Fivem

The AMD Ryzen 5 5600G paired with the NVIDIA GeForce RTX 4070 presents a compelling case study in system balancing for Fivem, a multiplayer modification that is notoriously sensitive to both CPU and GPU loads. The measured data reveals a configuration where the GPU’s raw power is frequently held in check by the processor’s capabilities, particularly at lower resolutions. This analysis examines the measured FPS across resolutions and settings to understand where the bottleneck lies and what it means for the overall experience.

Resolution Scaling

The FPS data across the three tested resolutions shows a classic pattern of GPU-bound scaling at higher settings, but with a notable CPU limitation emerging at 1080p. At 4K Ultra, the combo produces 47 FPS, while dropping to 4K Low yields 95 FPS, indicating that the RTX 4070 is the primary driver of performance as settings and pixel count increase. The gap between Low and Ultra at 4K is substantial, with the Low preset delivering more than double the frame rate of Ultra, which strongly suggests the GPU’s fill rate and shading power are the limiting factors at this resolution.

Moving to 1440p, the scaling becomes more moderate. The High preset achieves 108 FPS, while Low reaches 171 FPS, a difference of 63 FPS. This still indicates significant GPU headroom, but the CPU begins to play a more substantial role. At 1080p, the trend shifts dramatically. The Low preset hits 260 FPS, while High produces 164 FPS, and Ultra drops to 128 FPS. The jump from 1080p Low to 1440p Low is only 89 FPS (from 171 to 260), which is a smaller relative drop than the 4K to 1440p transition for the same settings. This data implies that at 1080p, the Ryzen 5 5600G’s six cores and 12 threads are struggling to feed the RTX 4070 enough frames, creating a CPU bottleneck that caps performance well below what the GPU could theoretically deliver.

The 4K Medium setting, with an average of 75 FPS and a minimum of 64 FPS, shows that even at this high resolution, the system can maintain playable framerates when not maxing out every option. The data suggests that Fivem’s engine, which is based on an older GTA V framework, does not scale perfectly with modern multi-core processors. The 5600G, with its Zen 3 architecture and 16 MB of L3 cache, provides solid single-thread performance, as evidenced by its Cinebench R23 single-core score of 1409, but this may not be enough to fully saturate the RTX 4070’s capabilities in a game that is often limited by draw calls and scripting. The results indicate that users targeting 4K should expect to use Medium or High settings to stay in a comfortable range, while those at 1080p will find the CPU to be the primary constraint.

FAQ

Q: What is the maximum average FPS achievable at 1080p with this combo?

A: The highest average FPS recorded at 1920x1080 is 260 FPS, which is achieved with the Low settings preset. The Medium preset delivers 205 FPS, while High and Ultra produce 164 FPS and 128 FPS, respectively.

Q: How does the combo perform at 4K resolution with the High preset?

A: At 3840x2160 with High settings, the measured average FPS is 60. This is a playable frame rate, but it is the lowest High-preset score across all resolutions, indicating a significant performance hit from the higher pixel count.

Q: Is there a measurable minimum FPS for any settings combination?

A: Yes, the data includes minimum FPS values for the Medium preset at all three resolutions. At 4K, the minimum is 64 FPS; at 1440p, it is 115 FPS; and at 1080p, it is 175 FPS. No minimum FPS data is listed for Low, High, or Ultra presets.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset averages 171 FPS, while the Ultra preset averages 84 FPS. This represents a 87 FPS difference, or roughly a 51% reduction in average frame rate when moving from the lowest to the highest settings.

Q: How does the RTX 4070’s benchmark score compare to its nearest rivals?

A: The RTX 4070 has an average benchmark score of 37648. It is 0.1% faster than the NVIDIA Tesla P4, 0.4% faster than the AMD Radeon RX Vega 56, and 1.3% slower than the NVIDIA GeForce RTX 4080 Mobile. It is also 1.3% faster than the AMD Radeon PRO W6400.

Q: What is the combo’s overall ranking among tested configurations for Fivem?

