Fivem

The AMD Ryzen 5 4600G paired with the AMD Radeon RX 9070 XT ranks 1022nd out of 3707 tested combinations in Fivem. This places the combo in the top 27.6% of all tested pairings, indicating a strong configuration for this multiplayer title. The ranking reflects a system that delivers playable frame rates across most settings, though the data reveals that the CPU is the limiting factor at lower resolutions, while the GPU takes over as the primary constraint at 4K.

How This Combo Ranks

The combo rank of 1022 out of 3707 tested pairs places this system firmly in the upper quartile of configurations for Fivem. This is a noteworthy result because it combines a mid-range CPU with a high-end GPU, and the data shows that the pairing works well in this specific game. The ranking suggests that while the CPU holds back the GPU at lower resolutions, the raw power of the RX 9070 XT still pushes the overall performance to a respectable level.

Benchmark results indicate that the Ryzen 5 4600G achieves a Passmark multithread score of 15992 and a single-thread score of 2653. These figures are modest compared to the GPU's capabilities, yet the system still manages to reach 233 FPS at 1080p Low settings. The CPU's 71st percentile ranking among all processors, with an average benchmark score of 17507, shows that it is not a top-tier part, but it handles Fivem's demands adequately.

The GPU, by contrast, sits at the 55th percentile among all GPUs with an average benchmark score of 13543. This is a peculiar data point because the RX 9070 XT is a flagship card, yet its percentile ranking is suppressed by the benchmark database's inclusion of many professional and legacy parts. The nearest rivals for the GPU include the AMD Radeon HD 7770M with a deltaPct of 0.1% and the NVIDIA GeForce GTX 570 with a deltaPct of 0.2%, which are vastly older architectures. This comparison highlights that the benchmark averages do not fully reflect the card's modern feature set.

GPU Role

The AMD Radeon RX 9070 XT features 16 GB of GDDR6 memory on a 256-bit bus, providing 644.6 GB/s of bandwidth. The card operates with a base clock of 1660 MHz, a game clock of 2400 MHz, and a boost clock of 2970 MHz. These specifications are substantial, and the data shows that they translate into strong performance in Fivem, particularly at higher resolutions where memory bandwidth becomes critical.

At 4K Ultra settings, the GPU manages an average of 47 FPS, which drops from the 60 FPS achieved at High settings. This 21.7% reduction from High to Ultra demonstrates that the card's capabilities are stretched at the highest preset with this resolution. The GPU's 128 ROPs and 256 TMUs allow it to maintain a pixel rate of 380.2 GPixel/s and a texture rate of 760.3 GTexel/s, which are more than sufficient for the game's workload.

The 16 GB VRAM capacity is a significant advantage for Fivem, a multiplayer game that often features custom assets and mods. The data shows that at 4K Medium settings, the card produces an average of 75 FPS with a minimum of 64 FPS and a maximum of 86 FPS. This indicates that the memory capacity is not a bottleneck, as the frame times remain consistent even with the higher resolution. The GPU's 644.6 GB/s bandwidth also helps maintain smooth performance in busy multiplayer scenes where texture streaming is common.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows that 2560x1440 at High settings delivers 108 FPS average, which is a strong balance between visual quality and performance. At 1080p, the CPU limits performance, while at 4K, the GPU is the primary constraint.

Q: How does the CPU affect performance at 1080p?

A: The Ryzen 5 4600G with 6 cores and 12 threads has a boost clock of 4.20 GHz. At 1080p Low settings, the system achieves 233 FPS, but the CPU's single-thread score of 2653 limits higher frame rates in this CPU-bound scenario.

Q: Is the RX 9070 XT well-suited for 4K gaming in Fivem?

A: Yes, at 4K Low settings the card produces 95 FPS average. The 16 GB VRAM and 644.6 GB/s bandwidth allow for smooth performance at this resolution, though Ultra settings drop to 47 FPS.

Q: What is the impact of switching from Medium to High settings at 1440p?

A: The frame rate drops from 135 FPS at Medium to 108 FPS at High, a reduction of 20%. This is a typical trade-off for improved visual fidelity in the game.

Q: How does this combo compare to other tested configurations?

A: The combo ranks 1022nd out of 3707 tested pairs, placing it in the top 27.6% of all configurations. This is a strong result given the CPU's mid-range positioning.

Q: Does the CPU bottleneck the GPU at any resolution?

A: Yes, at 1080p the CPU is the limiting factor, as shown by the 233 FPS cap at Low settings. At 4K, the GPU becomes the primary constraint, with performance scaling more predictably with settings changes.

Settings Recommendations

The measured data indicates that the Medium preset offers the best experience for this combo in Fivem. At 1080p Medium, the system achieves 205 FPS average with a minimum of 174 FPS and a maximum of 236 FPS. This provides a comfortable margin above high refresh rate monitors while maintaining visual quality. The frame time consistency, as shown by the minimum and maximum values, is better than at other presets.

