Downfall

The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 5060 delivers a robust experience in Downfall, a horror title from 2016. The benchmark data shows this combination is capable of high frame rates even at demanding resolutions, though the Ultra preset presents a significant challenge at 4K. This analysis breaks down the CPU and GPU contributions, addresses common questions, and provides settings recommendations based strictly on the measured results.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i5-13400F is a 10-core, 16-thread processor based on the Raptor Lake architecture, built on Intel's 10 nm process. It operates with a base clock of 2.50 GHz and a boost clock of 4.60 GHz, with a TDP of 65 W. Its cache configuration includes 80 KB of L1 per core, 1.25 MB of L2 per core, and a shared 20 MB of L3 cache. The processor supports both DDR4 and DDR5 memory in a dual-channel configuration and connects via PCIe Gen 5 with 16 lanes.

In synthetic benchmarks, the processor shows a strong balance between single-thread and multi-thread performance. Its single-thread score in Cinebench R23 is 3004, while the multi-core score reaches 21279. The Geekbench scores reflect a similar pattern, with 2301 for single-core and 10971 for multi-core. The 3DMark results are particularly relevant for gaming: the 2-thread score is 1880, but scaling up to 4 threads yields 3459, and 8 threads produces 5591. The maximum threads score of 7307 is nearly identical to the 16-thread score of 7314, indicating that the processor's additional threads beyond 8 provide diminishing returns for this workload.

For a horror game like Downfall, which typically relies on a mix of physics and AI calculations, the data suggests that the 13400F's performance is more than adequate. The processor's 82nd percentile ranking among all CPUs places it well above the median. When compared to its nearest rivals, the performance is tightly clustered. The Intel Core i7-13620H scores an average of 25201, which is just 0.1% higher than the 13400F's average of 25236. The AMD Ryzen 5 5600X3D scores 25365, a 0.5% advantage, while the AMD EPYC 9474F and AMD Ryzen AI 5 PRO 340 both sit slightly lower at 25103 and 25099, respectively, with delta percentages of 0.5% in favor of the 13400F.

The measured frame rates in Downfall indicate that the CPU is not the primary bottleneck in this configuration. At 1080p with Low settings, the average frame rate is 240.8 FPS, which is exceptionally high and suggests the CPU can feed the GPU without limitation. Even at 4K with Ultra settings, where the average frame rate drops to 46.7 FPS, the limiting factor is more likely the GPU's rendering load than the CPU's processing speed. The 13400F's 10 cores and 16 threads provide ample headroom for the game's background tasks, while its strong single-thread performance (a Passmark single-thread score of 3634) ensures responsive gameplay in scenarios that depend on a single primary thread.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture and utilizes the GB206 chip, manufactured on a 5 nm process by TSMC. It features 8 GB of GDDR7 memory on a 128-bit bus, providing a bandwidth of 448.0 GB/s. The GPU operates at a base clock of 2280 MHz and a boost clock of 2497 MHz, with a TDP of 145 W and a suggested power supply rating of 300 W. Its 3840 shading units, 120 TMUs, and 48 ROPs deliver a pixel rate of 119.9 GPixel/s and a texture rate of 299.6 GTexel/s, with FP32 performance rated at 19.18 TFLOPS.

In synthetic benchmarks, the RTX 5060 achieves a Passmark G3D score of 20891 and a Geekbench OpenCL score of 120785. Its 73rd percentile ranking among all GPUs indicates solidly above-average performance. The nearest rivals show a very tight cluster: the AMD Radeon RX 7700 XT scores 30097, a 0.0% difference, and the AMD Radeon RX 570 scores 30158, a 0.2% difference. The NVIDIA Tesla M60 and GeForce RTX 5070 Mobile are also close, with scores of 29969 and 29928, respectively, representing 0.5% and 0.6% deltas. The RTX 5060's average benchmark score of 30109 sits right in the center of this group.

The measured frame rates in Downfall demonstrate the GPU's scaling across resolutions and settings. At 1080p, the RTX 5060 delivers 240.8 FPS on Low, 196.7 FPS on Medium, 159.3 FPS on High, and 104 FPS on Ultra. Moving to 1440p, the averages are 172.5 FPS (Low), 139.4 FPS (Medium), 116.5 FPS (High), and 74 FPS (Ultra). At 4K, the performance drops more substantially: 108.3 FPS on Low, 88.2 FPS on Medium, 69.7 FPS on High, and only 46.7 FPS on Ultra.

The 8 GB VRAM capacity is sufficient for this game's demands, as the frame rates remain playable even at 4K on High settings. However, the steep decline at 4K Ultra — a 33% reduction from High — indicates that the GPU's memory bandwidth and compute resources are being heavily taxed. The data suggests that the RTX 5060 is well-matched to the 13400F for this title, with the GPU becoming the clear limiting factor at the highest settings.

