Fivem

Fivem is a demanding multiplayer modification that scales heavily with both CPU and GPU resources. The measured data for the Intel Core Ultra 5 225 and NVIDIA GeForce RTX 3060 Ti combination shows a configuration that is capable of high refresh rates at lower resolutions but begins to buckle under the load of 4K. The pair sits at rank 1461 out of 3005 tested combos, placing it in the upper half of all systems tested for this title. This analysis breaks down the measured performance across resolutions and settings, interpreting what the numbers reveal about the hardware's strengths and limitations in Fivem.

Resolution Scaling

The performance drop from 1080p to 4K is significant and reveals a clear shift in bottleneck. At 1920x1080 with Low settings, the system averages 196 FPS, a figure that demonstrates the CPU's ability to feed frames rapidly. Moving to 2560x1440 on the same Low preset drops the average to 129 FPS, a reduction of 67 FPS or roughly 34%. The scaling continues at 3840x2160, where Low settings produce an average of 72 FPS, which is a further drop of 57 FPS from the 1440p result. This progression shows that even at the lowest graphical settings, the GPU is becoming the limiting factor as resolution increases.

The data indicates a nonlinear scaling pattern that is typical of a system transitioning from a CPU-bound state to a GPU-bound state. At 1080p, the RTX 3060 Ti has ample headroom to render frames quickly, and the Core Ultra 5 225's single-thread performance is the primary driver of the high frame rates. By 4K, however, the pixel count has quadrupled, and the GPU's fill rate and memory bandwidth become the dominant constraints. The 4K High preset yields 45 FPS, which is a 51 FPS drop from the 1080p High result of 124 FPS. This indicates that the RTX 3060 Ti's 8 GB of VRAM and 448.0 GB/s of bandwidth are sufficient for 1080p and 1440p gaming but are overwhelmed at 4K, especially with higher graphical detail.

The scaling pattern also highlights the diminishing returns of lowering settings at 4K. At 4K, the difference between Low (72 FPS) and Medium (56 FPS) is 16 FPS, while the difference between High (45 FPS) and Ultra (35 FPS) is only 10 FPS. This suggests that at 4K, the GPU is so heavily loaded that even modest setting reductions cannot fully compensate for the resolution's demands. In contrast, at 1080p, the gap between Low (196 FPS) and Medium (155 FPS) is 41 FPS, showing that the GPU has more headroom to handle settings changes without being the limiting factor.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture with an 8 nm process node and features 4864 shading units, 152 TMUs, and 80 ROPs. Its memory subsystem consists of 8 GB of GDDR6 on a 256-bit bus, providing 448.0 GB/s of bandwidth. The GPU's base clock is 1410 MHz with a boost clock of 1665 MHz, and it delivers 16.20 TFLOPS of FP32 performance. These specifications place the card in the 59th percentile of all GPUs, with an average benchmark score of 16129.

The measured FPS data shows that the RTX 3060 Ti is well-suited for 1080p and 1440p gaming in Fivem. At 1080p, the GPU easily handles all settings presets, with the Ultra preset still producing an average of 96 FPS. This indicates that the card's 8 GB VRAM is not a limiting factor at this resolution, and its compute power is sufficient for the game's rendering demands. At 1440p, the card remains capable, with the High preset delivering 81 FPS and the Ultra preset maintaining 63 FPS. These are playable frame rates for most gamers, though they do not fully utilize high refresh rate monitors.

However, the 4K results expose the RTX 3060 Ti's limitations. The Ultra preset at 4K averages just 35 FPS, which is below the threshold for smooth gameplay. The 8 GB VRAM is likely a contributing factor, as Fivem's detailed textures and multiplayer environments can exceed this capacity at 4K. The GPU's 448.0 GB/s bandwidth also becomes a bottleneck at this resolution, as the card struggles to keep up with the massive data throughput required for 4K rendering. The results suggest that the RTX 3060 Ti is best considered a 1440p-class card for Fivem, with 4K gaming requiring significant setting compromises.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Fivem?

A: The data indicates that 2560x1440 is the optimal resolution for this configuration. At 1440p, the High preset averages 81 FPS, and even the Ultra preset maintains 63 FPS, providing a good balance between visual fidelity and smooth gameplay.

Q: How does the RTX 3060 Ti compare to its nearest rivals in this game?

A: The RTX 3060 Ti has an average benchmark score of 16129, which is 0.7% higher than the AMD Radeon RX 9060 and 1.4% higher than both the AMD Radeon Pro 5600M and the AMD Radeon RX 5700 XT. This places it slightly ahead of these competing cards.

Q: Is the CPU or GPU the limiting factor at 1080p with Low settings?

A: At 1080p Low, the system achieves 196 FPS, which is the highest measured result. This suggests that the Intel Core Ultra 5 225's single-thread performance is the primary driver, as the GPU is not being fully utilized at this low resolution and settings level.

