Fivem

The Intel Core i3-12100F paired with the Intel Arc B570 delivers a highly variable experience in Fivem, heavily dependent on the resolution and quality preset selected. The measured data reveals that this combination is capable of high refresh rates at 1080p but struggles to maintain playable frame rates at 4K, indicating a clear performance bottleneck that shifts depending on the workload.

Resolution Scaling

The FPS drop from 1080p to 4K is substantial and reveals the changing nature of the bottleneck across resolutions. At the Low preset, the average frame rate falls from 136 FPS at 1920x1080 to 89 FPS at 2560x1440, and finally to 50 FPS at 3840x2160. This represents a 63% reduction in performance from the lowest to the highest resolution tested. The scaling pattern shows that the system is heavily CPU-limited at 1080p, as the frame rate at Low settings is extremely high, suggesting the GPU can render frames much faster than the processor can feed it.

Moving to the High preset, the frame rate drops from 86 FPS at 1080p to 56 FPS at 1440p and then to 31 FPS at 4K. The percentage drop from 1080p to 1440p is 35%, while from 1440p to 4K it is another 45%. This steeper decline at higher resolutions indicates the GPU is becoming the primary limiting factor as the pixel count increases, with the Arc B570's rendering capabilities being taxed by the higher resolution workloads.

The Medium preset shows the most balanced scaling behavior. At 1920x1080, the average is 107 FPS, which drops to 71 FPS at 2560x1440 and then to 39 FPS at 3840x2160. The frame time consistency, as evidenced by the min and max values at Medium settings, also degrades with resolution. At 1080p, the frame rate ranges from 91 to 123 FPS, a 32 FPS spread. At 1440p, the range is 60 to 81 FPS, a 21 FPS spread. At 4K, the range tightens to 33 to 45 FPS, an 12 FPS spread. This decreasing variance suggests that at higher resolutions, the workload becomes more consistent, but the overall performance is significantly lower.

The Ultra preset delivers the lowest frame rates across all resolutions, with 67 FPS at 1080p, 44 FPS at 1440p, and just 24 FPS at 4K. The decline from 1440p to 4K is a 45% drop, which is similar to the High preset's scaling. This consistent pattern across presets indicates that the GPU's rendering throughput is the dominant constraint at 4K, regardless of the quality settings chosen.

The data suggests that at 1080p, the system is primarily CPU-bound, as evidenced by the high frame rates even at Low settings. The Core i3-12100F's four cores and eight threads are likely the limiting factor here, as the GPU has headroom to render more frames if the CPU could provide them. As resolution increases, the GPU becomes the bottleneck, with the Arc B570's 10 GB of VRAM and 160-bit memory bus being insufficient to maintain high frame rates at 4K.

CPU Role

The Intel Core i3-12100F is a 4-core, 8-thread processor based on the Alder Lake architecture, with a base clock of 3.30 GHz and a boost clock of 4.30 GHz. Its benchmark scores indicate a strong single-threaded performance, with a 3dmark single-thread score of 893 and a Passmark single-thread score of 3444. The multi-threaded results are less impressive, with a 3dmark max threads score of 4023 and a Cinebench R23 multi-core score of 11860.

In Fivem, which is a multiplayer modification for GTA V, the CPU's single-thread performance is crucial for game logic and physics calculations. The benchmark data shows that at 1080p Low settings, the system achieves 136 FPS, which is the highest measured result. This high frame rate indicates that the CPU is capable of feeding the GPU with enough data to maintain high performance, but the fact that the frame rate increases from 67 FPS at Ultra to 136 FPS at Low suggests that the GPU is not the primary constraint at this resolution.

The Core i3-12100F's percentile ranking of 68 among all CPUs places it in the upper-middle tier of processors. Its nearest rivals, such as the Intel Core i5-9500 with a deltaPct of 0.3 and the Intel Core 5 120UL with a deltaPct of -0.7, show that the i3-12100F is competitive with older mainstream processors. However, its four cores may struggle in Fivem's multiplayer environments, where many players and entities can create a heavy CPU load.

