Fivem

The AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 5080 combination delivers a remarkably wide performance envelope in Fivem, with average frame rates ranging from 64.4 FPS at 4K Ultra to 355.5 FPS at 1080p Low. The measured data shows that the choice of settings preset has a profound impact on the experience, and the optimal selection depends heavily on the target resolution and refresh rate.

Settings Recommendations

The data indicates that the High preset offers the most balanced experience across all three tested resolutions. At 3840x2160, High produces an average of 79.8 FPS, which is substantially smoother than the 64.4 FPS delivered by Ultra while retaining a considerable visual quality advantage over Medium’s 98.5 FPS. This pattern repeats at 2560x1440, where High achieves 145.7 FPS against Ultra’s 114.5 FPS, and at 1920x1080, where High reaches 223.4 FPS versus Ultra’s 170.2 FPS. The High preset consistently provides a meaningful frame rate uplift over Ultra, typically in the 23-24% range, without sacrificing the core visual fidelity that makes the higher settings appealing.

For players with high-refresh-rate displays at 1440p, Medium at 185.2 FPS is the stronger recommendation, as it nearly guarantees compatibility with 165Hz panels while still delivering a richer image than Low’s 230.4 FPS. At 1080p, the situation is different: Low’s 355.5 FPS and Medium’s 275.5 FPS both exceed what most monitors can display, making High at 223.4 FPS the sensible ceiling for visual quality. Conversely, at 4K, the data shows that Ultra should be avoided unless a 60Hz display is the target, since the 64.4 FPS average leaves little headroom for demanding multiplayer scenarios. The measured spread at 4K—from 64.4 FPS at Ultra to 130.5 FPS at Low—reveals that settings scaling is exceptionally effective in this game, allowing users to nearly double performance by dropping from Ultra to Low.

GPU Role

The NVIDIA GeForce RTX 5080’s 16 GB of GDDR7 memory over a 256-bit bus, yielding 960.0 GB/s of bandwidth, proves more than sufficient for Fivem’s demands. The data shows no indication of VRAM capacity being a limiting factor at any tested setting, even at 4K Ultra where the 64.4 FPS result is more likely constrained by the GPU’s compute throughput than its memory subsystem. The card’s boost clock of 2617 MHz, built on the Blackwell 2.0 architecture with 10752 shading units, drives a peak FP32 throughput of 56.28 TFLOPS, which the benchmark results suggest is ample for the game’s engine at lower resolutions.

The performance scaling across settings at each resolution provides insight into the GPU’s workload. At 4K, moving from Low to Medium costs 32.0 FPS (from 130.5 to 98.5), while moving from Medium to High costs another 18.7 FPS, and High to Ultra costs 15.4 FPS. This pattern indicates that Fivem’s quality presets place progressively heavier loads on the graphics pipeline, but the RTX 5080’s 112 ROPs and 336 TMUs handle the transition gracefully. The 3DMark Steel Nomad DX12 score of 8637, combined with a PassMark G3D score of 36565, places the GPU in the 89th percentile among all tested graphics cards, reinforcing that it is a top-tier component whose role in this combo is to provide the raw rasterization power Fivem requires.

FAQ

Q: What is the highest average frame rate recorded for this combo in Fivem?

A: The highest measured average is 355.5 FPS, achieved at 1920x1080 with the Low settings preset.

Q: How much performance is lost when moving from 1080p to 4K at the same settings?

A: At High settings, the average drops from 223.4 FPS at 1080p to 145.7 FPS at 1440p, and further to 79.8 FPS at 4K. This represents a 64.3% reduction from 1080p to 4K.

Q: Is the RTX 5080’s 16 GB VRAM sufficient for Fivem at maximum settings?

A: Yes, the data shows playable performance at 4K Ultra with 64.4 FPS average, and the memory bandwidth of 960.0 GB/s appears adequate, as no memory-related bottlenecks are evident in the measured results.

Q: Which settings preset offers the best balance of visual quality and performance at 2560x1440?

A: High, at 145.7 FPS, provides a substantial improvement over Ultra’s 114.5 FPS while remaining visually richer than Medium’s 185.2 FPS, making it the recommended choice for most users.

Q: How does the RTX 5080 compare to its nearest rivals in synthetic benchmarks?

A: The GPU’s average benchmark score of 59188 places it 1.6% ahead of the Intel Arc A570M and 2.5% ahead of the Intel Arc A580, while trailing the Intel Arc Pro A60 by 1.9%.

Q: Does the CPU or GPU limit performance more at lower resolutions?

A: At 1080p Low, the 355.5 FPS result, combined with the CPU’s strong single-thread score of 1292 in 3DMark and 8430 in Cinebench R23, suggests the processor is the primary driver at these frame rates.