A: The AMD Ryzen 5 5600G and NVIDIA GeForce RTX 4070 combination is ranked 851st out of 3707 tested combos for Fivem, placing it in the top 23% of all tested systems.

Settings Recommendations

Based on the measured FPS data, the optimal settings preset depends heavily on the target resolution and the user’s frame rate preference. For 1080p gaming, the Medium preset appears to be the sweet spot, delivering an average of 205 FPS with a minimum of 175 FPS. This provides a high-refresh-rate experience without sacrificing the visual fidelity that makes Fivem’s world engaging. The High preset at 1080p still offers a very respectable 164 FPS, but the jump from Medium to High yields a significant 41 FPS drop, suggesting that the extra visual details come at a steep cost in this configuration.

At 1440p, the High preset is the recommended choice, producing 108 FPS. This is a solid frame rate for most monitors, and the data shows that moving to Ultra reduces the average to 84 FPS, which may be noticeable in fast-paced scenarios. For users with 1440p displays, sticking to High offers a balanced experience. The Low preset at 1440p, while delivering 171 FPS, would likely look too sparse for a game that relies on environmental detail for immersion.

For 4K, the Medium preset is the most viable option, with an average of 75 FPS and a minimum of 64 FPS. This maintains a playable frame rate while providing a reasonable level of detail. The High preset at 4K barely hits 60 FPS, which is the lower boundary for smooth gameplay, and the Ultra preset falls to 47 FPS, which is below the threshold for comfortable play. The data indicates that users should prioritize the Medium preset at 4K to ensure a consistent experience, as the High preset’s 60 FPS average leaves no headroom for demanding scenes with many players or complex scripted events.

How This Combo Ranks

The combo’s rank of 851 out of 3707 tested combinations places it in the upper quartile of all systems benchmarked for Fivem. This ranking is notable because it reflects the balance between the Ryzen 5 5600G and the RTX 4070. The GPU itself is a high performer, with a percentile rank of 81 among all GPUs, and its average benchmark score of 37648 is within 1.3% of the RTX 4080 Mobile. However, the CPU, with a percentile rank of 74 among all CPUs, is not the top-tier processor that one might expect to pair with such a powerful GPU. This mismatch suggests that while the combo is strong overall, it is likely held back in CPU-intensive scenarios, which is consistent with the FPS data at 1080p.

The ranking also implies that many other combinations, likely those with more powerful CPUs like the Ryzen 7 or Intel Core i7 series, can extract more performance from the RTX 4070 in Fivem. The 5600G’s integrated graphics are a unique feature, but in this configuration, they are not used, as the discrete GPU handles all rendering. The 851st rank out of 3707 indicates that this is a capable setup, but it is not at the very top of the performance hierarchy. The data suggests that users seeking the absolute maximum FPS in Fivem would need to pair the RTX 4070 with a stronger CPU to avoid the bottleneck seen at 1080p. The 5600G’s 6 cores and 12 threads, while adequate for many titles, may not be sufficient to fully utilize the GPU’s potential in this specific game.

CPU Role

The AMD Ryzen 5 5600G is a six-core, twelve-thread processor based on the Zen 3 architecture, with a base clock of 3.90 GHz and a boost clock of 4.40 GHz. Its benchmark scores show a significant gap between single-threaded and multi-threaded performance. The Cinebench R23 multi-core score is 10551, while the single-core score is 1409. This indicates that the processor has decent multi-threading capabilities for a mid-range chip, but its single-core performance, which is critical for Fivem’s game logic and scripting, is only average. The Passmark single-thread score of 3177 and the Geekbench single-core score of 1801 reinforce this assessment.

In Fivem, the CPU’s role is to handle the game’s simulation, AI, and network code, which are often single-threaded or lightly threaded. The data from the measured FPS suggests that the 5600G is the limiting factor at 1080p, as the frame rates plateau at around 260 FPS on Low settings. This is not a reflection of the GPU’s limits, as the RTX 4070 is capable of significantly higher frame rates in less CPU-bound scenarios. The 16 MB of L3 cache and dual-channel DDR4 memory support are sufficient for most tasks, but the processor’s 65W TDP and 7 nm process node indicate it is designed for efficiency rather than raw performance.

