Fivem
This combination offers playable performance with an average of 30 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 11 | 14 | 18 | 22 |
| 1440p QHD | 20 | 26 | 32 | 41 |
| 1080p Full HD | 30 | 39 | 49 | 62 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Fivem with Intel Core Ultra 5 225 + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
Fivem is a notoriously demanding multiplayer modification for Grand Theft Auto V, and the combination of the Intel Core Ultra 5 225 and the NVIDIA GeForce GTX 1050 Ti lands near the bottom of the performance stack. With a combo rank of 2962 out of 3005 tested configurations, this pairing is positioned for the absolute minimum playable settings, and even then, the experience is heavily constrained by the GPU. The data shows a system that is fundamentally limited by its graphics card across every resolution, though the CPU's architecture still plays a significant role in determining the final frame rates.
Resolution Scaling
The measured FPS data reveals a steep and predictable decline as resolution increases, confirming that the GTX 1050 Ti is the primary bottleneck in this configuration. At 1920x1080 with Low settings, the system achieves an average of 62 FPS, which is the only row in the entire dataset that reaches a truly playable threshold. Moving to 2560x1440 at the same Low preset drops the average to 41 FPS, a reduction of roughly 34% from the 1080p figure. At 3840x2160, the Low preset falls further to just 22 FPS, illustrating a severe performance cliff that makes 4K gaming untenable for this hardware.
The scaling pattern across the Medium settings tells a similar story, with averages of 49 FPS at 1080p, 32 FPS at 1440p, and 18 FPS at 4K. The gap between 1080p and 1440p is about 35%, while the drop from 1440p to 4K is approximately 44%, indicating that the GPU is becoming increasingly saturated at higher pixel counts. The High preset shows the same trend: 39 FPS at 1080p, 26 FPS at 1440p, and 14 FPS at 4K. Even at the lowest resolution tested, the High preset cannot maintain 60 FPS, which strongly suggests that the GTX 1050 Ti's 4 GB of GDDR5 memory and 2.138 TFLOPS of FP32 compute are simply insufficient for Fivem's dense multiplayer environments.
Ultra settings are effectively a slideshow at every resolution, with averages of 30 FPS at 1080p, 20 FPS at 1440p, and just 11 FPS at 4K. The data indicates that the scaling from Low to Ultra at 1080p costs more than half the frame rate, from 62 FPS down to 30 FPS. This severe penalty suggests that the GPU's memory bandwidth of 112.1 GB/s is a critical constraint, as higher settings increase texture detail and draw distance, directly impacting VRAM usage and memory throughput.
CPU Role
The Intel Core Ultra 5 225 is a 10-core, 10-thread processor based on the Arrow Lake architecture, built on a 3 nm process node by TSMC. It has a base clock of 3.30 GHz and a boost clock of 4.90 GHz, with 20 MB of shared L3 cache. In synthetic benchmarks, the CPU achieves a Cinebench R23 multicore score of 25891 and a single-core score of 3655, which places it in the 85th percentile of all CPUs. However, its nearest rivals in average benchmark score include the AMD Ryzen 5 5600F and the AMD Ryzen 5 5500X3D, with delta percentages of 0 and -0.2 respectively, meaning the Ultra 5 225 is essentially performance-equivalent to those parts in general compute tasks.
In the context of Fivem, the CPU's role is less about raw multicore throughput and more about single-thread performance and maintaining a stable frame pacing in a heavily scripted multiplayer environment. The PassMark single-thread score of 4412 is respectable, and the boost clock of 4.90 GHz should provide adequate responsiveness for the game's simulation logic. However, the data shows that at 1080p Low, the system reaches only 62 FPS, which is below the CPU's theoretical capability. This implies that even at the lowest settings, the GPU is already limiting performance, and the CPU is not the primary constraint in this pairing.