For users prioritizing higher resolutions, 1440p Medium is the optimal choice, delivering 135 FPS average with a minimum of 115 FPS and a maximum of 155 FPS. This stays above 60 FPS even in the worst-case scenarios, making it suitable for competitive play. The 4K Medium preset also shows good consistency with 75 FPS average, but the 64 FPS minimum is close to the threshold where some players may notice stutters.

The High preset at 4K produces 60 FPS average, which is exactly at the standard refresh rate boundary. While playable, the lack of minimum FPS data suggests potential dips below 60 FPS in demanding scenes. The Ultra preset is not recommended due to the 47 FPS average at 4K and 84 FPS at 1440p, which are too low for smooth gameplay. The Low preset, while achieving high frame rates, sacrifices too much visual quality for the modest gains over Medium.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. Low settings produce 233 FPS average, Medium yields 205 FPS with a minimum of 174 FPS, High reaches 164 FPS, and Ultra drops to 127 FPS. The progression from Low to Ultra shows a 45.5% reduction in average FPS, which is expected given the increased graphical load cargo in the game.

The 2560x1440 resolution shows a similar pattern with lower absolute values. Low settings achieve 171 FPS, Medium produces 135 FPS with a minimum of 115 FPS, High delivers 108 FPS, and Ultra drops to 84 FPS. The data reveals that the gap between Medium and High is 20%, while the gap between High and Ultra is 22.2%, indicating that the Ultra preset is particularly demanding.

At 3840x2160, the frame rates become more constrained. Low settings yield 95 FPS, Medium produces 75 FPS with a minimum of 64 FPS, High drops to 60 FPS, and Ultra falls to 47 FPS. The reduction from High to Ultra at 4K is 21.7%, which is consistent with the pattern seen at lower resolutions. The 4K Low setting at 95 FPS is notable, as it shows that the GPU can handle this resolution when the CPU bottleneck is minimized.

CPU Role

The AMD Ryzen 5 4600G features 6 cores and 12 threads based on the Zen 2 architecture, with a base clock of 3.70 GHz and a boost clock of 4.20 GHz. The CPU has 8 MB of shared L3 cache and supports DDR4 memory with dual-channel bandwidth of 51.2 GB/s. These specifications are modest by modern standards, but the data shows they are sufficient for Fivem's CPU demands.

The CPU's benchmark scores reveal its performance characteristics. The Cinebench R23 multicore score of 13593 and single-core score of 1919 indicate a balanced processor. The Geekbench multicore score of 6637 and single-core score of 1460 further confirm its mid-range positioning. The Passmark single-thread score of 2653 is the most relevant metric for Fivem, as the game often relies on a few heavily loaded threads.

The data shows that at 1080p Low settings, the system achieves 233 FPS, but this is limited by the CPU. The 3DMark 2-thread score of 1430 and single-thread score of 726 indicate that the CPU's per-core performance is the bottleneck at this resolution. The 4.20 GHz boost clock helps, but the Zen 2 architecture's IPC is lower than newer designs. This is evident in the 1080p results, where the frame rate does not scale linearly with the GPU's capabilities.

Resolution Scaling

The measured FPS data shows a clear pattern of scaling from 1080p to 4K. At Low settings, the frame rate drops from 233 FPS at 1080p to 171 FPS at 1440p, a 26.6% reduction. From 1440p to 4K, the frame rate drops to 95 FPS, another 44.4% reduction. This indicates that the GPU is becoming more of a limiting factor as resolution increases, but the CPU still plays a role at 1440p.

At Medium settings, the scaling is similar: 205 FPS at 1080p, 135 FPS at 1440p, and 75 FPS at 4K. The reduction from 1080p to 1440p is 34.1%, while the reduction from 1440p to 4K is 44.4%. This pattern suggests that the transition to 4K places a heavier load on the GPU, as the pixel count more than doubles from 1440p.

At High settings, the frame rates are 164 FPS at 1080p, 108 FPS at 1440p, and 60 FPS at 4K. The 1080p to 1440p drop is 34.1%, and the 1440p to 4K drop is 44.4%. This consistent pattern across settings indicates that the GPU's memory bandwidth and compute capabilities are the primary constraints at 4K. The RX 9070 XT's 644.6 GB/s bandwidth is being fully utilized at this resolution, as evidenced by the frame rates scaling closely with the pixel count.

The 4K Low setting at 95 FPS is particularly interesting because it shows that the GPU can handle the resolution when the CPU is not the bottleneck. This suggests that the 4K High and Ultra results are limited by the GPU's raw shading power rather than memory capacity. The 16 GB VRAM is not exhausted, as the same card with less memory would show similar frame rates at these settings. The data indicates that for this combo, 1440p is the sweet spot where the CPU and GPU are more balanced, while 1080p is CPU-limited and 4K is GPU-limited.