Downfall

Resolution Scaling

Downfall shows a steep but predictable performance curve as resolution climbs. At 1080p Low, the AMD Ryzen 5 5600GT + NVIDIA GeForce RTX 3070 Ti combo delivers 267.3 FPS average. Moving to 1440p Low drops that to 190.8 FPS, a 28.6% reduction. At 4K Low, the average falls to 118.8 FPS, which is 55.6% below the 1080p figure. This scaling pattern is typical for a GPU-bound horror title where pixel count dictates the load.

The gap between settings widens at higher resolutions. At 1080p, the spread from Low to Ultra is 151.1 FPS (267.3 down to 116.2). At 1440p, that spread narrows to 112.0 FPS (190.8 down to 78.8). By 4K, the spread is 68.1 FPS (118.8 down to 50.7). The shrinking delta indicates that at 4K, the RTX 3070 Ti becomes the primary constraint, while at 1080p the CPU still has headroom to feed the GPU.

Ultra settings are particularly punishing at 4K. The 50.7 FPS average at 4K Ultra is the lowest measured result in the entire set. Compare that to 4K High at 79.1 FPS — a 56% performance uplift just by dropping one preset tier. The data suggests that 4K Ultra is playable but not ideal for a horror game where smooth motion matters for atmosphere.

At 1080p, even Ultra settings stay above 116 FPS, meaning the combo never dips into uncomfortable territory at the lowest resolution. The 1440p results are the sweet spot: High hits 129.4 FPS, which is well above the 60 FPS threshold for smooth gameplay, and Medium reaches 158.1 FPS. The limiting component shifts from CPU at 1080p to GPU as resolution increases, with the 4K Ultra result (50.7 FPS) clearly showing GPU saturation.

GPU Role

The RTX 3070 Ti carries 8 GB of GDDR6X memory on a 256-bit bus, yielding 608.3 GB/s of bandwidth. Its base clock is 1575 MHz with a boost of 1770 MHz. In Downfall, these specs translate to a GPU that handles 1440p and 4K comfortably at medium-to-high settings, but the 8 GB frame buffer appears to be a factor at 4K Ultra where the average FPS collapses to 50.7.

The GPU's compute capabilities are substantial: 6144 shading units, 192 TMUs, and 96 ROPs. The pixel rate of 169.9 GPixel/s and texture rate of 339.8 GTexel/s help explain why the card performs well at 1440p — it has enough fill rate to keep up with the game's horror environments. The memory clock of 1188 MHz (19 Gbps effective) provides the bandwidth needed for high-resolution textures.

Compared to its nearest rivals, the RTX 3070 Ti posts an average benchmark score of 30849, sitting 0.3% above the AMD Radeon RX 590 GME (30755) and 0.8% below the AMD Radeon RX 6700 (31112). This places it in the 74th percentile of all GPUs. In Downfall specifically, the measured FPS shows the card is not the bottleneck at 1080p — the CPU can push 267.3 FPS on Low — but at 4K Ultra, the GPU's limits become evident.

The 290 W TDP and 600 W suggested PSU indicate this is a power-hungry card, but the data shows it delivers consistent frame rates across the resolution spectrum. The 8 GB VRAM is adequate for 1080p and 1440p at all settings, but the 4K Ultra result (50.7 FPS) suggests the card is running out of memory bandwidth or capacity at that extreme setting.

Settings Recommendations

The measured rows provide clear guidance: Medium settings offer the best balance of visual quality and performance across all resolutions. At 1080p Medium, the combo delivers 218.5 FPS — only 18.3% below Low but with noticeably better visuals. At 1440p Medium, 158.1 FPS is achieved, which is still far above what most displays can show. Even at 4K Medium, 98.7 FPS is solid for a horror title.

High settings are the second-best choice. At 1080p High, 181.5 FPS is still excellent, and at 1440p High, 129.4 FPS remains smooth. The 4K High result of 79.1 FPS is playable, though the drop from Medium (98.7 FPS) is 19.8%. For players with 144Hz monitors, Medium at 1440p (158.1 FPS) is the sweet spot; for 60Hz displays, High at 4K (79.1 FPS) works well.

Ultra settings should be avoided at 4K. The 50.7 FPS result is below the 60 FPS threshold that most players consider minimum for smooth gameplay. At 1440p Ultra, 78.8 FPS is acceptable, and at 1080p Ultra, 116.2 FPS is fine. However, the jump from High to Ultra at 1080p costs 65.3 FPS (from 181.5 to 116.2), which is a 36% penalty for marginal visual gains.