Q: Can this system handle 4K gaming in Fivem?

A: The system can run Fivem at 4K, but with significant compromises. The Low preset averages 72 FPS, which is playable, but the High and Ultra presets drop to 45 FPS and 35 FPS respectively, indicating that 4K is not a comfortable resolution for this GPU.

Q: What is the impact of the Core Ultra 5 225's CPU performance on Fivem?

A: The Core Ultra 5 225 scores 4412 on the Passmark single-thread test and 25891 on Cinebench R23 multi-core. These scores, combined with its 85th percentile ranking, indicate strong per-core performance that is crucial for Fivem's multiplayer environments, which often have high CPU demands.

Q: How does the system's performance rank among all tested configurations?

A: This combo ranks 1461 out of 3005 tested combinations for Fivem, placing it in the upper half of all systems. This indicates that it is a capable setup for this game, though not at the top tier of performance.

Measured FPS Breakdown

The measured data provides a comprehensive view of performance across three resolutions and four settings presets. At 1920x1080, the system delivers excellent frame rates across the board. The Low preset averages 196 FPS, Medium averages 155 FPS with a range of 131 to 178 FPS, High averages 124 FPS, and Ultra averages 96 FPS. These numbers show that the RTX 3060 Ti has ample performance headroom at 1080p, allowing gamers to max out settings while still maintaining high refresh rates.

Moving to 2560x1440, the performance remains strong but shows the expected drop from the increased pixel count. The Low preset averages 129 FPS, Medium averages 102 FPS with a range of 87 to 117 FPS, High averages 81 FPS, and Ultra averages 63 FPS. The Medium preset's minimum of 87 FPS indicates that even during demanding scenes, the system stays above the 60 FPS threshold, making 1440p a viable resolution for competitive play.

At 3840x2160, the performance drops significantly, revealing the GPU's limitations. The Low preset averages 72 FPS, which is still playable, but the Medium preset drops to 56 FPS with a minimum of 48 FPS. The High preset averages 45 FPS, and the Ultra preset averages just 35 FPS. These numbers show that 4K gaming requires substantial setting reductions to achieve playable frame rates, and even then, the system struggles to maintain consistent performance.

CPU Role

The Intel Core Ultra 5 225 is a 10-core, 10-thread processor based on the Arrow Lake-S architecture, manufactured on a 3 nm process by TSMC. It has a base clock of 3.30 GHz and a boost clock of 4.90 GHz, with 20 MB of shared L3 cache. The CPU's single-thread performance is particularly strong, as evidenced by its Passmark single-thread score of 4412 and its Cinebench R23 single-core score of 3655. These scores indicate that the processor can handle Fivem's often CPU-intensive multiplayer logic, which frequently relies on single-threaded performance.

The CPU's multi-threaded capabilities are also respectable, with a Cinebench R23 multi-core score of 25891 and a Passmark multithread score of 30459. While Fivem does not always scale well with multiple cores, the 10-core design ensures that background tasks and other system processes do not interfere with game performance. The processor's 85th percentile ranking among all CPUs, with an average benchmark score of 36938, places it in the upper echelon of desktop processors.

The data shows that the Core Ultra 5 225 is not the primary bottleneck in most scenarios. At 1080p Low, the system achieves 196 FPS, which is a high frame rate that suggests the CPU is capable of feeding the GPU with enough data. However, at 1080p Ultra, the frame rate drops to 96 FPS, which is a reduction of 100 FPS from the Low preset. This indicates that even at 1080p, the GPU becomes a limiting factor as settings increase, and the CPU's strong single-thread performance is sufficient to avoid becoming the primary constraint.

Settings Recommendations

For gamers seeking the best balance between visual quality and performance, the 2560x1440 resolution with High settings appears to be the sweet spot for this configuration. This combination produces an average of 81 FPS, which is smooth and responsive while still providing a high level of graphical detail. The 1440p Medium preset offers a higher frame rate of 102 FPS, making it the better choice for competitive play where frame rate is prioritized over visual fidelity.

At 1920x1080, the system is powerful enough to handle the Ultra preset at 96 FPS, making this the recommended settings for gamers who prioritize maximum visual quality and have a high refresh rate monitor. The 1080p High preset at 124 FPS is also an excellent choice, offering a slight performance boost over Ultra with minimal visual differences. For esports-focused players, the 1080p Low preset at 196 FPS provides the highest possible frame rates, though it sacrifices significant graphical detail.

The 4K resolution is not recommended for this system, as even the Low preset at 72 FPS is below the 144 Hz refresh rate that many modern monitors support. However, for gamers with a 60 Hz 4K display, the Low preset at 72 FPS is playable, and the Medium preset at 56 FPS is a viable option if some frame rate can be sacrificed for better visuals. The Ultra preset at 4K should be avoided, as the 35 FPS average is below the threshold for smooth gameplay and would result in a poor experience.