Fivem

The AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 3060 Ti combination presents a fascinating study in bottleneck dynamics within Fivem. The processor is a 16-core, 32-thread Zen 5 part based on the Granite Ridge architecture, with a base clock of 4.30 GHz and a boost clock of 5.70 GHz. It carries a substantial 128 MB of shared L3 cache, which is critical for the heavily modded, entity-rich environments that define Fivem's multiplayer roleplay servers. In contrast, the GPU is an Ampere-based RTX 3060 Ti with 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. Its boost clock is 1665 MHz, and its pixel rate is 133.2 GPixel/s.

CPU Role — cores, clocks, and how they relate to this game's results

Fivem is a multiplayer modification framework that often shifts the performance burden onto the CPU, particularly in densely populated urban areas where dozens of player models, vehicles, and scripted events are active. The Ryzen 9 9950X3D's architecture is well-suited to this scenario. Its 16 cores and 32 threads provide immense parallel processing headroom, but the game's engine typically doesn't leverage all of them efficiently. Instead, the large 128 MB L3 cache and high boost clock of 5.70 GHz are the key assets. The data suggests that the CPU's single-threaded performance, reflected in its 3dmark_single_thread score of 1292 and PassMark single-thread score of 4737, is robust enough to handle the primary game logic.

The processor's benchmark scores are exceptional. Its Cinebench R23 multicore score of 59712 and Geekbench multicore score of 22515 place it in the 96th percentile of all CPUs. When compared to its nearest rivals, the data shows a minimal performance delta. It scores 0.9% higher than the Intel Xeon Platinum 8270 and 1.8% higher than the AMD Ryzen 9 9950X. However, it trails the Intel Xeon 6517P by 1.9% and the Intel Core i7-14700KF by 2.2% in average benchmark scores. This indicates that while the 9950X3D is a top-tier CPU, its raw compute advantage over other high-end chips is marginal in synthetic tests. In Fivem, this raw power may not be the limiting factor; rather, the game's ability to utilize the cache hierarchy and high clock speeds will dictate the frame rate, especially at lower resolutions where the GPU is less burdened.

GPU Role — VRAM, clocks, and how they relate to this game's results

The RTX 3060 Ti occupies a different tier. It is an end-of-life product from the GeForce 30-series, built on Samsung's 8 nm process. With 4864 shading units and 152 texture mapping units, it is a capable mid-range performer. Its 8 GB of VRAM is a potential point of concern for Fivem, as high-resolution texture packs and custom vehicle models can quickly consume memory. The GPU's benchmarks show it in the 69th percentile of all GPUs, with a PassMark G3D score of 20349. Its rivals are closely matched, with the AMD Radeon RX 6700M being 0.2% faster, the RX 6600 being 0.5% faster, and the Radeon 890M also 0.5% faster. The RTX 3060 Ti is only 0.7% faster than the older AMD Radeon RX 580 2048SP.

