Fivem

Fivem’s performance with the AMD Ryzen 7 9800X3D and NVIDIA GeForce RTX 3070 is heavily dictated by resolution and settings, with the data showing a clear transition from a CPU-bound experience at 1080p to a GPU-bound one at 4K. The combo ranks in the 47th percentile of tested configurations, indicating that while it is not a top-tier pairing for this title, it delivers solid, playable frame rates across most scenarios. The benchmark results reveal that the RTX 3070 is the primary limiter at higher resolutions, while the Ryzen 7 9800X3D’s strong single-thread performance ensures high frame rates when the graphical load is reduced.

Resolution Scaling

The frame rate drop from 1080p to 4K is dramatic and reveals a system that shifts from being CPU-limited to GPU-limited as pixel count increases. At 1080p Low settings, the combo produces 212.6 FPS, but at 4K Low, that figure plummets to 76.1 FPS — a reduction of 64%. This steep decline indicates that at 1080p, the graphics card is not the bottleneck; the CPU is capable of pushing far more frames than the GPU can render, even at the lowest settings. The scaling between 1080p and 1440p is also significant: at High settings, the average drops from 134.2 FPS to 88.6 FPS, a 34% decrease. This shows that 1440p begins to stress the RTX 3070 more heavily, but the CPU still has headroom.

The most telling data point is the 4K Ultra result, which lands at 38.9 FPS. Compared to 1080p Ultra’s 104.2 FPS, this represents a 63% performance loss. The pattern is consistent: each resolution jump costs roughly a third to two-thirds of the frame rate, depending on the preset. This behavior is classic for a mid-range GPU like the RTX 3070, which has the compute power for 1080p and 1440p gaming but struggles to maintain high frame rates at 4K, especially with Ultra settings. The 4K Medium result of 58.4 FPS and 4K High of 49.2 FPS further confirm that the GPU is the limiting factor at this resolution, as the CPU’s performance advantage cannot compensate for the sheer pixel throughput required.

GPU Role

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture with 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. Its boost clock of 1725 MHz and 5888 shading units give it a solid foundation for modern titles, but the 8 GB VRAM capacity becomes a constraint at higher resolutions and settings. The benchmark data supports this: at 4K Ultra, the combo only manages 38.9 FPS, which is below the threshold for a smooth experience. The GPU’s performance percentile of 72 versus all GPUs places it in the upper-midrange, and its nearest rivals include the AMD Radeon RX 6600 XT (0.9% slower) and the NVIDIA GeForce GTX 980 Ti (1% faster). This suggests the RTX 3070 is well-matched against its peers, but it is not a high-end part.

The memory bandwidth of 448.0 GB/s is sufficient for 1080p and 1440p, but at 4K, the combination of high pixel count and detailed textures likely exceeds the 8 GB frame buffer. The results show that dropping from Ultra to High at 4K yields a 26% improvement (from 38.9 to 49.2 FPS), and dropping to Medium yields a 50% improvement (58.4 FPS). This scaling indicates that texture and shader complexity are taxing the GPU’s memory and compute resources. The RTX 3070’s 20.31 TFLOPS FP32 performance is adequate for this game, but the data suggests that the card is the primary bottleneck when resolution is high. The GPU’s launch MSRP is 499 USD, and it is end-of-life, but the measured results show it still holds up well at lower resolutions.

How This Combo Ranks

The AMD Ryzen 7 9800X3D and NVIDIA GeForce RTX 3070 combination ranks 834 out of 1792 tested combos in Fivem, placing it in the 47th percentile. This rank is moderate, indicating that while the CPU is a top-tier part (90th percentile versus all CPUs), the GPU holds the combo back from higher standing. The CPU’s nearest rivals include the Intel Core i5-13600KF (0.7% slower) and the Intel Core i9-13900HK (0.6% slower), showing that the Ryzen 7 9800X3D is competitive with high-end Intel parts. However, the GPU’s rank of 72nd percentile versus all GPUs means that many other combos with faster graphics cards will outperform this pairing.

The data shows that this combo is not a leader in Fivem, but it is far from the bottom. The rank of 834 suggests that roughly half of all tested configurations deliver higher average frame rates. This is consistent with the measured FPS: at 1080p High, the combo hits 134.2 FPS, which is smooth, but at 4K Ultra, it drops to 38.9 FPS, which is below the 60 FPS target. The combo’s position is thus a reflection of the GPU’s midrange status, not the CPU’s capability. For users with 1080p or 1440p monitors, this rank is acceptable, but for 4K enthusiasts, it falls short. The CPU’s high benchmark scores, such as 34004 in Cinebench R23 multicore and 4800 in single-core, do not translate into 4K dominance because the GPU becomes the limiting factor.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings produce an average of 212.6 FPS, Medium yields 169.8 FPS, High drops to 134.2 FPS, and Ultra settles at 104.2 FPS. These numbers indicate that 1080p is well within the GPU’s comfort zone, and the CPU’s strong single-thread performance allows for high frame rates even at Ultra settings. The jump from Low to Medium is a 20% reduction, and from Medium to High is a 21% reduction, showing a steady scaling with graphical load.

