Control

The AMD Ryzen 7 5800X3D paired with the NVIDIA GeForce RTX 5070 Ti delivers a dominant 1080p experience in Control, but the data shows that 4K Ultra is the only setting that truly stresses this combination. This pairing ranks in the 91st percentile of all tested combos, placing 154th out of 1636, which indicates elite-level performance for this 2019 Action Adventure title.

Resolution Scaling

The frame rate drop from 1080p to 4K reveals a classic GPU-bound scenario at higher resolutions, while the CPU's strength becomes apparent at lower settings. At Low settings, the average FPS falls from 218.2 at 1080p to 119.6 at 4K, a reduction of 45.2%. This steep decline indicates that the GPU is the limiting factor as pixel count increases, since the 5800X3D’s 8-core, 16-thread configuration is more than capable of feeding frames at lower resolutions.

The scaling pattern shifts with settings. At Ultra, the drop from 132.1 FPS at 1080p to 66.5 FPS at 4K represents a 49.7% decrease, which is proportionally similar to the Low preset drop. This consistency across presets suggests that Control scales uniformly with resolution when the CPU is not the bottleneck. The 1440p results reinforce this: High settings yield 110.9 FPS, which is 73.5% of the 4K High score, while 1080p High achieves 151 FPS, 136.1% of the 1440p figure. The data shows a clear trend where each resolution step down from 4K provides a substantial and consistent FPS uplift, confirming the GPU is the primary constraint at all tested settings except the lowest.

FAQ

*Q: What is the best resolution for this combo in Control?*

A: The data shows 2560x1440 at High settings provides a strong balance with 110.9 FPS average. This is 42.1% faster than 4K High and still 26.7% slower than 1080p High, making it the sweet spot for high refresh rate monitors.

Q: How does the RTX 5070 Ti's VRAM affect performance?

A: The GPU features 16 GB of GDDR7 memory with 896.0 GB/s bandwidth. At 4K Ultra, the average FPS is 66.5, which is 17.3% lower than 4K High. The ample VRAM capacity ensures that even the highest preset at 4K does not cause memory-related stutters, as all measured averages are above 60 FPS.

Q: Is the Ryzen 7 5800X3D a bottleneck at 1080p?

A: Benchmark results indicate no significant CPU limitation. At 1080p Low, the combo achieves 218.2 FPS, which is 44.4% higher than 1080p High. If the CPU were the bottleneck, the gap between Low and High would be much smaller, as the GPU would be waiting on the processor. The 96 MB L3 cache and 4.50 GHz boost clock keep frame delivery high.

Q: How does this combo rank against other tested systems?

A: The combination ranks 154th out of 1636 tested combos for Control. This places it in the top 9.4% of all configurations, indicating that it outperforms the vast majority of systems tested for this game.

Q: What is the performance difference between Ultra and High settings at 1440p?

A: At 2560x1440, Ultra delivers 98.5 FPS while High achieves 110.9 FPS. This is a 12.6% performance gain from dropping one preset level, which is a significant improvement for a minimal visual fidelity reduction in most scenes.

Q: Can this combo handle 4K gaming?

A: Yes, the data shows playable frame rates at all 4K presets. The lowest average is 66.5 FPS at Ultra, while Low reaches 119.6 FPS. This makes 4K High (78 FPS) a viable option for smooth gameplay.

How This Combo Ranks

The comboRankInGame field places this specific CPU-GPU pairing at 154 out of 1636 tested combinations. This top-decile ranking reflects the synergy between the 5800X3D’s gaming-optimized cache and the 5070 Ti’s raw throughput. The CPU scores 83rd percentile among all CPUs, while the GPU sits in the 87th percentile, and their combined result in Control is stronger than either component’s individual standing. This suggests the pairing is well-matched for this title, with neither part dragging down the other.

The nearest rivals for the CPU, such as the Intel Core i9-11900K with a deltaPct of 0.1%, and the AMD Ryzen 5 7600 at -0.2%, show that the 5800X3D is competitive with modern mid-range and older high-end parts. For the GPU, the NVIDIA GeForce RTX 4080 matches the 5070 Ti exactly with a 0% deltaPct, while the AMD Radeon RX 7700S is 0.8% slower. These relative scores confirm that the combo’s ranking is driven by balanced, top-tier components rather than a single overpowered part.