The CPU’s benchmark data also shows it is closely matched with several rivals, including the Intel Core i3-1220P, which scores 0.1% higher, and the AMD Ryzen 5 7530U, which scores 0.2% higher. This places the 5600G in a competitive but not dominant position among mid-range processors. For Fivem, the implication is that users should not expect the CPU to push frame rates beyond the 260 FPS ceiling observed at 1080p. The processor’s boost clock of 4.40 GHz provides adequate speed for most situations, but the architecture’s limitations become apparent when the GPU is powerful enough to outpace it.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across three resolutions and four settings presets. At 1920x1080, the Low preset achieves an average of 260 FPS, the Medium preset 205 FPS, the High preset 164 FPS, and the Ultra preset 128 FPS. The Medium preset includes a minimum FPS of 175 and a maximum of 236, indicating stable performance. At 2560x1440, the Low preset averages 171 FPS, Medium 135 FPS (with a minimum of 115 and maximum of 156), High 108 FPS, and Ultra 84 FPS. The transition from 1080p to 1440p reduces the Low preset by 89 FPS, which is a 34% drop, while the Ultra preset drops by 44 FPS, a 34% reduction as well. This consistency suggests that the scaling is primarily GPU-driven at these settings.

At 3840x2160, the Low preset averages 95 FPS, Medium 75 FPS (with a minimum of 64 and maximum of 86), High 60 FPS, and Ultra 47 FPS. The drop from 1440p to 4K is more severe for the Low preset, which loses 76 FPS (from 171 to 95), while the Ultra preset loses 37 FPS (from 84 to 47). This demonstrates that the RTX 4070’s memory bandwidth of 504.2 GB/s and 12 GB of GDDR6X VRAM are sufficient to handle the increased resolution, but the raw compute power is taxed heavily. The data shows a clear pattern: the higher the resolution, the more the GPU becomes the bottleneck, while at 1080p, the CPU’s limitations are exposed. The Medium preset at all resolutions provides a balanced mix of visual quality and performance, with the 1080p Medium offering the best combination of high frame rates (205 FPS) and acceptable detail.

GPU Role

The NVIDIA GeForce RTX 4070 is a powerful graphics card based on the Ada Lovelace architecture, featuring 5888 shading units, 46 RT cores, and 184 tensor cores. Its boost clock of 2475 MHz and 12 GB of GDDR6X memory on a 192-bit bus provide a memory bandwidth of 504.2 GB/s. The GPU’s benchmark scores are impressive, with a Passmark G3D score of 26927 and a Geekbench Vulkan score of 174152. Its percentile rank of 81 among all GPUs indicates it is a top-tier performer, and its average benchmark score of 37648 places it just 0.1% behind the NVIDIA Tesla P4 and 0.4% ahead of the AMD Radeon RX Vega 56.

In Fivem, the GPU’s role is to render the game’s detailed environments, vehicles, and character models. The measured FPS data shows that the RTX 4070 is capable of delivering over 60 FPS at 4K on Medium settings, which confirms its power. The card’s 12 GB of VRAM is more than sufficient for Fivem, as the game does not typically require large texture pools. The GPU’s FP32 performance of 29.15 TFLOPS and texture rate of 455.4 GTexel/s ensure that it can handle the draw calls and shader work required by the game’s modded content, but the data suggests that the CPU often prevents it from reaching its full potential.

The benchmark results indicate that the RTX 4070 is not the limiting factor in this combo, except at the highest resolutions and settings. At 1080p, the GPU is likely idle much of the time, waiting for the CPU to provide frame data. The GPU’s 200W TDP and dual-slot design are typical for its class, and its support for DirectX 12 Ultimate and Vulkan 1.4 ensures compatibility with modern rendering techniques. However, Fivem’s engine is based on older technology, which may not fully utilize the GPU’s features. The data shows that the RTX 4070 is a capable partner for the 5600G, but its performance is constrained by the processor in many scenarios, making it a system where the GPU is often waiting for instructions.