The CPU's L3 cache of 12 MB shared is moderate by modern standards, and its support for both DDR4 and DDR5 memory gives it flexibility. The lack of an integrated GPU means the system relies entirely on the discrete Arc B570 for graphics output. The processor's 58 W TDP is low, making it an efficient choice for budget systems, but the benchmark results in Fivem show that it can become a bottleneck at lower resolutions where the GPU has more headroom.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows that 1920x1080 provides the best balance of performance and visual quality. At Medium settings, the system achieves 107 FPS average with a minimum of 91 FPS, which is smooth for most gameplay. At 2560x1440, the Medium preset drops to 71 FPS, while 4K falls to 39 FPS, making 1080p the most practical choice for high refresh rate play.

Q: How does the Arc B570 compare to its nearest rivals in synthetic benchmarks?

A: The Arc B570 has an average benchmark score of 20556, which places it 0.1% ahead of the NVIDIA GeForce RTX 3070 Mobile and 0.1% behind the Intel Arc A750. Its Passmark G3D score is 14195, and it achieves a 3dmark Steel Nomad DX12 score of 2649, indicating competitive performance in its class.

Q: Is the Core i3-12100F a bottleneck for the Arc B570 in Fivem?

A: At 1080p, the system reaches 136 FPS at Low settings, which is significantly higher than the 67 FPS at Ultra. This performance gap suggests the CPU is limiting the GPU at lower quality settings, as the Arc B570 could likely render more frames if the processor could keep up. At 4K, the GPU becomes the limiting factor, with frame rates dropping to 24 FPS at Ultra.

Q: What is the frame time consistency at different settings?

A: The Medium preset provides the most complete data. At 1080p, the frame rate ranges from 91 to 123 FPS, a 32 FPS spread. At 1440p, the range is 60 to 81 FPS, and at 4K, it is 33 to 45 FPS. The decreasing spread at higher resolutions indicates more consistent frame pacing, though at the cost of lower overall performance.

Q: How does the CPU's multi-threaded performance affect Fivem?

A: The Core i3-12100F scores 11860 in Cinebench R23 multi-core and 4023 in 3dmark max threads. These scores indicate moderate multi-threading capability, which is relevant for Fivem's multiplayer servers where multiple players and scripts can create parallel workloads. However, the 4-core design may limit performance in heavily populated servers.

Q: What is the GPU's memory bandwidth and how does it impact 4K performance?

A: The Arc B570 has 10 GB of GDDR6 memory on a 160-bit bus, providing 380.0 GB/s of bandwidth. At 4K, the system achieves only 24 FPS at Ultra settings, suggesting that the memory bandwidth is insufficient for the high-resolution texture and geometry demands, making 4K gaming impractical for this combo.

How This Combo Ranks

The combination of the Intel Core i3-12100F and Intel Arc B570 ranks 2396 out of 3005 tested combos in Fivem. This places it in the lower 20% of all tested configurations, indicating that it is not a high-performing combination for this specific game. The rank reflects the system's inability to deliver high frame rates at higher resolutions, particularly at 4K where the average FPS falls below 30 across all settings except Low.

The CPU's percentile ranking of 68 among all CPUs and the GPU's percentile ranking of 65 among all GPUs suggest that both components are mid-tier in their respective categories. However, the combination of these two mid-tier components does not produce a synergistic result in Fivem, as the rank of 2396 out of 3005 demonstrates. This suggests that Fivem is particularly demanding on the system, or that the specific characteristics of these components do not align well with the game's requirements.

The low rank is primarily driven by the 4K performance, where the system struggles to maintain playable frame rates. At 1080p, the system performs admirably, with the Low preset achieving 136 FPS. However, the overall ranking is likely weighted across all tested resolutions and settings, dragging down the combo's position. The rank of 2396 out of 3005 means that 609 combos perform worse, but the vast majority of tested systems deliver better results in Fivem.

Measured FPS Breakdown

At 1920x1080, the system delivers its best performance. The Low preset achieves an average of 136 FPS, which is the highest measured across all configurations. The High preset delivers 86 FPS, while Medium provides 107 FPS with a minimum of 91 FPS and a maximum of 123 FPS. The Ultra preset drops to 67 FPS, which is still playable but shows a significant performance penalty for the highest quality settings.

At 2560x1440, the frame rates decrease across all presets. The Low preset maintains a respectable 89 FPS, while High drops to 56 FPS. Medium delivers 71 FPS with a minimum of 60 FPS and a maximum of 81 FPS, which is playable but shows some frame time variance. The Ultra preset falls to 44 FPS, which is below the 60 FPS target for smooth gameplay.

