Fivem

The AMD Ryzen 7 5700G and NVIDIA GeForce RTX 5090 combination delivers a wide spread of frame rates in Fivem, ranging from a 67 FPS average at 4K Ultra to a 289 FPS average at 1080p Low. The data reveals a system where the CPU becomes the primary constraint at lower resolutions, while the GPU dominates the performance curve at higher settings.

Resolution Scaling

The measured FPS data shows how this combo scales from 1080p to 4K. At High settings, the average frame rate drops from 238 FPS at 1920x1080 to 157 FPS at 2560x1440, then further to 87 FPS at 3840x2160. This represents a 63% reduction from 1080p to 4K at High settings. The scaling pattern is consistent with a GPU-bound scenario at higher resolutions, where the RTX 5090's rendering workload increases substantially.

At Low settings, the frame rate reduction is more dramatic in relative terms. The 289 FPS at 1080p drops to 248 FPS at 1440p and then to 138 FPS at 4K — a 52% decrease from 1080p to 4K. The smaller absolute drop at 1440p (41 FPS) compared to the 4K drop (110 FPS from 1440p) suggests the GPU is still capable at 1440p Low, but the 4K resolution begins to strain the rendering pipeline.

The Medium settings row provides the only complete min/max data in the measurement set. At 1080p Medium, the average is 266 FPS with a minimum of 226 FPS and maximum of 305 FPS. Moving to 1440p Medium yields 196 FPS average with 166 FPS minimum and 225 FPS maximum. At 4K Medium, the average drops to 109 FPS with a 92 FPS minimum and 125 FPS maximum. The spread between minimum and maximum frames widens slightly at lower resolutions, indicating more frame time variability when the CPU is less burdened.

Ultra settings show the steepest scaling curve. The 185 FPS at 1080p Ultra falls to 122 FPS at 1440p Ultra and then to 67 FPS at 4K Ultra. This 64% reduction from 1080p to 4K at Ultra is the largest percentage drop across all settings presets, highlighting how the most demanding settings amplify the resolution penalty.

The data suggests that at 1080p, the Ryzen 7 5700G's eight cores and sixteen threads are likely the limiting factor, as frame rates across all settings remain below what the RTX 5090's raw compute would theoretically allow. At 4K, the GPU becomes the clear bottleneck, with even Low settings producing only 138 FPS average.

Settings Recommendations

The measured rows provide clear guidance for optimizing the experience. At 1080p, the Medium preset offers the best balance of smoothness and visual quality, with a 266 FPS average and a 226 FPS minimum that keeps frame pacing well above display refresh rates. The jump from Medium to Ultra at 1080p costs 81 FPS on average (from 266 to 185 FPS), a significant drop that may not justify the visual gains in a multiplayer title where responsiveness matters.

At 1440p, the High preset delivers a 157 FPS average, which remains fluid for competitive play. The Medium preset at 1440p produces 196 FPS average, but the 166 FPS minimum suggests occasional dips that could be noticeable on high-refresh displays. Ultra at 1440p drops to 122 FPS average, which is still playable but represents a 38% reduction from High.

For 4K, the Low preset at 138 FPS average is the only tier that approaches high-refresh territory. Medium at 4K provides 109 FPS average with a 92 FPS minimum, which is acceptable for 60Hz displays but may feel less responsive. High at 4K drops to 87 FPS, and Ultra at 4K falls to 67 FPS average. The data indicates that 4K Ultra is only suitable for 60Hz panels with VRR, while 4K Low is the choice for higher refresh rates.

The scaling between presets shows diminishing returns at higher settings. At 1080p, the gap from Low to Medium is 23 FPS (289 to 266), from Medium to High is 28 FPS (266 to 238), and from High to Ultra is 53 FPS (238 to 185). The Ultra preset disproportionately reduces performance, suggesting it enables effects that heavily tax the rendering pipeline.