The TDP of 65 W and the fact that the processor has 10 threads rather than 20 (as seen in many competitors) suggests that heavily multithreaded titles might not scale perfectly, but Fivem is known to be less dependent on core count and more on per-core speed. The benchmark results show a PassMark multithread score of 30459, which is strong, but the game's engine likely does not fully utilize all 10 threads. The data indicates that the CPU is capable of higher frame rates than what the GPU allows, as evidenced by the fact that the GPU's percentile ranking is only 25, while the CPU sits at 85.
GPU Role
The NVIDIA GeForce GTX 1050 Ti is the definitive limiting factor in this configuration. With a 14 nm Pascal architecture, 768 shading units, and a boost clock of 1392 MHz, the GPU delivers a modest FP32 throughput of 2.138 TFLOPS. Its 4 GB of GDDR5 memory on a 128-bit bus provides 112.1 GB/s of bandwidth, which is a severe bottleneck for modern games, especially at higher resolutions and settings. The GPU's average benchmark score of 4193 places it in the 25th percentile of all GPUs, and its nearest rivals include the AMD Radeon R5 M330 and the NVIDIA Quadro K2100M, both of which are significantly less capable than the 1050 Ti in gaming workloads.
The measured FPS data directly reflects this GPU's limitations. At 1080p Ultra, the average FPS is just 30, and at 4K Ultra, it collapses to 11 FPS. The GPU's 4 GB VRAM is likely exhausted at Ultra settings, causing texture swapping and stutter, even though the minimum FPS values are only recorded for Medium settings in the dataset. The GPU's DirectX 12 PassMark score of 26 is particularly low, which may indicate poor optimization for modern APIs, though Fivem typically runs on DirectX 11, where the score is slightly better at 45.
The GTX 1050 Ti's 75 W TDP and lack of any power connectors suggest it is a low-power part, but this does not compensate for its architectural age. The pixel rate of 44.54 GPixel/s and texture rate of 66.82 GTexel/s are insufficient for 1440p gaming, as shown by the 41 FPS average at Low settings in that resolution. The data clearly shows that this GPU is only suited for 1080p gaming at the lowest presets, and even then, the experience may not be consistently smooth in busy Fivem servers.
Settings Recommendations
Based on the measured rows, the only viable configuration for this hardware is 1920x1080 with the Low preset, which yields an average of 62 FPS. This is the sole setting combination that approaches the 60 FPS target, and it does so without any recorded minimum FPS, suggesting that frame drops could dip below that average. The Medium preset at 1080p offers 49 FPS on average, with a recorded minimum of 41 FPS and a maximum of 56 FPS, which is still playable but may feel less fluid in high-action scenarios. For a balance between visual fidelity and performance, the Medium preset at 1080p is the recommended choice, as it provides a 27% improvement in average FPS over High while maintaining a minimum above 40 FPS.
At 1440p, no preset achieves a playable average. The Low preset maxes out at 41 FPS, but this is likely to feel stuttery in multiplayer. The High preset at 1080p, which averages 39 FPS, is actually better than the Low preset at 1440p, indicating that users should prioritize resolution reduction over settings reduction for this hardware. The Ultra preset should be avoided entirely, as it drops below 30 FPS even at 1080p, making the game feel unresponsive. The data suggests that the GPU's VRAM and bandwidth are the key constraints, so lowering texture quality and draw distance (as seen in the Low preset) is the most effective way to gain performance.
For users who insist on 1440p, the Low preset is the only option, but the 41 FPS average is marginal. The Medium preset at 1440p falls to 32 FPS, which is below the threshold for smooth gameplay. The 4K resolution is not viable under any settings, with the highest average being 22 FPS at Low. The recommendation is to stick to 1080p and choose between Low for maximum frame rate or Medium for a better visual experience, accepting that the system will not consistently hit 60 FPS under load.
FAQ
Q: Can this system run Fivem at 1080p with playable frame rates?
A: Yes, but only at Low settings, where it averages 62 FPS. The Medium preset averages 49 FPS with a minimum of 41 FPS, which is also playable, but the High and Ultra presets drop to 39 FPS and 30 FPS respectively, making them less suitable for fast-paced gameplay.
Q: Is the CPU or GPU the bottleneck in this configuration?
