Fivem

Fivem, a multiplayer modification framework built on Grand Theft Auto V, presents a unique benchmarking scenario where server-side scripts, game simulation, and traditional rendering all compete for hardware resources. The combination of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 5090 yields a fascinating dataset that highlights the game's distinct performance scaling characteristics. This analysis examines the measured FPS across resolutions and settings to determine where the bottlenecks lie and how this high-end pairing performs relative to other configurations.

FAQ

Q: What is the highest average FPS achieved by this combo in the measured data?

A: The highest recorded average FPS is 344, achieved at 1920x1080 resolution with Low settings. At the same resolution, the Medium preset delivers 297 FPS, while High produces 238 FPS and Ultra drops to 185 FPS.

Q: How does the combo rank among all tested configurations for Fivem?

A: This AMD Ryzen 5 7600 and NVIDIA GeForce RTX 5090 combination ranks 80th out of 3707 tested combos in Fivem, placing it in the top 2.2% of all configurations.

Q: What is the performance difference between the Ryzen 5 7600 and its closest rival, the AMD Ryzen 9 6900HX?

A: The Ryzen 5 7600 has an average benchmark score of 26324, which is 0.2% higher than the AMD Ryzen 9 6900HX's score of 26274. This puts the two processors statistically at parity in general synthetic benchmarks.

Q: Does the RTX 5090's 32 GB of VRAM provide any measurable benefit in Fivem?

A: The 32 GB of GDDR7 memory with 1.79 TB/s bandwidth is far beyond what Fivem requires at these settings. The FPS data shows that performance scales more dramatically with resolution and settings than with memory capacity, indicating that VRAM is not a limiting factor in these measurements.

Q: At which settings resolution does the FPS drop most significantly?

A: The most substantial single-step drop occurs moving from 2560x1440 to 3840x2160 at Low settings, where average FPS falls from 248 to 138, a reduction of 110 FPS. At Ultra settings, the same resolution change drops FPS from 122 to 67.

Q: How does the RTX 5090 compare to its nearest rival, the AMD Radeon RX 6850M XT?

A: The RTX 5090's average benchmark score of 79842 is 1.1% higher than the AMD Radeon RX 6850M XT's score of 78940. The RTX 5090 also sits at the 92nd percentile of all GPUs, while the comparison shows it is 1.4% lower than the AMD Radeon Pro Vega 64X.

GPU Role

The NVIDIA GeForce RTX 5090 is a monolithic powerhouse built on the Blackwell 2.0 architecture with a 5 nm process. Its 32 GB of GDDR7 memory on a 512-bit bus provides 1.79 TB/s of bandwidth, which is an extreme amount of memory throughput for any game, including Fivem. The GPU operates at a base clock of 2017 MHz and boosts to 2407 MHz, with memory running at 1750 MHz (28 Gbps effective). These specifications are far beyond the requirements of a multiplayer mod environment, yet the measured FPS data reveals that the RTX 5090 is not always the limiting component.

In Fivem, the GPU's role shifts dramatically depending on the preset. At 1080p with Low settings, the RTX 5090 produces 344 FPS, indicating the GPU is being fed a relatively light workload. The 21760 shading units and 680 texture mapping units are capable of immense throughput, but the game's draw calls and script-driven content often create CPU-side bottlenecks. The GPU's 176 ROPs and 423.6 GPixel/s pixel rate are more than sufficient for the rasterization demands, yet the average FPS at 4K Ultra (67 FPS) suggests that even this massive GPU cannot overcome the combination of high resolution and maximum settings.

The RTX 5090's 104.8 TFLOPS of FP32 performance is a staggering figure, but Fivem's engine does not scale linearly with raw compute. The measured results show a clear pattern: the GPU is underutilized at lower settings and resolutions, while at 4K Ultra it is finally pushed to a point where the frame rate drops to a playable but not exceptional 67 FPS. This suggests that while the RTX 5090 is capable of extreme performance, Fivem's engine and multiplayer server architecture prevent it from fully saturating the GPU until the highest graphical loads.

Resolution Scaling

The FPS drop from 1080p to 4K reveals important information about where the bottleneck lies in this system. At Low settings, the transition from 1920x1080 (344 FPS) to 2560x1440 (248 FPS) represents a 27.9% reduction, and further to 3840x2160 (138 FPS) is a 44.4% drop from the 1440p figure. This scaling pattern indicates that at Low settings, the CPU is heavily involved, and the GPU has enough headroom to handle the resolution increase without tanking performance.

At Ultra settings, the scaling is more aggressive but still shows CPU involvement. The jump from 1080p (185 FPS) to 1440p (122 FPS) is a 34.1% reduction, and from 1440p to 4K (67 FPS) is a 45.1% drop. The fact that 1080p Ultra cannot reach 200 FPS—despite the RTX 5090's capabilities—strongly suggests that the Ryzen 5 7600's six cores are the limiting factor at lower resolutions. The CPU's 3.80 GHz base clock and 5.10 GHz boost clock are solid, but Fivem's server-side scripts often run on a single thread, creating a bottleneck that no GPU can overcome.

When comparing settings scaling, the difference between Low and Ultra at 1080p is 159 FPS (344 vs 185), while at 4K the difference narrows to 71 FPS (138 vs 67). This convergence at higher resolutions indicates that the GPU becomes progressively more important as pixel count increases. At 4K, the RTX 5090's rendering load finally becomes significant enough to mask some of the CPU limitations, but the 67 FPS at Ultra still shows that even this GPU cannot fully compensate for the game's engine constraints.