Moving to 2560x1440, the frame rates remain playable but drop significantly. Low settings produce 138.7 FPS, Medium hits 113.8 FPS, High lands at 88.6 FPS, and Ultra falls to 69.7 FPS. The reduction from 1080p to 1440p at the same settings ranges from 34% at High to 35% at Low, indicating that the GPU is starting to feel the pressure. At 1440p Ultra, the 69.7 FPS result is still above 60 FPS, making it a viable resolution for high-quality gameplay.

At 3840x2160, the GPU is clearly the bottleneck. Low settings manage 76.1 FPS, Medium drops to 58.4 FPS, High falls to 49.2 FPS, and Ultra bottoms out at 38.9 FPS. None of these results are ideal for a smooth experience, with only Low settings exceeding 60 FPS. The scaling from Low to Ultra at this resolution is a 49% reduction, which is more severe than at lower resolutions. This confirms that the RTX 3070’s 8 GB VRAM and compute power are insufficient for 4K Ultra in Fivem, and users should stick to 1080p or 1440p for the best experience.

CPU Role

The AMD Ryzen 7 9800X3D is a Zen 5 architecture part with 8 cores and 16 threads, base clock of 4.70 GHz, and boost clock of 5.20 GHz. It features 96 MB of shared L3 cache, which is a key advantage for gaming workloads. Its benchmark scores are impressive: Cinebench R23 multicore at 34004, single-core at 4800, and Geekbench multicore at 18413. The CPU’s percentile of 90 versus all CPUs places it in the top decile, and its nearest rivals are all Intel parts with similar average scores (e.g., Intel Core i5-13600KF at 38028, only 0.7% faster).

In Fivem, the CPU’s role is most evident at 1080p and 1440p where frame rates are high. At 1080p Low, the 212.6 FPS result suggests the CPU is feeding the GPU enough data to saturate its rendering pipeline. The high single-thread score of 4800 in Cinebench R23 is particularly relevant, as Fivem is known to be sensitive to single-thread performance. The 3DMark single-thread score of 1212 further supports this. However, at 4K, the CPU’s advantage is negated by the GPU’s limitations, as evidenced by the 4K Low result of 76.1 FPS, which is not much higher than the 4K Medium result of 58.4 FPS. This indicates that the CPU is not the limiting factor at 4K; the GPU is. The CPU’s 120W TDP and DDR5 memory support (89.6 GB/s bandwidth) provide a solid platform, but the data shows that its capabilities are only fully utilized when the GPU can keep up.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows that 1920x1080 delivers the highest frame rates, with 134.2 FPS at High settings and 104.2 FPS at Ultra. At 2560x1440, High settings still produce 88.6 FPS, but 4K Ultra drops to 38.9 FPS, which is not playable for most users.

Q: Is the CPU or GPU the bottleneck at 4K?

A: At 3840x2160, the GPU is the clear bottleneck. The frame rate drops from 76.1 FPS at Low to 38.9 FPS at Ultra, while the CPU’s strong single-thread performance (4800 in Cinebench R23) cannot compensate for the GPU’s 8 GB VRAM and compute limits.

Q: How does this combo rank against others?

A: The combo ranks 834 out of 1792 tested combos, placing it in the 47th percentile. This is a midrange result, driven by the GPU’s 72nd percentile rank, while the CPU sits in the 90th percentile.

Q: What settings should I use for 1440p gaming?

A: For 1440p, High settings produce 88.6 FPS, which is above the 60 FPS threshold. Ultra drops to 69.7 FPS, which is still playable, but the scaling suggests High offers a better balance of visual quality and performance.

Q: Does the CPU’s cache size matter for Fivem?

A: The Ryzen 7 9800X3D has 96 MB of shared L3 cache, which contributes to its high benchmark scores (e.g., 34004 in Cinebench R23 multicore). The data indicates strong CPU performance at 1080p, where frame rates exceed 200 FPS on Low settings.

Q: Is the RTX 3070’s 8 GB VRAM sufficient?

A: At 1080p and 1440p, the 8 GB VRAM is adequate, as shown by playable frame rates. However, at 4K Ultra, the 38.9 FPS result suggests the VRAM capacity or bandwidth (448.0 GB/s) is a limiting factor, requiring lower settings to achieve smoother performance.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and frame rate. For 1080p, the Ultra preset at 104.2 FPS is the best choice, as it provides high visual quality while maintaining well above 60 FPS. If a player desires maximum smoothness, the Low preset at 212.6 FPS is available, but the visual trade-off is significant. For 1440p, the High preset at 88.6 FPS offers the best experience, balancing detail and performance. The Ultra preset at 69.7 FPS is also viable, but it is closer to the 60 FPS threshold and may cause drops in demanding scenes. The Medium preset at 113.8 FPS is an alternative for those prioritizing frame rate over fidelity.

At 4K, the data suggests that only the Low preset (76.1 FPS) provides a consistently smooth experience. The Medium preset at 58.4 FPS is borderline, and High (49.2 FPS) and Ultra (38.9 FPS) are below acceptable thresholds for most players. Therefore, for 4K gaming, the Low preset is recommended, but users should consider dropping to 1440p to enjoy higher quality settings. The scaling between presets at each resolution shows diminishing returns: the gap between Medium and High is smaller than the gap between Low and Medium, indicating that the GPU’s resources are taxed more heavily at higher quality levels. In summary, the combo is best utilized at 1080p Ultra or 1440p High, with 4K reserved for players who prioritize resolution over frame rate.