Fivem

AMD Ryzen 7 5800X3D with NVIDIA GeForce RTX 5070 Ti is a measured Fivem configuration. The game, released in 2017, yields an average of 285 FPS at 1080p Low, while the 4K Ultra preset drops that average to 56 FPS. This combo ranks 407th out of 3,707 tested combinations, and the CPU and GPU sit in the 80th and 86th percentiles of their respective component pools.

Resolution Scaling

The measured frame rates scale strongly with resolution. At 1920x1080, the preset range yields average FPS from 285 (Low) down to 154 (Ultra). Moving to 2560x1440 reduces those figures: the same Low preset gives an average of 207 FPS, while Ultra yields 101. At 3840x2160, the averages drop further, with Low at 115 and Ultra at 56. The gap between 1080p Low and 4K Low is substantial, and the same pattern holds across all settings.

These numbers indicate that at 4K, the NVIDIA GeForce RTX 5070 Ti becomes the primary driver for FPS. The 16 GB GDDR7 memory and 896 GB/s bandwidth allow the GPU to process heavy loads, but the rendering demands of 2160p pull average frame rates below 60 for the Ultra preset. In contrast, at 1080p the system delivers very high numbers; for instance, the 1080p High average of 198 FPS suggests the CPU is not the sole accommodator of performance, but that the GPU can still keep pace with the lower pixel count.

The Medium preset at each resolution provides a good case for observing the impact of pixel count: the average FPS at 4K is 90 (with a minimum of 77 and a maximum of 104), while at 1080p it is 247 (minimum 210, maximum 285). The 4K Medium minimum of 77 FPS is far from the 1080p average of 247, so the scaling is steep. This is typical of a GPU-bound scenario: as the resolution increases, the rendering cost rises sharply, and the CPU involvement becomes less obvious. The data suggests that the RTX 5070 Ti is stretched to its limit at 4K Ultra, where the average drops to 56 FPS.

How This Combo Ranks

Fivem’s measured test combinations place this setup at rank 407 out of 3,707. That is a solid position, given the CPU and GPU percentiles. The AMD Ryzen 7 5800X3D scores 80th percentile across all CPUs, while the RTX 5070 Ti ranks 86th among GPUs. These percentiles reflect that this combination is positioned well above average in both categories.

The CPU’s average benchmark score is 27,896, and its nearest rivals are all within 0.3% of that number. For example, the Intel Core i9-10900K is 0.1% higher, the AMD Ryzen 7 6800U is equal (0% difference), the AMD Ryzen AI 5 PRO 340 is -0.1% lower, and the Intel Core i5-12600KF is 0.3% higher. This means the 5800X3D stands nearly identical to those processors, with any difference negligible in most games.

For the GPU, the average score is 49,957. Its closest neighbors: the AMD Radeon RX Vega 64 is -0.1% (meaning the RTX 5070 Ti is 0.1% slower), the Intel Arc A550M is 0.4% ahead, the AMD Radeon RX 6900 XT is 2% faster, and the AMD Radeon RX 6800 XT is 3.1% slower than the 5070 Ti. So the 5070 Ti performs within a few percent of the RX 6800 XT and more than a few percent behind the RX 6900 XT. The combination’s overall rank of 407th – meaning only 406 options are better – fits with these component-level ratings.

CPU Role

The AMD Ryzen 7 5800X3D uses the Zen 3 architecture built on TSMC’s 7 nm process. It has 8 cores and 16 threads, with a base clock of 3.40 GHz and a boost clock of 4.50 GHz. The L3 cache is the defining block: 96 MB of shared capacity, which is unusually large for a desktop CPU and is particularly suited to data-heavy open-world multiplayer workloads such as Fivem. This large cache likely helps reduce memory latency and keep scene data resident close to the cores.

In synthetic benchmarks, the CPU shows strong single-thread performance: Cinebench R23 single-core 1,452 points, Geekbench single-core 2,017 points, and Passmark single-thread 3,234. These numbers indicate a good per-thread capability, important for a title like Fivem where NPC AI and server-side logic may not fully utilize all threads. The multi-thread results are also solid: Cinebench R23 multi-core 14,317, Geekbench multi-core 11,157, and Passmark multi-thread 28,309. With 8 cores and 16 threads, the CPU can handle both game logic and background tasks without excessive contention.

Within the game, the 1080p high frame rate set (198 FPS at High, 247 FPS at Medium, 285 FPS at Low) suggests the CPU is not saturating at these low-resolution settings; rather, they are high enough to saturate the GPU’s own capabilities. However, as resolution increased, the frame rates dropped, meaning that the CPU is likely off of the critical path in 4K runs. The fact that the average FPS at 1080p Ultra is still 154 FPS implies the CPU has enough headroom to feed the GPU at that preset. The 96 MB L3 cache and ZEN 3 architecture complement the aggressive core design, overall making the CPU a strong match for multiplayer GTA-like scenes.