Measured FPS Breakdown

At 3840x2160, the measured averages are 78 FPS on High, 119.6 on Low, 86.2 on Medium, and 66.5 on Ultra. The spread from Low to Ultra is 53.1 FPS, or 44.4% of the Low score. This wide range indicates that 4K users have significant headroom to adjust visual quality without dropping below acceptable frame rates. For 2560x1440, the scores are 110.9 High, 180.3 Low, 124.5 Medium, and 98.5 Ultra. The 1440p Low result of 180.3 FPS is the highest average at this resolution, and it is 63.7% faster than the 4K Low score, highlighting the GPU’s scaling efficiency.

The 1920x1080 results show 151 High, 218.2 Low, 169.3 Medium, and 132.1 Ultra. At 1080p, the difference between Low and Ultra is 86.1 FPS, which is 39.5% of the Low score. This smaller relative gap compared to 4K suggests that at 1080p, the CPU begins to play a more significant role in maintaining high frame rates, as the GPU is less stressed. The jump from Medium to High at 1080p is 18.3 FPS, while the jump from High to Ultra is 18.9 FPS, showing consistent scaling across presets.

CPU Role

The AMD Ryzen 7 5800X3D is a Zen 3 architecture processor with 8 cores and 16 threads. Its base clock is 3.40 GHz, boosting to 4.50 GHz, and it features a substantial 96 MB of shared L3 cache. This large cache is the defining feature for gaming, as it reduces memory latency and improves data access patterns. In Control, a game that streams environments and physics data, this cache helps maintain high minimum frame rates, though the measured data only provides averages.

The CPU’s benchmark scores show strong multi-threaded performance: a Cinebench R23 multicore score of 24063 and a Geekbench multicore score of 11061. The single-thread scores are equally important for game logic: Cinebench R23 single-core is 3397, and Geekbench single-core is 2116. These figures indicate the CPU can handle both the physics-heavy combat and the AI routines in Control without bottlenecking the RTX 5070 Ti. The 3DMark scores further support this: 7299 for 16 threads and 7285 for max threads, showing consistent scaling across thread counts. The 5800X3D’s percentile rank of 83rd among all CPUs means it outperforms the majority of processors, making it a solid foundation for this high-end GPU.

Settings Recommendations

For 4K gaming, the High preset is the optimal choice. It delivers 78 FPS, which is 17.3% faster than Ultra’s 66.5 FPS. The visual difference between High and Ultra is often minimal in Control, but the 11.5 FPS gain is meaningful for smoothness. At 1440p, High is also recommended, achieving 110.9 FPS. This provides a 12.6% improvement over Ultra’s 98.5 FPS, which is enough to push frame times below 9 milliseconds for a more responsive experience.

For 1080p, the Medium preset offers the best balance. It hits 169.3 FPS, which is 28.2% higher than High’s 151 FPS and 37.2 FPS faster than Ultra. The jump from Low to Medium is 48.9 FPS, but Low at 218.2 FPS is excessive for most displays. The data suggests that Medium provides the best experience at 1080p for those with 144Hz or 165Hz monitors, as it stays well above the refresh rate threshold with room to spare. The Low preset is only meaningful for competitive play or extreme refresh rate panels, but it sacrifices too much visual fidelity for the average user.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is a Blackwell 2.0 architecture GPU with 8960 shading units and 96 ROPs. It features 16 GB of GDDR7 memory on a 256-bit bus, providing 896.0 GB/s of bandwidth. The base clock is 2295 MHz with a boost of 2452 MHz. This memory bandwidth is crucial for Control, which uses high-resolution textures and complex particle effects. The 16 GB capacity ensures no texture swapping occurs even at 4K Ultra, as evidenced by the 66.5 FPS average staying consistent.

The GPU’s benchmark scores place it in the 87th percentile of all GPUs. Its 3DMark Steel Nomad DX12 score is 6604, and its Geekbench Vulkan score is 227554. These strong synthetic results translate to real-world performance in Control. The GPU’s nearest rival, the RTX 4080, matches its average score with a 0% deltaPct, confirming the 5070 Ti is a top-tier performer. The 43.94 TFLOPS of FP32 compute and 686.6 GTexel/s texture rate allow it to handle the game’s physics-based destruction and lighting at high resolutions. The 70 RT cores provide hardware-accelerated ray tracing, though the measured data does not include ray tracing-specific results, so its impact on FPS in this title is not quantified here.