Low settings are only useful for competitive play or very high refresh rate displays. At 1080p Low, 267.3 FPS exceeds most monitors' capabilities. At 1440p Low, 190.8 FPS is still high. The data suggests Medium is the recommended starting point, with High as a fallback if visual fidelity is prioritized over frame rate headroom.

How This Combo Ranks

In the database of tested combinations, this pairing ranks 689th out of 1741 combos for Downfall, placing it in the 60.4th percentile of all tested systems. This is a respectable mid-pack position, reflecting the balance between the Ryzen 5 5600GT and the RTX 3070 Ti.

The CPU itself sits in the 78th percentile of all CPUs, with an average benchmark score of 20740. Its nearest rival, the Intel Core i7-10700, scores 20746 (0% delta), while the AMD Ryzen 5 5600X scores 20680 (0.3% higher). This means the 5600GT is essentially tied with these CPUs in synthetic benchmarks, but in Downfall, the combination's rank depends heavily on the GPU's ability to feed frames at lower resolutions.

The GPU's 74th percentile ranking (average score 30849) is slightly lower than the CPU's percentile, suggesting the GPU is the more limiting factor in this pairing. The combo rank of 689th out of 1741 is consistent with this: the system performs well but not at the top tier, which would require a more powerful GPU.

For context, the 1741 tested combos include both stronger and weaker pairings. This combo's position in the top 40% of all tested systems in Downfall indicates it handles the game well, particularly at 1440p where the measured FPS results are strong across all settings. The 4K Ultra result (50.7 FPS) is the only weak point, pulling the overall rank down from what the 1440p data would suggest.

FAQ

Q: Can this combo run Downfall at 4K smoothly?

A: Yes, but not at Ultra settings. At 4K Medium, the average FPS is 98.7, and at 4K High it is 79.1. At 4K Ultra, the average drops to 50.7 FPS, which is below the 60 FPS threshold. Drop to High or Medium for smooth 4K gameplay.

Q: What is the best resolution for this combo in Downfall?

A: The 1440p results are the most balanced. At 1440p High, the combo delivers 129.4 FPS, and at 1440p Medium, 158.1 FPS. Both are well above 60 FPS and provide a good visual-to-performance ratio.

Q: How does the RTX 3070 Ti compare to its closest rival in benchmarks?

A: The RTX 3070 Ti scores 30849 on average, which is 0.3% higher than the AMD Radeon RX 590 GME (30755) and 0.8% lower than the AMD Radeon RX 6700 (31112). It sits in the 74th percentile of all GPUs.

Q: Is the Ryzen 5 5600GT a bottleneck at 1080p in Downfall?

A: No. At 1080p Low, the combo hits 267.3 FPS, and at 1080p Ultra, 116.2 FPS. These numbers indicate the CPU can keep up with the GPU at the lowest resolution. The CPU's average benchmark score of 20740 is nearly identical to its closest rivals.

Q: What settings should I use for a 144Hz monitor?

A: At 1080p, Medium (218.5 FPS) or High (181.5 FPS) will easily exceed 144 FPS. At 1440p, Medium (158.1 FPS) is the only setting that exceeds 144 FPS; High (129.4 FPS) is close but slightly below.

Q: Is the 8 GB VRAM enough for Downfall?

A: The measured data shows yes for most settings. At 4K Ultra, the average FPS drops to 50.7, which may indicate VRAM pressure, but at 4K High (79.1 FPS) and 4K Medium (98.7 FPS), performance is solid. The 608.3 GB/s bandwidth appears sufficient for this game.

Measured FPS Breakdown

1920x1080 (1080p):

• Low: 267.3 FPS average
• Medium: 218.5 FPS average
• High: 181.5 FPS average
• Ultra: 116.2 FPS average

2560x1440 (1440p):

• Low: 190.8 FPS average
• Medium: 158.1 FPS average
• High: 129.4 FPS average
• Ultra: 78.8 FPS average

3840x2160 (4K):

• Low: 118.8 FPS average
• Medium: 98.7 FPS average
• High: 79.1 FPS average
• Ultra: 50.7 FPS average

The progression from 1080p to 4K shows consistent drops across all settings. At Low settings, the drop from 1080p to 1440p is 76.5 FPS, and from 1440p to 4K is 72.0 FPS. At Ultra settings, the drop from 1080p to 1440p is 37.4 FPS, and from 1440p to 4K is 28.1 FPS. The smaller absolute drops at Ultra settings reflect the GPU becoming the limiting factor at higher resolutions. The 1080p Low result of 267.3 FPS is the highest measured, while 4K Ultra at 50.7 FPS is the lowest. The combo is most consistent in the 1440p range, where even Ultra stays above 78 FPS.