Settings Recommendations

The measured data provides clear guidance for optimizing the Fivem experience with this hardware. At 1920x1080, the Medium preset delivers 297 FPS with a minimum of 253 FPS and maximum of 342 FPS. This represents an excellent balance, offering a 59 FPS improvement over High settings while maintaining well above 240 FPS for high-refresh-rate monitors. The Low preset at 344 FPS offers marginal gains over Medium but with a visual quality trade-off that most players would find unnecessary given the excellent Medium performance.

At 2560x1440, the Medium preset again proves optimal, delivering 196 FPS with a minimum of 166 FPS and maximum of 225 FPS. This provides a smooth experience on 144Hz and 165Hz displays, with the minimum FPS staying above the refresh rate of most monitors. The High preset at 157 FPS is also viable, but the 39 FPS gain from dropping to Medium is substantial for competitive multiplayer scenarios.

For 3840x2160, the Low preset at 138 FPS is the only option that maintains a consistently high refresh rate, though the Medium preset at 109 FPS (minimum 92 FPS) is still playable on 60Hz displays. The High preset at 87 FPS and Ultra at 67 FPS are below the threshold for smooth 90Hz+ gaming. The data recommends Medium at 4K as the sweet spot, providing a 22 FPS improvement over High while remaining visually acceptable. Across all resolutions, the Medium preset consistently offers the best balance of frame rate and visual fidelity for this combo.

Measured FPS Breakdown

At 1920x1080, the full range of settings shows the RTX 5090's raw power. The Low preset achieves 344 FPS average, while Medium produces 297 FPS with a minimum of 253 FPS and maximum of 342 FPS. High settings yield 238 FPS, and Ultra drops to 185 FPS. The 159 FPS spread between Low and Ultra at 1080p demonstrates that the GPU has enormous headroom, but the CPU begins to limit performance even at this resolution.

Moving to 2560x1440, the measured averages are 248 FPS for Low, 196 FPS for Medium (166 min, 225 max), 157 FPS for High, and 122 FPS for Ultra. The 126 FPS spread between Low and Ultra is smaller than at 1080p, indicating that the GPU is starting to take on more of the workload. The Medium preset's minimum of 166 FPS remains above the threshold for most high-refresh displays.

At 3840x2160, the averages compress further: 138 FPS at Low, 109 FPS at Medium (92 min, 125 max), 87 FPS at High, and 67 FPS at Ultra. The 71 FPS spread highlights that the GPU is now the primary bottleneck at 4K. The Ultra preset's 67 FPS is barely above console-level performance, while Low at 138 FPS shows that the RTX 5090 still has substantial untapped potential even at this resolution.

CPU Role

The AMD Ryzen 5 7600 is a six-core, twelve-thread processor based on the Zen 4 Raphael architecture, built on TSMC's 5 nm process. With a base clock of 3.80 GHz and boost clock of 5.10 GHz, it delivers strong single-thread performance, as evidenced by its 3DMark single-thread score of 999 and Cinebench R23 single-core score of 1852. The 32 MB of shared L3 cache and dual-channel DDR5 memory support (83.2 GB/s bandwidth) provide adequate bandwidth for gaming workloads.

In Fivem, the CPU's role is more pronounced than in typical games due to the multiplayer mod's dependency on server-side scripting and entity management. The benchmark data shows that at 1080p Low, the system achieves 344 FPS, but this is likely close to the CPU's limit for frame generation in this game. The Ryzen 5 7600's PassMark single-thread score of 3910 and multithread score of 27058 indicate solid performance, but Fivem's engine often cannot fully utilize all twelve threads.

The CPU's percentile ranking of 78th among all processors, with an average benchmark score of 26324, places it slightly above the AMD Ryzen 9 6900HX (0.2% faster) and Intel Core i9-11900KF (0.4% slower). These rivals show that the Ryzen 5 7600 is competitive in general compute, but Fivem's specific workload may not scale perfectly with its six cores. The 3DMark 16-thread score of 6499 versus the 2-thread score of 1938 shows a scaling efficiency of approximately 3.35x, which is reasonable but not exceptional for a six-core part.

How This Combo Ranks

The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 5090 combination ranks 80th out of 3707 tested combos in Fivem, placing it in the top 2.2% of all configurations. This is an impressive ranking, but it is not the absolute top tier, suggesting that other CPU choices may offer better Fivem-specific performance despite the RTX 5090 being one of the most powerful GPUs available.

Given that the RTX 5090 is at the 92nd percentile of all GPUs with an average benchmark score of 79842, the GPU is clearly a top-tier component. However, the CPU's 78th percentile ranking among all processors indicates that the Ryzen 5 7600, while strong, is not the absolute fastest option for this game. The combination's rank of 80th out of 3707 suggests that many configurations with higher-end CPUs (such as top-tier Ryzen 9 or Intel Core i9 parts) may achieve better Fivem performance, even with a less powerful GPU.

The measured FPS data supports this interpretation. At 1080p Low, the 344 FPS result is likely CPU-limited, meaning a faster processor could push even higher. The fact that this combo ranks 80th rather than in the top 10 suggests that Fivem's performance is heavily influenced by the CPU's single-thread capabilities and memory latency, areas where the Ryzen 5 7600 is good but not exceptional. The RTX 5090's massive GPU power is somewhat wasted at lower resolutions and settings, as the CPU cannot feed it enough frames to reach its full potential. At 4K Ultra, the combo shows its strength, but the rank reflects the overall performance across all tested scenarios, where the CPU bottleneck at lower resolutions drags down the average.