Fivem

Fivem, the multiplayer modification platform built on Grand Theft Auto V, presents a unique performance profile in this benchmark analysis. With the AMD Ryzen 7 9700X paired with an NVIDIA GeForce RTX 3060 Ti, the measured data reveals a system that is heavily influenced by both resolution and graphical preset, with the CPU demonstrating significant headroom across the board. This combination, ranked 1287 out of 1792 tested combos, shows that the RTX 3060 Ti is the primary bottleneck in this pairing, especially as resolution and settings scale upward.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data shows a clear and predictable pattern of performance degradation as resolution increases, but the rate of decline is telling. At the "High" preset, the system delivers 99.8 FPS at 1920x1080, dropping to 64.4 FPS at 2560x1440, and further to 37.7 FPS at 3840x2160. This represents a 35.5% reduction in performance from 1080p to 1440p, and a 62.2% reduction from 1080p to 4K. This steep decline is the classic signature of a GPU-bound scenario, where the rendering resolution places an increasing load on the graphics card's pixel and texture processing capabilities.

The drop from 1440p to 4K is particularly steep, with the "High" preset losing 26.7 FPS. This suggests that the RTX 3060 Ti, with its 8 GB of GDDR6 memory and 256-bit bus, is being pushed to its limits at the higher resolution. The data implies that the 4K "High" setting is not a viable target for this combo, as the average FPS of 37.7 falls below the threshold for smooth, responsive gameplay in a multiplayer environment. The scaling behavior indicates that Fivem's performance at 4K is almost entirely dependent on the GPU's ability to fill pixels, and the RTX 3060 Ti simply lacks the raw throughput to maintain high frame rates.

The scaling pattern also reveals that the CPU is not a limiting factor in this resolution range. If the Ryzen 7 9700X were the bottleneck, the FPS would remain relatively flat across resolutions, as the CPU's workload would be the primary constraint. Instead, the consistent and significant FPS drops with each resolution increase confirm that the GPU is the component determining the performance ceiling. This is a typical finding for a mid-range GPU like the RTX 3060 Ti, which is better suited for 1080p and 1440p gaming than for 4K.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 9700X is a formidable processor, featuring 8 cores and 16 threads based on the Zen 5 architecture. Its base clock of 3.80 GHz and boost clock of 5.50 GHz are high figures that contribute to strong single-threaded performance, as evidenced by its 3dmark_single_thread score of 1280. In a game like Fivem, which is known for its complex server-side scripting and physics simulation, the CPU's ability to process these tasks quickly is crucial. The data suggests that the 9700X has ample processing power to feed the RTX 3060 Ti, as the FPS scaling is clearly tied to resolution rather than CPU load.

The benchmark results for the CPU support this interpretation. The Cinebench R23 multicore score of 31588 and single-core score of 4459 indicate a processor that excels in both multi-threaded and single-threaded workloads. The Passmark multithread score of 37161 and single-thread score of 4654 further reinforce this. While Fivem may not fully utilize all 16 threads, the high single-core performance ensures that the main game thread, which handles most of the simulation logic, is not a bottleneck. The CPU's percentile ranking of 89 versus all CPUs also positions it as a high-tier processor, far exceeding the demands of this game.

The 32 MB of shared L3 cache is another factor that likely aids performance in Fivem's open-world environment. This large cache can store frequently accessed game data, reducing the latency for the CPU to retrieve information. This is particularly beneficial in a multiplayer setting where the game world is dynamic and constantly updating. The data indicates that the CPU's role is to provide a stable, high-performance foundation that allows the GPU to operate at its full potential, and the measured FPS results show that it does this effectively across all tested resolutions.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 3060 Ti is the clear performance limiter in this configuration. With a boost clock of 1665 MHz and 4864 shading units, it offers respectable compute power, but its 8 GB of GDDR6 memory and 448.0 GB/s bandwidth become a constraint at higher resolutions and quality settings. The measured FPS data shows that the GPU's performance is highly sensitive to both resolution and preset, confirming that it is the primary component responsible for the frame rate output.

At 1920x1080, the RTX 3060 Ti performs admirably, delivering 157.9 FPS on "Low" settings and 79.2 FPS on "Ultra". This is within the expected range for this GPU, which is a popular choice for high-refresh-rate 1080p gaming. The data shows that even at "Ultra" settings, the GPU can maintain a playable frame rate at this resolution. However, the performance drops significantly at 2560x1440, where the "Ultra" preset yields only 51.5 FPS. This suggests that the GPU is starting to run out of pixel-pushing capability, and the 8 GB VRAM may also be a limiting factor as texture sizes and memory usage increase.

At 3840x2160, the GPU is clearly overwhelmed. The "Ultra" preset produces a barely playable 27.9 FPS, and even "Low" settings only achieve 56 FPS. This indicates that the RTX 3060 Ti is not designed for 4K gaming in Fivem, which is a demanding title due to its large draw distances and detailed environments. The Passmark G3D score of 20349 and 3dmark_steel_nomad_dx12 score of 2626 place this GPU in the mid-range tier, and its performance in this game aligns with that classification. The data makes it clear that for the best experience, this combo should be used at 1080p or 1440p, where the GPU can deliver high frame rates without being constrained by VRAM or raw compute limits.

FAQ

Q: What is the highest average FPS achieved by this combo at 1080p?

A: The highest average FPS at 1920x1080 is 157.9, achieved with the "Low" preset.

Q: Is this CPU-GPU combination capable of 4K gaming in Fivem?

