Evolve

The AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 3070 pairing delivers a broad performance envelope in Evolve, spanning from high-refresh 1080p territory to playable 4K, though the data reveals a clear shift in system bottleneck behavior as resolution climbs. This combination ranks 778th out of 1695 tested combos for this title, placing it in the upper-middle tier of the database.

Resolution Scaling

The measured FPS data shows a pronounced and predictable decline as resolution increases, but the rate of that decline changes depending on the quality preset. At Low settings, the transition from 1920x1080 to 2560x1440 sees average frame rates drop from 213.5 FPS to 145.4 FPS, a reduction of roughly 32%. Pushing further to 3840x2160 yields 81.5 FPS, which is a 44% drop from the 1440p figure and a substantial 62% decline from the 1080p baseline.

High settings tell a similar story with slightly different magnitudes. The 1080p result of 133.6 FPS falls to 88.7 FPS at 1440p (a 34% decrease) and then to 50.9 FPS at 4K (a 43% drop from 1440p). Medium settings show 168.2 FPS at 1080p, 110.1 FPS at 1440p, and 66.1 FPS at 4K. Ultra is the most demanding tier, starting at 89.7 FPS at 1080p, declining to 58.8 FPS at 1440p, and reaching just 38.2 FPS at 4K.

The scaling pattern indicates that at 1080p, particularly with Low or Medium presets, the CPU is likely the limiting component given the very high frame rates achieved. The Ryzen 5 5600GT’s 6 cores and 12 threads, running at a base clock of 3.60 GHz and boost of 4.60 GHz, are sufficient to feed the RTX 3070 at these lower resolutions. However, as resolution increases to 4K, the burden shifts decisively to the GPU. The RTX 3070’s 8 GB of GDDR6 memory on a 256-bit bus with 448.0 GB/s bandwidth becomes the primary constraint, which is why the FPS drops are so steep. The gap between Low and Ultra settings at 4K (81.5 FPS vs 38.2 FPS) is far wider than at 1080p (213.5 FPS vs 89.7 FPS), underscoring that pixel throughput and memory bandwidth dominate at higher resolutions.

GPU Role

The NVIDIA GeForce RTX 3070 is the clear performance anchor in this configuration, particularly at higher resolutions. Its Ampere architecture, built on Samsung’s 8 nm process, packs 5888 shading units, 184 texture mapping units, and 96 ROPs. The GPU operates at a base clock of 1500 MHz and a boost clock of 1725 MHz, with memory running at 1750 MHz (14 Gbps effective). These specs translate to a pixel rate of 165.6 GPixel/s and a texture rate of 317.4 GTexel/s, figures that directly impact how quickly Evolve can fill the screen.

The memory subsystem is a critical factor. With 8 GB of GDDR6 VRAM, the RTX 3070 provides 448.0 GB/s of bandwidth. In Evolve, the data shows that Ultra settings at 4K push the GPU to its limits, yielding only 38.2 FPS. This suggests that the game’s high-resolution textures and effects are consuming significant VRAM capacity and bandwidth. The GPU’s FP32 throughput of 20.31 TFLOPS is substantial, but the 4K Ultra result indicates that the memory interface, not raw compute, is the limiting factor at that extreme.

The RTX 3070’s benchmark scores reinforce its position. It holds a percentile rank of 72 among all GPUs, with an average benchmark score of 28238. Its nearest rival, the AMD Radeon RX 6600 XT, scores 27985, a delta of 0.9% in favor of the RTX 3070. The NVIDIA GeForce GTX 980 Ti is also close at 27956 (1% behind), while the AMD FirePro S7150 leads slightly at 28409 (-0.6%). These tight margins indicate that the RTX 3070 sits in a competitive performance band, and the Evolve results reflect this mid-to-high tier positioning.

CPU Role

The AMD Ryzen 5 5600GT provides the processing foundation for this combo, and its role becomes more apparent at lower resolutions where frame rates exceed what the GPU can bottleneck. This CPU features 6 cores and 12 threads based on the Zen 3 architecture (Cezanne codename), fabricated on TSMC’s 7 nm process with 10,700 million transistors on a 180 mm² die. The 16 MB L3 cache and per-core L1 (64 KB) and L2 (512 KB) caches help maintain responsive frame pacing.

