform worse, while 2344 perform better. This distribution indicates a significant performance gap between this pairing and the top configurations, likely dominated by more powerful GPUs. However, the rank alone does not capture the playability at different settings, as the 1080p results show this combo can deliver smooth frame rates when settings are adjusted appropriately.

The Intel Core Ultra 7 270K Plus processor alone ranks at the 96th percentile among all CPUs, with an average benchmark score of 93785. Its nearest rivals include the Intel Xeon 6520P (0% delta), AMD EPYC 4564P (-1.5% delta), AMD EPYC 9175F (-1.9% delta), and AMD EPYC 4565P (-2.1% delta). This high CPU percentile contrasts sharply with the combo's low game ranking, strongly suggesting that the GPU is the performance bottleneck in Fivem.

Similarly, the RTX 2060's 58th percentile among GPUs and average benchmark score of 15290 place it near the middle of the GPU distribution. The combination of a top-tier CPU with a mid-tier GPU creates an imbalanced pairing where the CPU's potential is largely unrealized in GPU-bound scenarios. At 4K Ultra, the combo achieves only 26 FPS despite the CPU's high benchmark scores, confirming the GPU's dominant role in limiting performance.

Measured FPS Breakdown

At 1920x1080, the configuration delivers its strongest performance across all settings. Low settings produce 145 FPS average, which is the highest measured value for this combo. Medium settings yield 115 FPS with a minimum of 97 FPS and maximum of 132 FPS, providing a smooth experience with headroom above standard 60 FPS displays. High settings drop to 92 FPS average, while Ultra settings fall to 71 FPS. These 1080p results show that the combo can handle high refresh rate displays at lower settings, or maintain 60+ FPS at Ultra quality.

Moving to 2560x1440, the performance decreases predictably. Low settings achieve 96 FPS, Medium delivers 75 FPS with a minimum of 64 FPS and maximum of 87 FPS, High reaches 60 FPS, and Ultra drops to 47 FPS. The 1440p results indicate that Medium settings provide the best balance for 60 FPS gaming, while High settings barely maintain the 60 FPS threshold and Ultra falls below 50 FPS.

At 3840x2160, the combo struggles to maintain playable frame rates. Low settings produce 53 FPS, Medium achieves 42 FPS with a minimum of 36 FPS and maximum of 48 FPS, High drops to 33 FPS, and Ultra falls to 26 FPS. These 4K results demonstrate that the RTX 2060 lacks the raw throughput for high-quality 4K gaming in Fivem, with even Low settings failing to reach 60 FPS.

The minimum FPS data provides additional insight into frame time consistency. At 1080p Medium, the minimum of 97 FPS ensures no drops below 60 FPS. At 1440p Medium, the minimum of 64 FPS still maintains a 60 FPS floor. At 4K Medium, the minimum of 36 FPS indicates noticeable stuttering potential, while the maximum of 48 FPS shows the ceiling is far from smooth. These minimum values demonstrate how resolution increases amplify frame time variability.

CPU Role

The Intel Core Ultra 7 270K Plus is a 24-core, 24-thread processor from the Core Ultra Series 2, built on Arrow Lake Refresh architecture with a 3 nm process from TSMC. Its base clock runs at 3.70 GHz with a boost clock of 5.50 GHz, and it carries 36 MB of shared L3 cache. The CPU supports DDR5 memory with dual-channel configuration, providing 115.2 GB/s of memory bandwidth. Its Passmark multithread score of 68574 and single-thread score of 5068 demonstrate strong computational performance across both multi-threaded and single-threaded workloads.

In Fivem, a multiplayer game that must track numerous players, vehicles, and world interactions, CPU performance plays a critical role. The 24 threads can handle many concurrent simulation tasks, and the high boost clock of 5.50 GHz ensures responsive single-threaded performance for game logic. The CPU's Cinebench R23 scores of 44253 multicore and 2439 singlecore further underscore its capability, placing it at the 96th percentile among all CPUs.

However, the measured FPS data reveals that CPU performance is not the primary constraint in most scenarios. At 1080p Low, the combo achieves 145 FPS, which could theoretically be CPU-limited if the GPU were faster, but the RTX 2060's mid-range position suggests the GPU is still the limiting factor. The consistent FPS drops when moving from 1080p to 1440p to 4K at each settings tier indicate GPU-bound behavior, as a CPU bottleneck would show similar FPS regardless of resolution.

