Fivem

How This Combo Ranks

The AMD Ryzen 7 7700X paired with the NVIDIA GeForce GTX 1050 Ti ranks 1762nd out of 1792 tested combinations in Fivem. This places the combo in the bottom 2% of all tested configurations, indicating a severe performance bottleneck that makes the pairing unsuitable for smooth gameplay in this title. The ranking reflects the substantial imbalance between the two components; the CPU is a high-end desktop processor with strong synthetic benchmarks, while the GPU is an entry-level, end-of-life part that limits the overall frame output.

The data shows a clear picture of constraint. The Ryzen 7 7700X sits in the 89th percentile among all CPUs, with an average benchmark score of 34313. Its nearest rivals include the Intel Core i5-13500 (0.4% behind), the Intel Core i7-12800HX (0.5% behind), and the AMD EPYC 4244P (0.8% ahead). These are all modern, capable processors, and the Ryzen's performance is consistent with its high-end positioning. In contrast, the GTX 1050 Ti rests in the 30th percentile among all GPUs, with an average benchmark score of 5316. Its closest competitors are the NVIDIA GeForce 930A (0% delta), the NVIDIA GeForce 940M (0.4% ahead), and the AMD Radeon R7 240 (0.7% ahead). The delta percentages between the GPU and its rivals are negligible, confirming that the 1050 Ti is effectively at the bottom of the performance spectrum.

The result is a configuration where the CPU's potential is almost entirely unrealized in Fivem. The measured FPS data confirms that the GPU is the limiting factor across all resolutions and settings. This is not a case of a mediocre pairing; it is a fundamental mismatch where the GPU's output ceiling is far below what the CPU can feed. For any user considering this combination, the data indicates that the experience will be dictated by the GPU's limitations, making the high-end CPU a wasted investment for this specific game.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the primary constraint in this configuration. Its memory configuration is particularly limiting: it has 4 GB of GDDR5 memory on a 128-bit bus, yielding a bandwidth of 112.1 GB/s. In a multiplayer title like Fivem, where large textures and dynamic environments are common, the 4 GB capacity is insufficient for high detail levels, especially at higher resolutions. The GPU's clocks are also modest: a base clock of 1291 MHz and a boost clock of 1392 MHz, with memory operating at 1752 MHz (7 Gbps effective).

The GPU's compute capabilities are equally restricted. It offers 768 shading units, 48 texture mapping units, and 32 raster output units. The pixel rate is 44.54 GPixel/s, and the texture rate is 66.82 GTexel/s. The FP32 performance is 2.138 TFLOPS, which is very low by modern standards. The GPU supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4, but its raw throughput is insufficient for demanding workloads. The TDP is 75 W, and it requires no external power connectors, with a suggested PSU of 250 W, which indicates its low-power, entry-level design.

In Fivem, the GPU's role is to render the game world, and its limitations are directly reflected in the measured FPS. At every resolution, the average frame rate is low, even at the lowest settings. The data shows that the GPU is the bottleneck, as the CPU has ample headroom. For example, at 1920x1080 with Low settings, the average FPS is 60.3, which is the highest recorded for this combo. This is likely the practical ceiling for the GPU, and any increase in settings or resolution quickly degrades performance. The GPU's 4 GB VRAM is a significant issue, as it can cause texture streaming problems and stuttering in a game like Fivem, which is known for its modded content and large maps.

FAQ

Q: What is the overall rank of this combination in Fivem?

A: This combo ranks 1762nd out of 1792 tested combinations in Fivem, placing it in the bottom 2% of all tested configurations.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The Ryzen 7 7700X has an average benchmark score of 34313, which is 0.4% ahead of the Intel Core i5-13500, 0.5% ahead of the Intel Core i7-12800HX, and 0.8% behind the AMD EPYC 4244P.

Q: How does the GPU compare to its nearest rivals in synthetic benchmarks?

A: The GTX 1050 Ti has an average benchmark score of 5316, which is essentially tied with the NVIDIA GeForce 930A (0% delta), 0.4% ahead of the NVIDIA GeForce 940M, and 0.7% ahead of the AMD Radeon R7 240.

Q: What is the highest average FPS recorded for this combo, and at what settings?

A: The highest average FPS is 60.3, recorded at 1920x1080 with Low settings.

Q: What is the lowest average FPS recorded for this combo, and at what settings?

A: The lowest average FPS is 10.4, recorded at 3840x2160 with Ultra settings.

Q: What is the GPU's memory configuration and how does it impact performance?

A: The GPU has 4 GB of GDDR5 memory on a 128-bit bus with 112.1 GB/s bandwidth. This limited capacity and bandwidth are significant factors in the low performance, particularly at higher resolutions and detail settings.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across three resolutions and four settings levels. The data confirms that the combo is playable only at the lowest settings and resolution, with performance degrading rapidly as demands increase.

At 1920x1080, the average FPS ranges from 60.3 at Low settings to 32.4 at Ultra settings. The breakdown is as follows: Low yields 60.3 FPS, Medium yields 46.1 FPS, High yields 41 FPS, and Ultra yields 32.4 FPS. This is the only resolution where the combo approaches a playable frame rate, and only at Low settings. The drop from Low to Ultra is 27.9 FPS, a 46% reduction, which shows that even at the lowest resolution, the GPU struggles with higher detail levels.

At 2560x1440, the average FPS drops significantly. Low settings produce 38.3 FPS, Medium produces 33.9 FPS, High produces 28 FPS, and Ultra produces 22.7 FPS. The drop from Low to Ultra is 15.6 FPS, a 41% reduction. None of these frame rates are ideal for smooth gameplay, and the lowest setting is barely acceptable for a single-player experience, let alone a multiplayer one.

At 3840x2160, performance is critically low. Low settings produce 22.5 FPS, Medium produces 19 FPS, High produces 13.7 FPS, and Ultra produces 10.4 FPS. The drop from Low to Ultra is 12.1 FPS, a 54% reduction. These frame rates are effectively unplayable, and the data shows that the GTX 1050 Ti is not capable of handling 4K resolution in Fivem under any circumstances. The minimum and maximum FPS values are not provided, but the averages alone are sufficient to indicate a poor experience.

Resolution Scaling

The data shows a clear and predictable pattern of performance degradation as resolution increases. From 1920x1080 to 2560x1440, the average FPS across all settings drops by roughly 30-40%. For example, at Low settings, the FPS drops from 60.3 to 38.3, a 36% reduction. At Ultra settings, it drops from 32.4 to 22.7, a 30% reduction. This indicates that the GPU is the primary limiting factor, as the resolution increase directly increases the pixel workload.

From 2560x1440 to 3840x2160, the performance drop is even more pronounced. At Low settings, the FPS drops from 38.3 to 22.5, a 41% reduction. At Ultra settings, it drops from 22.7 to 10.4, a 54% reduction. The larger drop at Ultra settings highlights the GPU's inability to handle the combined load of high resolution and high detail. The 4 GB VRAM is likely a major contributor here, as the larger frame buffer requirements at 4K can exceed the available memory, causing severe performance penalties.

The scaling pattern strongly indicates that the GTX 1050 Ti is the bottleneck. The Ryzen 7 7700X has more than enough processing power to handle the game's logic and physics, but it is starved of frames by the GPU. If the CPU were the limiting factor, we would expect to see a more consistent FPS across resolutions, as the CPU workload would not increase significantly with resolution. Instead, the FPS drops almost linearly with the increase in pixel count, which is a classic sign of GPU-bound performance. To achieve higher frame rates, the GPU would need to be upgraded, as the current part cannot deliver playable performance beyond 1080p Low settings.