In synthetic benchmarks, the 5600GT shows strong single-thread and multi-thread capabilities. Its Cinebench R23 scores are 2438 single-core and 17272 multi-core, while Geekbench results are 2035 single-core and 7986 multi-core. The PassMark single-thread score of 3348 and multithread score of 20325 further quantify its capability. These numbers place the CPU at the 78th percentile among all processors, with an average benchmark score of 20740. Its nearest rival, the Intel Core i7-10700, scores 20746 (0% delta), while the AMD Ryzen 5 5600X scores 20680 (0.3% ahead of the 5600GT). This indicates the 5600GT is essentially performance-equivalent to those chips in aggregate.

For Evolve, the CPU’s influence is most evident in the 1080p Low preset, where the system achieves 213.5 FPS. At that level, the RTX 3070 is not the primary constraint; instead, the game’s physics and AI logic, which rely on the CPU’s 12 threads, are keeping pace with the GPU’s output. The 5600GT’s boost clock of 4.60 GHz provides the necessary single-thread performance for game logic, while the 6-core layout handles background tasks. However, at 4K, the CPU’s role diminishes, as evidenced by the fact that even at Low settings, the FPS drops to 81.5, a level that is clearly GPU-bound given the memory bandwidth constraints.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across three resolutions and four quality settings. At 1920x1080, the system delivers 213.5 FPS on Low, 168.2 FPS on Medium, 133.6 FPS on High, and 89.7 FPS on Ultra. These results show that the RTX 3070 is capable of driving high refresh rate monitors at 1080p, even with demanding settings. The gap between Low and Ultra is 123.8 FPS, demonstrating significant headroom for visual quality adjustments.

Moving to 2560x1440, the numbers compress somewhat: Low produces 145.4 FPS, Medium 110.1 FPS, High 88.7 FPS, and Ultra 58.8 FPS. The 1440p results indicate that for competitive play, Low or Medium settings would be necessary to maintain frame rates above 100 FPS. High settings remain playable for most users, while Ultra drops below 60 FPS, which may be a concern for those seeking smooth gameplay.

At 3840x2160, the performance envelope tightens considerably. Low settings yield 81.5 FPS, Medium 66.1 FPS, High 50.9 FPS, and Ultra 38.2 FPS. The 4K results clearly show that the RTX 3070 is stretched thin at this resolution, with only Low settings providing a consistently smooth experience above 60 FPS. Medium settings hover near playable territory, while High and Ultra require compromises or upscaling solutions. These figures starkly illustrate the GPU’s 8 GB memory capacity being a limiting factor at 4K, particularly with Ultra settings that likely exceed the VRAM budget.

FAQ

Q: What is the best resolution for this combo in Evolve?

A: Based on the data, 2560x1440 offers the best balance. High settings produce 88.7 FPS, while Low settings reach 145.4 FPS, both playable. At 1920x1080, all settings exceed 89 FPS, making it ideal for high refresh rate displays.

Q: How does the RTX 3070 compare to its closest rivals?

A: The RTX 3070 has an average benchmark score of 28238. It is 0.9% ahead of the AMD Radeon RX 6600 XT (27985) and 1% ahead of the NVIDIA GeForce GTX 980 Ti (27956). The AMD FirePro S7150 leads by 0.6% with a score of 28409.

Q: Is the Ryzen 5 5600GT a bottleneck at 1080p?

A: At 1080p Low settings, the system achieves 213.5 FPS, which is extremely high. The CPU’s 6 cores and 12 threads, with a boost clock of 4.60 GHz, appear sufficient to avoid bottlenecking the GPU at this resolution, as the frame rates are GPU-limited.

Q: Can this system handle 4K Ultra settings in Evolve?

A: No. At 3840x2160 Ultra settings, the average FPS is 38.2, which is below the 60 FPS threshold for smooth gameplay. The RTX 3070’s 8 GB VRAM and 448.0 GB/s bandwidth are insufficient for those extreme settings.

Q: How does the CPU’s multi-thread performance affect the game?

A: The Ryzen 5 5600GT scores 17272 in Cinebench R23 multi-core and 20325 in PassMark multithread. This level of performance ensures that the CPU can handle the game’s background processes without stalling, particularly at lower resolutions where FPS exceeds 200.

Q: What settings should a user prioritize for competitive play?

A: For competitive play at 1080p, Low settings (213.5 FPS) or Medium (168.2 FPS) provide the highest frame rates. At 1440p, Low (145.4 FPS) is recommended. These settings minimize visual effects to maximize responsiveness.