At 3840x2160, the system struggles to maintain playable frame rates. The Low preset achieves 50 FPS, while Medium drops to 39 FPS with a minimum of 33 FPS and a maximum of 45 FPS. The High preset delivers only 31 FPS, and Ultra falls to 24 FPS. These frame rates are below the threshold for smooth gameplay, making 4K resolution impractical for this combo in Fivem.

The data shows a consistent pattern across all presets: the frame rate scales nearly linearly with resolution, indicating that the GPU is the primary bottleneck at higher resolutions. The difference between 1080p and 1440p is roughly 30-40%, while the difference between 1440p and 4K is another 40-50%, reflecting the increasing pixel count and its impact on the Arc B570's rendering capabilities.

Settings Recommendations

Based on the measured data, the Medium preset at 1920x1080 offers the best experience for this combo. It achieves 107 FPS average with a minimum of 91 FPS, ensuring smooth gameplay without the frame rate dips that could occur at lower settings. The 91 FPS minimum is comfortably above the 60 FPS threshold, providing a consistent experience. Compared to High, which delivers 86 FPS, Medium offers a 24% performance improvement while likely maintaining acceptable visual quality.

For users with 1440p monitors, the Low preset at 89 FPS is the only option that provides a consistently smooth experience. The Medium preset at 71 FPS is playable, but the 60 FPS minimum is close to the edge of what many players would consider acceptable. The High preset at 56 FPS and Ultra at 44 FPS are below the smoothness threshold, making them less desirable for competitive or fast-paced gameplay.

At 4K, none of the presets provide a fully playable experience. The Low preset at 50 FPS is the best option, but it may still feel less responsive than desired. The Medium preset at 39 FPS is borderline, while High at 31 FPS and Ultra at 24 FPS are not recommended for regular play. For this combo, 4K gaming in Fivem should be avoided unless the user is willing to accept significant compromises in visual quality.

The Ultra preset consistently delivers the lowest frame rates across all resolutions, with a 50% performance penalty compared to Medium at 1080p and 4K. Given the significant drop from 107 FPS at Medium to 67 FPS at Ultra, the additional visual fidelity is unlikely to justify the performance loss. The Medium preset offers the best balance of visual quality and performance, while Low provides a competitive advantage for players prioritizing frame rate.

GPU Role

The Intel Arc B570 is based on the Xe2-HPG architecture and manufactured on a 5 nm process at TSMC. It features 2304 shading units, 144 TMUs, and 80 ROPs, with a base and boost clock of 2500 MHz. The GPU has 10 GB of GDDR6 memory on a 160-bit bus, providing 380.0 GB/s of bandwidth. The memory clock runs at 2375 MHz, which translates to 19 Gbps effective.

The GPU's benchmark results show a Passmark G3D score of 14195 and a 3dmark Steel Nomad DX12 score of 2649. Its Geekbench Vulkan score of 96844 is notably higher than the OpenCL score of 83514, indicating strong Vulkan performance, which is relevant for Fivem's rendering engine. The GPU's average benchmark score of 20556 places it 0.1% ahead of the NVIDIA GeForce RTX 3070 Mobile and 0.1% behind the Intel Arc A750.

The Arc B570's role in Fivem becomes more significant at higher resolutions. At 1080p, the GPU is not the primary bottleneck, as evidenced by the high frame rates at Low settings. However, at 4K, the GPU's rendering capabilities are stretched to their limits, with the Ultra preset achieving only 24 FPS. The 10 GB of VRAM is sufficient for most games at 1080p and 1440p, but the 160-bit memory bus may limit bandwidth-intensive operations at 4K.

The GPU's FP32 performance of 11.52 TFLOPS and texture rate of 360.0 GTexel/s are moderate for its class, but the 200.0 GPixel/s pixel rate suggests that fill-rate-bound scenarios could be problematic. The 18 ray tracing cores provide some future-proofing, but Fivem is unlikely to heavily utilize them. The GPU's 150 W TDP and 450 W suggested PSU make it a power-efficient option for a mid-range system.

The GPU's performance in Fivem is characterized by a significant drop-off at 4K. The 50 FPS at Low settings and 24 FPS at Ultra represent a 52% performance difference, which is a larger relative gap than at lower resolutions. This suggests that the GPU's memory bandwidth and compute resources are insufficient for the high-resolution workloads, making the Arc B570 a better fit for 1080p and 1440p gaming in Fivem.