How This Combo Ranks

The combination of AMD Ryzen 7 5700G and NVIDIA GeForce RTX 5090 ranks 139th out of 3707 tested combos in Fivem, placing it in the top 3.7% of all configurations. This strong ranking reflects the RTX 5090's substantial GPU capabilities, though the rank also indicates that many other CPU+GPU pairings achieve higher frame rates in this specific game.

The CPU's overall benchmark standing shows it is competitive with nearby rivals. The Ryzen 7 5700G scores 27051 in average benchmark score, placing it 0.2% behind the Intel Core i9-9900K (27097) and 0.4% ahead of the AMD Ryzen AI 7 445 (26936). The Intel Core i5-14400T scores 27166, which is 0.4% ahead of the 5700G. The Intel Core i7-1370P sits 0.6% behind at 26900. This grouping indicates the 5700G's CPU performance is essentially on par with these processors for general benchmarks.

The GPU's ranking is similarly tight. The RTX 5090's average benchmark score of 79842 places it 0.3% ahead of the NVIDIA Tesla P100 PCIe 16 GB (79605) and 0.6% ahead of the Tesla P100 PCIe 12 GB (79396). The AMD Radeon RX 6850M XT scores 78940, which is 1.1% behind, while the AMD Radeon Pro Vega 64X scores 80959, putting it 1.4% ahead. This suggests the RTX 5090 sits in a performance tier where small benchmark differences translate to meaningful FPS variations.

The combo rank of 139 out of 3707 indicates that while this pairing is strong, there are 138 combinations that achieve better results in Fivem specifically. Given that the CPU percentile is 79 (meaning it outperforms 79% of all CPUs) and the GPU percentile is 92, the combo rank is likely constrained by the CPU's relative weakness compared to top-tier gaming processors.

FAQ

Q: What is the highest average FPS this combo achieves in Fivem?

A: The highest measured average FPS is 289, achieved at 1920x1080 resolution with Low settings.

Q: How does the Ryzen 7 5700G compare to the Intel Core i9-9900K in average benchmark score?

A: The Ryzen 7 5700G scores 27051, which is 0.2% lower than the Intel Core i9-9900K's score of 27097.

Q: What is the minimum FPS recorded at 2560x1440 Medium settings?

A: The minimum FPS at 2560x1440 Medium is 166, with an average of 196 FPS and maximum of 225 FPS.

Q: What percentage of all GPUs does the RTX 5090 outperform?

A: The RTX 5090 has a percentile rank of 92, meaning it outperforms 92% of all GPUs in the benchmark database.

Q: What is the frame rate at 4K Ultra settings?

A: The average FPS at 3840x2160 Ultra settings is 67, which is the lowest measured average in the dataset.

Q: How many total combinations does this combo rank among?

A: This combo ranks 139th out of 3707 tested combinations in Fivem.

GPU Role

The NVIDIA GeForce RTX 5090 brings substantial resources to this pairing. Its 32 GB of GDDR7 memory on a 512-bit bus provides 1.79 TB/s of bandwidth, which is ample for Fivem's texture streaming and multiplayer asset loading. The GPU's 21760 shading units, 680 texture mapping units, and 176 render output units provide the raw throughput needed for high-resolution rendering.

The clock behavior is notable: the base clock is 2017 MHz with a boost clock of 2407 MHz. The boost clock represents a 19% increase over base, and the data suggests the GPU maintains high clocks under load given the strong FPS figures at 1440p and 1080p. The memory clock runs at 1750 MHz with 28 Gbps effective transfer rate, which aligns with the 1.79 TB/s bandwidth figure.

The RTX 5090's 92nd percentile ranking among all GPUs places it near the top of the performance hierarchy. Its average benchmark score of 79842 is closely matched by the nearest rivals, with the Tesla P100 PCIe 16 GB just 0.3% behind and the Radeon Pro Vega 64X 1.4% ahead. This tight grouping suggests the RTX 5090 sits at a performance plateau where architectural differences matter more than raw specifications.