FAQ

Q: What is the highest average FPS recorded for this combo?

A: The highest average FPS is 285, achieved at 1920x1080 with Low settings.

Q: How does the CPU compare to the Intel Core i9-10900K?

A: The Ryzen 7 5800X3D is 0.1% higher in average benchmark score than the Intel Core i9-10900K, according to the CPU’s nearest rival delta.

Q: What is the minimum FPS at 1440p Medium?

A: The 1440p Medium preset shows a minimum of 138 FPS and a maximum of 187 FPS, with an average of 163.

Q: What VRAM capacity does the RTX 5070 Ti have?

A: The GPU has 16 GB of GDDR7 VRAM, connected via a 256-bit bus with a bandwidth of 896.0 GB/s.

Q: What is the combined rank of this CPU/GPU pair in the Fivem test set?

A: It ranks 407th out of 3,707 total tested combinations.

Q: What is the boost clock of the CPU?

A: The CPU’s boost clock is 4.50 GHz.

GPU Role

The NVIDIA GeForce RTX 5070 Ti (Blackwell architecture, 5 nm process) houses 8,960 shading units, 70 ray tracing cores, 280 tensor cores, and 280 TMUs, with 96 ROPs. Its base clock is 2,295 MHz and the boost clock reaches 2,452 MHz. The memory subsystem is substantial: 16 GB of GDDR7 on a 256-bit bus providing 896 GB/s of bandwidth. This high-bandwidth configuration is well matched to 4K textures and heavy multitask GPU workloads.

The GPU performance markers are in well-known synthetic suites. Its Passmark G3D score is 32,974, the DirectX 12 score 127, and the Vulkan score 225,122 in Geekbench. In terms of nearest rivals, the RTX 5070 Ti is only 0.1% behind the RX Vega 64, 2% behind the RX 6900 XT, and 3.1% ahead of the RX 6800 XT. This indicates that the card delivers a performance that is slightly better than the last-generation RX 6800 XT but not at the level of a RX 6900 XT.

In the Fivem measured runs, the influence of the GPU is pronounced in the resolution scaling. At 4K Ultra, the average FPS is 56; at 1440p Ultra, it’s 101; and at 1080p Ultra, it’s 154. The incremental upgrade from Low to Ultra at each resolution demonstrates how much the GPU can absorb the load: at 1080p, Ultra still maintains 154 FPS, far above the threshold for smooth play. At 4K, however, even the High preset drops to 72 FPS, and the Low preset only gives 115 FPS. This pattern shows the RTX 5070 Ti has ample compute headroom for esports but is constrained by the pixel count at 4K. Combined with the 5800X3D’s strong single-thread performance, the system is optimized for high refresh rate 1080p and 1440p gaming rather than 4K gaming with maximum settings.

Settings Recommendations

The measured FPS tables provide a direct path to the best preset for each resolution. At 1920x1080, the Ultra preset is still playable at an average of 154 FPS, but the High preset pushes that to 198 FPS. The Medium preset reaches 247 FPS with a min of 210 and max of 285. If the goal is a refresh rate above 200 FPS, Medium is the sweet spot, offering 247 FPS average with a minimum above 200. Low goes to 285 FPS, but the visual quality degrades significantly. High sits at 198 FPS – perfect for 144Hz displays. Ultra at 154 FPS is still above the threshold, but the massive rendering load is not necessary when High offers similar beauty at 198 FPS.

For 2560x1440, the Medium preset gives 163 FPS average with a 138 minimum, which is recommended for a high refresh rate experience. The High preset yields 130 FPS, which is still smooth on typical 1440p monitors with G-Sync/FreeSync. Ultra drops to 101 FPS, which is playable but below the ideal for a 144Hz display. For 1440p, the best pick is Medium, as it offers the highest average without sacrificing the perception of quality, while High is acceptable if visual fidelity matters more.

At 3840x2160, the situation changes. The Medium preset averages 90 FPS, with a minimum 77 FPS – this is comfortable for a 60Hz 4K monitor and provides smooth gameplay. High averages 72 FPS, still above 60, but requires more GPU workload. Ultra drops to 56 FPS, which can cause stutter on lower refresh. For 4K, the recommended preset is Medium (90 FPS average) or High (72 FPS average), depending on whether you prefer higher fidelity. Low yields 115 FPS and is acceptable for those chasing higher frame rates (like a 120Hz 4K capable), though the graphical compromises are obvious. In summary, the measured data indicates that Medium presets offer the best overall balance between image quality and frame rates across all three resolutions, with High being a compact answer for 1080p and 1440p if you want extra detail, and 4K users should take Medium or High to stay above 60 FPS.