Measured FPS Breakdown

At 3840x2160, the measured averages are 64.4 FPS at Ultra, 79.8 FPS at High, 98.5 FPS at Medium, and 130.5 FPS at Low. The progression from Low to Ultra shows a steady decline, with the largest single-step drop occurring between Low and Medium, a loss of 32.0 FPS. The High-to-Ultra transition is the smallest step, costing 15.4 FPS, which explains why High is often the preferred preset at this resolution.

At 2560x1440, the results are 114.5 FPS at Ultra, 145.7 FPS at High, 185.2 FPS at Medium, and 230.4 FPS at Low. The relative scaling is similar to 4K, but the absolute frame rates are substantially higher, with every preset except Ultra exceeding 140 FPS. The gap between Low and Medium at 1440p is 45.2 FPS, while the gap between High and Ultra is 31.2 FPS.

At 1920x1080, the data shows 170.2 FPS at Ultra, 223.4 FPS at High, 275.5 FPS at Medium, and 355.5 FPS at Low. This resolution demonstrates the most dramatic settings sensitivity, with Low delivering nearly double the frame rate of Ultra. The Medium preset at 275.5 FPS is particularly notable, as it offers a 55.3 FPS advantage over High while still providing a solid visual baseline.

Resolution Scaling

The transition from 1920x1080 to 2560x1440 at High settings reduces the average from 223.4 FPS to 145.7 FPS, a 34.8% decrease. Moving from 1440p to 4K at the same preset further reduces performance to 79.8 FPS, a 45.2% drop. At Low settings, the scaling is even more pronounced: 355.5 FPS at 1080p falls to 230.4 FPS at 1440p (35.2% reduction) and then to 130.5 FPS at 4K (43.4% reduction). This consistent pattern across presets indicates that Fivem scales with resolution in a predictable, nearly linear fashion.

The fact that the percentage drops are similar across Low, Medium, High, and Ultra suggests that the GPU is the dominant limiting factor as resolution increases. If the CPU were the bottleneck, we would expect the 4K results to show smaller percentage reductions because the GPU workload would be less constrained by the processor. Instead, the data reveals that even at 4K Low, the 130.5 FPS result still leverages significant GPU headroom, implying the RTX 5080 is well-matched to this game’s rendering demands at high resolutions.

CPU Role

The AMD Ryzen 9 9950X3D, with 16 cores and 32 threads based on the Zen 5 architecture, provides enormous computational headroom that directly supports Fivem’s multiplayer workloads. The processor’s boost clock of 5.70 GHz and 128 MB of shared L3 cache contribute to strong single-threaded performance, as evidenced by the 3DMark single-thread score of 1292 and the Cinebench R23 single-core score of 8430. This is critical for Fivem, which often relies on a few heavily loaded threads for game logic and network synchronization.

The data shows that at 1080p Low, the system reaches 355.5 FPS, a result that cannot be achieved without a CPU capable of feeding the GPU at extreme rates. The CPU’s PassMark single-thread score of 4737 and multithread score of 70255, along with a 96th percentile ranking among all CPUs, confirm its elite status. Compared to its nearest rivals, the 9950X3D’s average benchmark score of 71660 is 1.8% higher than the AMD Ryzen 9 9950X and 2.2% higher than the Intel Core i7-14700KF, while trailing the Intel Xeon 6517P by 1.9%. This indicates that the 9950X3D is not just a capable gaming CPU but also one of the fastest mainstream processors available, ensuring it does not become a bottleneck in Fivem even at the highest frame rates.

How This Combo Ranks

Among the 1792 tested combinations in this database, this pairing of the AMD Ryzen 9 9950X3D with the NVIDIA GeForce RTX 5080 achieves a rank of 64 in Fivem. This places the combination in the top 3.6% of all tested systems, a strong result that aligns with the individual component rankings: the CPU sits in the 96th percentile and the GPU in the 89th percentile. The combo’s high rank suggests that Fivem benefits significantly from the CPU’s exceptional single-thread performance combined with the GPU’s high rasterization throughput.

The rank of 64 indicates that while this is an elite configuration, there are 63 other combos that perform better in this specific game. Given the CPU’s 1.8% advantage over the Ryzen 9 9950X and the GPU’s 1.6% lead over the Intel Arc A570M, the gap to the top-ranked systems is likely driven by even more powerful GPUs or CPUs with higher clock speeds. However, the measured FPS results show that this combo already delivers excellent performance across all resolutions and settings, with only 4K Ultra falling below 80 FPS. The data suggests that for most users, the difference between rank 64 and a higher rank would be imperceptible in real-world gameplay, as the frame rates are already well above display refresh rates in most scenarios.