A: The data shows that 4K performance is limited. The best result at 3840x2160 is 56 FPS on "Low" settings, while "High" and "Ultra" presets yield 37.7 and 27.9 FPS respectively, indicating poor playability at higher settings.

Q: How does the CPU's single-thread performance compare to its multi-thread performance?

A: The Ryzen 7 9700X scores 4459 in Cinebench R23 single-core and 31588 in multi-core, showing strong performance in both areas. Its Passmark single-thread score is 4654, and multithread score is 37161.

Q: What is the performance difference between "Low" and "Ultra" presets at 1440p?

A: At 2560x1440, the "Low" preset averages 105.7 FPS, while the "Ultra" preset averages 51.5 FPS, representing a performance drop of 54.2 FPS.

Q: What is the combo's overall ranking among tested configurations?

A: The combo ranks 1287 out of 1792 tested combos in Fivem.

Q: What is the GPU's memory bandwidth and size?

A: The RTX 3060 Ti has 8 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 448.0 GB/s.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured data provides a clear picture of performance across all settings. At 1920x1080, the system averages 157.9 FPS on "Low", 127.4 FPS on "Medium", 99.8 FPS on "High", and 79.2 FPS on "Ultra". This shows a steady decline of roughly 20-30 FPS with each step up in quality. The range between "Low" and "Ultra" is 78.7 FPS, indicating that the GPU has significant headroom at this resolution to handle increased graphical fidelity.

At 2560x1440, the performance drops are more pronounced. The "Low" preset averages 105.7 FPS, which is still quite smooth. The "Medium" preset drops to 81.6 FPS, and "High" to 64.4 FPS. The "Ultra" preset is the most demanding, yielding only 51.5 FPS. The performance gap between "Low" and "Ultra" at this resolution is 54.2 FPS. This data indicates that 1440p is a viable resolution for this combo, but users may need to compromise on settings to maintain higher frame rates.

At 3840x2160, the GPU is clearly overburdened. The "Low" preset averages 56 FPS, which is playable but not ideal for a competitive multiplayer game. The "Medium" preset drops to 45.8 FPS, "High" to 37.7 FPS, and "Ultra" to 27.9 FPS. The performance difference between "Low" and "Ultra" is 28.1 FPS. This data strongly suggests that 4K gaming is not recommended for this combination, as even the lowest settings fail to deliver a consistently smooth experience. The RTX 3060 Ti's 8 GB VRAM and compute capabilities are insufficient for the demands of Fivem at this resolution.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the optimal settings depend heavily on the target resolution and desired frame rate. For 1080p gaming, the "High" preset offers a strong balance, delivering 99.8 FPS. This is well above the 60 FPS threshold and provides a significantly better visual experience than "Medium" or "Low" settings. For users with high-refresh-rate monitors, the "Low" preset at 157.9 FPS would be preferable, but the "High" preset offers a more immersive experience without a major performance hit.

At 1440p, the "Medium" preset is the best recommendation, averaging 81.6 FPS. This provides a smooth gameplay experience while offering better visual quality than "Low". The "High" preset at 64.4 FPS is also playable, but the drop below 70 FPS may be noticeable in fast-paced situations. The "Ultra" preset at 51.5 FPS is not recommended for competitive play, as the frame rate is too low for consistent responsiveness.

For 4K, the data indicates that no preset provides an ideal experience. The "Low" preset at 56 FPS is the only option that approaches playability, but it still suffers from occasional dips. The "Medium" preset at 45.8 FPS and below is not recommended. The best course of action for this combo is to stick with 1080p or 1440p. At 1080p, "High" is the sweet spot, while at 1440p, "Medium" is the best choice. These settings provide the highest frame rates that still maintain a good level of visual fidelity, according to the measured data.

How This Combo Ranks — use comboRankInGame vs other tested combos

The AMD Ryzen 7 9700X and NVIDIA GeForce RTX 3060 Ti combination ranks 1287 out of 1792 tested combos in Fivem. This places it in the lower-middle tier of all tested systems, which is a significant finding given the strength of the CPU. The ranking suggests that the GPU is holding the system back, as the Ryzen 7 9700X is a high-end processor that would pair better with a more powerful graphics card. The CPU's percentile rank of 89 versus all CPUs indicates it is a top-tier processor, while the GPU's percentile rank of 69 versus all GPUs is more modest.

The nearest rivals for the CPU, such as the Intel Core i5-14500HX with a deltaPct of 0.2%, show that the 9700X is competitively positioned in terms of raw processing power. However, the GPU's nearest rivals, including the AMD Radeon RX 6700M with a deltaPct of -0.2%, are all similarly performing cards. This data implies that the combo's ranking is not due to a weak CPU, but rather to the GPU's inability to keep up with the demands of Fivem at higher resolutions. The rank of 1287 out of 1792 suggests that there are many other tested combinations that offer better FPS performance in this game, mostly those with higher-end GPUs.

This ranking highlights a key insight: for a CPU-intensive game like Fivem, the choice of GPU is paramount. The Ryzen 7 9700X provides all the necessary processing power, but the RTX 3060 Ti limits the overall system to mid-range performance. The data suggests that users with this CPU should consider a more powerful GPU to unlock its full potential in Fivem, as the current pairing leaves significant performance on the table. The benchmark results indicate that this combo is best suited for 1080p gaming, where the GPU can keep up with the CPU's output, and its low rank in the overall database reflects this limitation.