The GPU's clock behavior is more relevant than its raw compute. The boost clock of 1665 MHz is modest, but the pixel rate of 133.2 GPixel/s and texture rate of 253.1 GTexel/s are solid for its class. The 8 GB VRAM capacity is the most likely bottleneck at 4K Ultra settings, where the data shows a significant frame rate drop. The GPU's memory bandwidth of 448.0 GB/s is sufficient for 1080p and 1440p gaming, but at 4K, the combination of higher memory pressure and the need to render nearly four times the pixels of 1080p will saturate its capabilities.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the Ryzen 9 9950X3D and RTX 3060 Ti ranks at 1267 out of 1792 tested combos in Fivem. This places it in the 71st percentile of all tested hardware pairings. This ranking is surprisingly low for a CPU that performs in the 96th percentile and a GPU in the 69th percentile. The data implies that the pairing is not synergistic for this specific game. The CPU's massive power is being held back by the GPU's mid-range capabilities. In a game like Fivem, where the CPU is typically the primary driver of frame rates, you might expect a higher rank. However, the ranking suggests that other combos with a more balanced CPU-GPU split achieve better overall FPS. The rank of 1267 indicates that while this setup is capable, it is outperformed by many other combinations, likely those with a less powerful CPU and a more powerful GPU, which can push higher frame rates in GPU-bound scenarios.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured data provides a clear picture of performance scaling. At 1920x1080, the average frame rates are strong. Low settings yield 156.9 FPS, Medium drops to 128.9 FPS, High produces 98.3 FPS, and Ultra falls to 78.8 FPS. Moving to 2560x1440, the frame rates decline predictably. Low settings average 104.7 FPS, Medium 80.4 FPS, High 67.4 FPS, and Ultra 54 FPS. At 3840x2160, the GPU begins to struggle significantly. Low settings average 57 FPS, Medium 45 FPS, High 38.6 FPS, and Ultra drops to a barely playable 26.9 FPS. These numbers show a clear trend: the GPU is the limiting factor at higher resolutions. The transition from 1080p to 1440p results in a roughly 33% drop in FPS across settings, while the jump from 1440p to 4K is even more punishing, with a further 45% drop.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The frame rate scaling from 1080p to 4K is a textbook example of GPU-bound behavior. At 1080p Low, the CPU is able to feed the GPU enough data to achieve 156.9 FPS. At 4K Low, the same settings only yield 57 FPS, a drop of 63.7%. This massive reduction is not due to CPU limitations; the CPU's single-thread performance is sufficient to handle the game logic at both resolutions. Instead, the RTX 3060 Ti is being overwhelmed by the pixel count. The data shows that at 4K, even Low settings push the GPU to its limits, resulting in a frame rate that is only 36% of the 1080p Low result. The gap between High and Ultra settings also widens at higher resolutions. At 1080p, the difference between High and Ultra is 19.5 FPS. At 4K, the difference is 11.7 FPS, but the percentage drop is more severe. This indicates that the GPU's shading units and ROPs are saturated, and the 8 GB VRAM is likely being exhausted at 4K Ultra, leading to the low 26.9 FPS average.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured data, the optimal settings depend heavily on the target resolution and refresh rate. For 1080p gaming, the High preset at 98.3 FPS is the sweet spot, offering a significant visual upgrade over Medium (128.9 FPS) while maintaining a frame rate well above 60 FPS for smooth gameplay. The Ultra preset at 78.8 FPS is still playable but offers diminishing returns in visual fidelity for the performance cost. At 1440p, the Medium preset at 80.4 FPS is the recommended choice. It provides a good balance of visual quality and performance, staying above the 60 FPS threshold. The High preset at 67.4 FPS is also viable, but the Low preset at 104.7 FPS is less desirable due to the visual compromise. At 4K, the data suggests that the High preset at 38.6 FPS and Ultra at 26.9 FPS are not suitable for a smooth experience. The Low preset at 57 FPS is the only playable option, but it sacrifices most visual effects. The Medium preset at 45 FPS is a borderline experience, playable for slower-paced roleplay but not for competitive scenarios. Therefore, the data recommends 1080p High or 1440p Medium for the best overall experience.

FAQ

Q: What is the average frame rate at 1080p with Ultra settings?

A: The measured average frame rate at 1920x1080 with Ultra settings is 78.8 FPS.

Q: How does the RTX 3060 Ti perform relative to the AMD Radeon RX 6600 in synthetic benchmarks?

A: The benchmark data shows the RTX 3060 Ti has an average score that is 0.5% lower than the AMD Radeon RX 6600.

Q: Is the CPU or GPU the primary bottleneck at 4K resolution?

A: The data indicates the GPU is the primary bottleneck at 3840x2160. The average frame rate drops to 38.6 FPS at High settings, while the CPU's high benchmark scores suggest it is not the limiting factor.

Q: What is the rank of this CPU and GPU combo in Fivem?

A: The combo ranks at 1267 out of 1792 tested combinations in the game.

Q: What is the total L3 cache available on the Ryzen 9 9950X3D?

A: The processor has a shared L3 cache of 128 MB.

Q: What is the difference between the Low and High presets at 2560x1440?

A: The measured average FPS difference is 37.3 FPS, with Low at 104.7 FPS and High at 67.4 FPS.