The GPU's 104.8 TFLOPS FP32 performance and 1,636.8 GTexel/s texture rate indicate it can handle Fivem's draw calls and shader workloads without becoming the primary constraint at lower resolutions. However, the 4K results show the GPU does become limiting at that resolution, particularly at Ultra settings where the 67 FPS average suggests the rendering pipeline is fully saturated. The 423.6 GPixel/s pixel rate supports this interpretation, as 4K Ultra demands substantial pixel throughput.

CPU Role

The AMD Ryzen 7 5700G provides eight cores and sixteen threads based on the Zen 3 architecture, running on the Cezanne codename. Its base clock of 3.80 GHz can boost to 4.60 GHz, and the 65W TDP suggests efficient operation. The 16 MB of L3 cache and 512 KB L2 cache per core provide reasonable memory locality for game workloads.

The CPU's benchmark results show a mixed profile. Single-thread performance is modest at 899 in 3dmark_single_thread and 1494 in Cinebench R23 single-core. Multi-threaded performance is stronger, with 6629 in 3dmark_16_threads and 12830.5 in Cinebench R23 multicore. The PassMark multithread score of 24419 and single-thread score of 3283 further illustrate the CPU's balanced capabilities.

The 79th percentile ranking among all CPUs reflects this mid-to-high-end positioning. The nearest rivals are tightly clustered, with the Core i9-9900K 0.2% ahead and the Ryzen AI 7 445 0.4% behind. This clustering indicates that the 5700G's CPU performance is competitive with these alternatives but does not stand out in either direction.

In Fivem specifically, the CPU's role appears significant at 1080p. The frame rates at 1080p across all settings (185-289 FPS) are lower than what the RTX 5090 alone would likely produce, suggesting CPU limitation. The 8-core, 16-thread configuration with a 4.60 GHz boost clock should handle Fivem's multiplayer logic, but the data indicates that the CPU cannot fully feed the GPU at lower resolutions. At 4K, the CPU becomes less of a factor, as the GPU workload dominates.

The memory bandwidth of 51.2 GB/s from dual-channel DDR4 may also contribute to the CPU's constraint at high frame rates. While the 16 MB L3 cache helps mitigate memory latency, the system's overall memory throughput is lower than what newer platforms offer, potentially limiting performance in CPU-bound scenarios.

Measured FPS Breakdown

At 1920x1080, the measurements show a clear progression across settings. Low settings produce 289 FPS average. Medium settings yield 266 FPS average with a 226 FPS minimum and 305 FPS maximum. High settings drop to 238 FPS average. Ultra settings produce 185 FPS average. The 1080p results span a 104 FPS range from Low to Ultra.

At 2560x1440, the values scale down consistently. Low settings deliver 248 FPS average. Medium settings produce 196 FPS average, 166 FPS minimum, and 225 FPS maximum. High settings yield 157 FPS average. Ultra settings result in 122 FPS average. The 1440p range from Low to Ultra is 126 FPS.

At 3840x2160, the performance drops significantly. Low settings achieve 138 FPS average. Medium settings produce 109 FPS average, 92 FPS minimum, and 125 FPS maximum. High settings yield 87 FPS average. Ultra settings result in 67 FPS average. The 4K range from Low to Ultra is 71 FPS, which is narrower than at lower resolutions due to the GPU becoming the limiting factor.

The Medium settings row is the only one with complete min/max data across all resolutions. At 1080p Medium, the 79 FPS spread between minimum and maximum indicates some frame time variability. At 1440p Medium, the spread narrows to 59 FPS. At 4K Medium, the spread is 33 FPS. This pattern suggests that frame pacing becomes more consistent as resolution increases, likely because the GPU workload smooths out CPU-side fluctuations.

The performance gaps between settings are not uniform. At 1080p, the Low-to-Medium gap is 23 FPS, Medium-to-High is 28 FPS, and High-to-Ultra is 53 FPS. At 1440p, the corresponding gaps are 52, 39, and 35 FPS. At 4K, the gaps are 29, 22, and 20 FPS. This shifting pattern indicates that at 1080p, the Ultra preset has a disproportionate performance cost, while at 4K, all presets have similar incremental costs.