FAQ

Q: What is the best resolution for maintaining a 60+ FPS average in Downfall with this combo?

A: All three resolutions tested can achieve over 60 FPS on the High preset. At 4K, the average is 69.7 FPS, while 1440p yields 116.5 FPS and 1080p reaches 159.3 FPS. Even the Ultra preset maintains 74 FPS at 1440p and 104 FPS at 1080p.

Q: How does the CPU's multi-threaded performance compare to its closest rival?

A: The 13400F's average benchmark score is 25236, which is 0.1% higher than the Intel Core i7-13620H's 25201 but 0.5% lower than the AMD Ryzen 5 5600X3D's 25365. The difference is marginal, indicating nearly identical overall performance.

Q: Is the RTX 5060's 8 GB VRAM a limitation at 4K in this game?

A: The data does not indicate a VRAM-related failure. At 4K High, the average is 69.7 FPS, and at 4K Medium it is 88.2 FPS. The 4K Ultra setting drops to 46.7 FPS, which is likely due to overall GPU compute load rather than a specific VRAM constraint.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 1440p, the Low preset averages 172.5 FPS, while the Ultra preset averages 74 FPS. This represents a reduction of approximately 57% from Low to Ultra, showing a significant performance cost for the highest visual quality.

Q: How does the GPU's benchmark score compare to the AMD Radeon RX 7700 XT?

A: The RTX 5060 has an average benchmark score of 30109, while the RX 7700 XT scores 30097. The delta percentage is 0.0%, meaning the two GPUs are statistically equivalent in average synthetic performance.

Q: Can this system handle 4K gaming in Downfall?

A: Yes, but with caveats. On the High preset, the average frame rate is 69.7 FPS, which is above the standard 60 FPS threshold. The Medium preset offers 88.2 FPS for a smoother experience, while the Ultra preset falls below 60 FPS at 46.7 FPS.

Settings Recommendations

Based on the measured frame rates, the optimal balance between visual quality and performance depends on the target resolution. At 1080p, the Ultra preset is the best choice, as it delivers an average of 104 FPS, which is well above the 60 FPS threshold and allows for high refresh rate displays. The data shows that even the most demanding setting at this resolution does not strain the hardware significantly.

At 1440p, the High preset is recommended for the best experience. It produces an average of 116.5 FPS, which is a comfortable margin above 60 FPS and only 22.9 FPS lower than the Medium preset's 139.4 FPS. The Ultra preset at 1440p averages 74 FPS, which is still playable, but the High preset offers a better frame rate headroom for maintaining consistency. The Low preset at 172.5 FPS is unnecessary unless chasing maximum refresh rates.

At 4K, the High preset is the clear recommendation, with an average of 69.7 FPS. This provides a playable experience with good visual fidelity. The Medium preset at 88.2 FPS offers a smoother alternative if frame rate stability is a priority, but the visual downgrade from High to Medium is noticeable. The Ultra preset at 46.7 FPS is not recommended for a consistent experience, as it falls below the 60 FPS standard. The Low preset at 108.3 FPS demonstrates that the hardware has headroom, but using Low at 4K sacrifices too much visual quality for the benefit of frame rate.

Across all resolutions, the High preset appears to be the sweet spot for this combination, providing a strong balance of image quality and performance. The data indicates that the RTX 5060's capabilities are best utilized at High settings, where the frame rates remain high without pushing the GPU to its limits.

How This Combo Ranks

The Intel Core i5-13400F and NVIDIA GeForce RTX 5060 combination ranks 805th out of 1741 tested combos in Downfall. This placement puts the system in the 54th percentile of all tested configurations, meaning it outperforms a slight majority of other combinations. The rank of 805 out of 1741 indicates that while this is a solid mid-range setup, there are many higher-performing configurations in the database.

The ranking is influenced by the measured frame rates across all resolutions and settings. At 1080p, the combo achieves frame rates as high as 240.8 FPS on Low and 104 FPS on Ultra, which are strong numbers. However, the 4K Ultra result of 46.7 FPS pulls the overall ranking down, as many higher-ranked combos likely maintain higher minimum frame rates at the most demanding settings. The rank is also contextualized by the individual component performances: the CPU sits at the 82nd percentile, while the GPU is at the 73rd percentile. The combination of two above-average components results in a system that is better than the median but not exceptional.

The tight clustering of the GPU's nearest rivals — with the RX 7700 XT at a 0.0% delta — suggests that the choice of graphics card has a significant impact on the final rank. Similarly, the CPU's performance is nearly identical to its rivals, meaning the combination's rank is largely determined by the GPU's ability to handle the game's demands at various settings. The data shows that this combo is well-suited for 1080p and 1440p gaming, with 4K High being the boundary of its comfort zone. For a horror title like Downfall, where immersion is key, the ability to maintain high frame rates at High settings across all resolutions makes this a reliable choice for a broad range of displays.