A: The GPU is the clear bottleneck. The CPU scores in the 85th percentile of all processors, while the GPU is in the 25th percentile. The frame rates drop significantly with resolution increases, which is characteristic of GPU limitations, and the CPU's single-thread performance is sufficient for the game's logic.
Q: What is the best settings preset for this hardware?
A: The 1920x1080 Medium preset offers the best balance, with an average of 49 FPS and a minimum of 41 FPS. If a higher frame rate is desired, the Low preset provides 62 FPS but with reduced visual quality. The Ultra preset is not recommended as it only achieves 30 FPS at 1080p.
Q: How does the GTX 1050 Ti compare to its nearest rivals in this game?
A: The GTX 1050 Ti has an average benchmark score of 4193, which is 0.6% higher than the AMD Radeon R5 M330 and 1% higher than the NVIDIA Quadro K2100M. It is 1.1% lower than the NVIDIA Quadro K3000M and 1.8% lower than the AMD Radeon Vega 3, so it sits in a narrow performance band with those parts.
Q: Is 4K gaming possible with this setup?
A: No. The highest average FPS at 3840x2160 is 22 FPS on Low settings, which is far below playable levels. The Medium preset drops to 18 FPS, and Ultra falls to 11 FPS, making 4K resolution unusable for Fivem.
Q: What is the role of the CPU's 10 cores in Fivem?
A: Fivem is more dependent on single-thread performance than multicore scaling. The Ultra 5 225's boost clock of 4.90 GHz and single-thread score of 3655 in Cinebench R23 indicate it can handle the game's simulation, but the GPU prevents the CPU from being fully utilized, as seen in the 62 FPS ceiling at 1080p Low.
Measured FPS Breakdown
The following data is taken directly from the measured FPS rows for the Intel Core Ultra 5 225 and NVIDIA GeForce GTX 1050 Ti combination.
1920x1080:
- Low: Average 62 FPS
- Medium: Average 49 FPS, Minimum 41 FPS, Maximum 56 FPS
- High: Average 39 FPS
- Ultra: Average 30 FPS
2560x1440:
- Low: Average 41 FPS
- Medium: Average 32 FPS, Minimum 27 FPS, Maximum 37 FPS
- High: Average 26 FPS
- Ultra: Average 20 FPS
3840x2160:
- Low: Average 22 FPS
- Medium: Average 18 FPS, Minimum 15 FPS, Maximum 20 FPS
- High: Average 14 FPS
- Ultra: Average 11 FPS
The data shows a consistent pattern where each resolution step up reduces the average FPS by roughly 30-40% across all settings. The only setting with recorded minimum and maximum values is Medium, which provides the most stable frame pacing in the dataset. The 1080p Low preset is the only row that exceeds 60 FPS on average, and it does so without any recorded minimum, indicating that frame drops may occur but are not captured in the data. The 4K results are uniformly below 25 FPS, confirming that the GTX 1050 Ti's 4 GB VRAM and 112.1 GB/s bandwidth are inadequate for that resolution in Fivem.
Hardware Specifications
Intel Core Ultra 5 225
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 5 225 + NVIDIA GeForce GTX 1050 Ti in Fivem
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 22.0 |
| 3840x2160 | Medium | 18.0 |
| 3840x2160 | High | 14.0 |
| 3840x2160 | Ultra | 11.0 |
| 2560x1440 | Low | 41.0 |
| 2560x1440 | Medium | 32.0 |
| 2560x1440 | High | 26.0 |
| 2560x1440 | Ultra | 20.0 |
| 1920x1080 | Low | 62.0 |
| 1920x1080 | Medium | 49.0 |
| 1920x1080 | High | 39.0 |
| 1920x1080 | Ultra | 30.0 |
Fivem with iUltra 5 225 + Other GPUs
See how Fivem performs with the same CPU but different graphics cards.
Fivem with GTX 1050 Ti + Other CPUs
See how Fivem performs with the same GPU but different processors.
Other Games with iUltra 5 225 + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.