The CPU's benchmarks show it far outperforms its nearest rivals in the overall CPU ranking. The Xeon 6520P matches its average score (0% delta), while EPYC processors trail by 1.5-2.1%. This performance headroom means the CPU is unlikely to bottleneck the RTX 2060 in Fivem, even at lower resolutions where GPU load decreases. The data suggests that upgrading the GPU would yield substantial FPS improvements, while CPU upgrades would provide minimal gains.

Settings Recommendations

Based on the measured FPS data, the optimal settings preset depends heavily on the target resolution and desired frame rate. At 1920x1080, Medium settings deliver 115 FPS average with a 97 FPS minimum, providing an excellent balance of visual quality and smoothness. High settings at 92 FPS remain comfortable for 60 Hz displays and offer improved visuals, while Ultra at 71 FPS still maintains a solid frame rate for most monitors. For high refresh rate displays, Low settings at 145 FPS unlock the full potential of 144 Hz panels.

At 2560x1440, Medium settings produce 75 FPS average with a 64 FPS minimum, making it the recommended preset for maintaining smooth gameplay. High settings at 60 FPS exactly hit the standard refresh rate target but offer no headroom for demanding scenes. Low settings at 96 FPS provide the best experience for higher refresh rate monitors, while Ultra at 47 FPS falls below the 60 FPS threshold and should be avoided for competitive play.

At 3840x2160, no settings preset achieves 60 FPS, making 4K gaming impractical with this combo. Low settings at 53 FPS come closest, but the experience will still involve noticeable frame pacing issues. Medium settings at 42 FPS are borderline playable for slower-paced content, while High and Ultra at 33 and 26 FPS respectively are best suited for screenshots rather than active gameplay.

For the best overall experience, Medium settings at 1920x1080 offer the strongest combination of visual quality and performance, with a 115 FPS average and 97 FPS minimum providing a consistently smooth experience. Players prioritizing maximum visual fidelity should use Ultra at 1080p, where 71 FPS remains above the 60 FPS threshold. Those with 1440p monitors should select Medium settings to maintain smooth gameplay, accepting reduced visual quality compared to 1080p Ultra.

Resolution Scaling

The FPS progression from 1080p to 1440p to 4K reveals important information about which component limits performance. At Low settings, the FPS drops from 145 at 1080p to 96 at 1440p to 53 at 4K. The 1080p to 1440p drop represents a 33.8% reduction, while the 1440p to 4K drop represents a 44.8% reduction. These percentages exceed the pixel count increases (78% for 1080p to 1440p, 125% for 1440p to 4K), indicating that the GPU becomes progressively more saturated as resolution increases.

At Medium settings, the progression goes from 115 FPS at 1080p to 75 FPS at 1440p to 42 FPS at 4K. The 1080p to 1440p reduction is 34.8%, and the 1440p to 4K reduction is 44.0%. These consistent percentage drops across settings tiers confirm that resolution scaling behavior is stable regardless of graphics quality, pointing to a consistent GPU bottleneck.

For High settings, the FPS drops from 92 at 1080p to 60 at 1440p to 33 at 4K, representing 34.8% and 45.0% reductions respectively. Ultra settings show 71 FPS at 1080p, 47 FPS at 1440p, and 26 FPS at 4K, with reductions of 33.8% and 44.7%. The remarkable consistency of these scaling percentages across all four settings presets strongly indicates that the RTX 2060 is the limiting component, as the CPU's performance would not scale with resolution in this uniform manner.

The data shows that the RTX 2060's occupancy increases with resolution, and the 6 GB VRAM capacity becomes a growing concern at 4K. The combination of higher pixel counts and larger texture memory requirements stretches the GPU's resources thin. The CPU's 96th percentile ranking and strong benchmark scores suggest it could support significantly higher frame rates with a more powerful GPU, making this pairing clearly GPU-bound in Fivem across nearly all tested configurations.

The resolution scaling analysis also reveals that the transition from 1080p to 1440p is less punishing than from 1440p to 4K. This suggests that the RTX 2060 operates in a more efficient range at 1080p, with 1440p representing a moderate stretch and 4K pushing the GPU well beyond its comfortable operating envelope. For users considering this combo, 1080p remains the sweet spot, while 1440p is viable with settings adjustments, and 4K should be avoided for smooth gameplay.