Doom

The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4070 Ti pairing delivers a decisive performance tier for Doom, with measured frame rates that saturate nearly every display configuration. This analysis breaks down the optimal settings, the distinct roles of the CPU and GPU, and how this combination stacks up against the broader benchmark database.

Settings Recommendations

The measured data across three resolutions and four quality presets indicates that the Ultra preset is the intended experience for this hardware. At 1920x1080, the Ultra preset delivers an average of 221 FPS, which is only 50 FPS below the Low preset’s 368 FPS but provides the maximum visual fidelity. The scaling is consistent: moving from Ultra to High at 1080p yields a 50 FPS uplift (271 FPS), while the jump from High to Medium adds another 50 FPS (321 FPS). The performance headroom at this resolution is so vast that even the most demanding preset leaves the hardware far from a bottleneck.

At 2560x1440, the Ultra preset maintains a robust 143 FPS average, which is well above the 60 FPS threshold and comfortably within high-refresh-rate territory. The High preset at this resolution produces 175 FPS, representing a 22% improvement over Ultra. For users prioritizing frame rate over shadows and post-processing, High is the balanced choice, as it retains most visual quality while pushing the average closer to the 200 FPS mark.

The 3840x2160 results show the only scenario where settings require deliberate selection. The Ultra preset drops to a 78 FPS average, which is playable but not ideal for competitive play. The High preset at 4K provides 95 FPS, a 22% uplift over Ultra, while Medium achieves 112 FPS with a recorded minimum of 96 FPS. The data suggests that for 4K displays, the Medium preset offers the best blend of smoothness and quality, as its minimum frame rate of 96 FPS indicates consistent pacing, whereas the Ultra preset’s lack of a recorded minimum suggests potential dips below the average.

The Low preset at 4K reaches 129 FPS, but this comes at a substantial cost to visual fidelity. Given the hardware’s capability, the Medium preset at 4K is the recommended starting point, with High as a viable alternative for those who prioritize image quality over the extra 17 FPS.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor from the 7000 series, built on the Zen 4 architecture with a 5 nm process. Its base clock of 3.80 GHz and boost clock of 5.10 GHz provide the single-thread headroom that Doom’s engine leverages for game logic and draw calls. The processor’s benchmark scores reinforce this: the 3dmark single-thread test yields 999 points, while the 2-thread test doubles to 1938, indicating strong scaling on the initial thread pair.

Doom is not a heavily threaded title, and the CPU’s 3dmark 8-thread score of 5508 versus the max-thread score of 6503 shows that performance gains flatten beyond eight threads. The 12 threads available are more than sufficient for the game’s demands, and the processor’s 32 MB of shared L3 cache helps keep frequently accessed data close to the cores. In broader synthetic tests, the CPU achieves a Cinebench R23 multicore score of 12735 and a single-core score of 1852, placing it in the 78th percentile of all CPUs.

The nearest rivals in the database show this processor’s positioning. The AMD Ryzen 9 6900HX has an average score of 26274, a mere 0.2% lower than the 7600’s 26324. The Intel Core i9-11900KF is 0.4% ahead with a score of 26212, and the AMD Ryzen 5 8540U is 0.5% ahead. These negligible deltas indicate that within this performance tier, CPU choice has minimal impact on Doom’s frame rates, as the game is unlikely to stress any of these processors to their limits.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is the dominant component in this pairing, built on the Ada Lovelace architecture with 7680 shading units and 80 ROPs. Its base clock of 2310 MHz and boost clock of 2610 MHz drive the rendering pipeline, while the 12 GB of GDDR6X memory on a 192-bit bus provides 504.2 GB/s of bandwidth. This memory capacity and bandwidth are crucial at higher resolutions, where texture data and frame buffers expand significantly.

The GPU’s benchmark data shows a Passmark G3D score of 31624, placing it in the 84th percentile of all GPUs. Its nearest rival, the NVIDIA GeForce RTX 5090 Mobile, scores 45152 in the aggregate benchmark, a 0.8% delta. The AMD Radeon Pro 5500 XT scores 45384, 1.3% higher, while the NVIDIA RTX A6000 scores 44075, 1.6% lower. These aggregate scores, however, do not directly translate to Doom’s specific workload, where the measured FPS data provides a clearer picture.

The GPU’s role becomes evident in the resolution scaling. At 1080p Low, the GPU produces 368 FPS, but this drops to 221 FPS at Ultra, a 40% reduction. At 4K, the same settings span from 129 FPS (Low) to 78 FPS (Ultra), a 40% reduction as well. This consistent scaling indicates that the GPU is the primary driver of frame rate changes across settings, with the CPU providing sufficient headroom to avoid becoming a bottleneck.

The 12 GB VRAM capacity is sufficient for Doom’s textures at all tested settings, as evidenced by the smooth frame rate progression without any anomalous dips. The GPU’s memory clock of 1313 MHz (21 Gbps effective) and 504.2 GB/s bandwidth ensure that texture streaming at 4K Ultra does not cause stutter, although the 78 FPS average suggests the compute units are the limiting factor rather than memory bandwidth.

How This Combo Ranks

The combination of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4070 Ti ranks 461st out of 3712 tested combos in Doom, placing it in the top 12.4% of all configurations in the database. This rank reflects the GPU’s strong performance, as the CPU’s 78th percentile standing is elevated by the 84th percentile GPU.

Within the context of the database, this combo outperforms the vast majority of tested systems, but it is not at the absolute top tier. The rank of 461 indicates that there are 460 combos that achieve higher frame rates in Doom, likely featuring higher-end GPUs such as the RTX 4090 or newer generations. However, the measured FPS data shows that this combo already exceeds the refresh rate of most monitors at 1440p and comes close at 4K.

The ranking should be interpreted with the game’s age in mind. Doom is not a demanding title by modern standards, and the RTX 4070 Ti’s raw compute power ensures that even at 4K Ultra, the 78 FPS average is playable. The rank of 461 suggests that while there are faster systems, this combo offers a smooth experience across all tested resolutions, with the 1440p High preset (175 FPS) representing a sweet spot for high-refresh-rate gaming.

FAQ

Q: What is the best resolution and settings combination for this hardware in Doom?

A: The data shows that 2560x1440 with High settings produces a 175 FPS average, which is the best balance of visual quality and frame rate. For 4K, the Medium preset at 112 FPS (minimum 96 FPS) provides the smoothest experience, while 1080p users can run Ultra at 221 FPS without concern.

Q: Is the CPU or GPU the bottleneck in this pairing for Doom?

A: The GPU is the primary determinant of frame rate. The resolution scaling from 1080p Low (368 FPS) to 4K Low (129 FPS) shows a 65% reduction, which is consistent with GPU-bound performance. The CPU’s 6 cores and 12 threads provide ample headroom, as indicated by its 3dmark single-thread score of 999 and 2-thread score of 1938.

Q: How does this combo compare to the nearest rival GPU in the database?

A: The RTX 4070 Ti has an average benchmark score of 44795, while its nearest rival, the RTX 5090 Mobile, scores 45152, a 0.8% difference. This small delta indicates that the RTX 4070 Ti is competitively positioned, but Doom’s specific workload may favor one over the other based on driver optimizations.

Q: Can this combo handle 4K gaming in Doom?

A: Yes, the 4K Ultra preset delivers a 78 FPS average, which is playable. The 4K High preset improves to 95 FPS, and the Medium preset reaches 112 FPS with a minimum of 96 FPS. For a locked 60 FPS experience, even the Ultra preset is sufficient.

Q: What is the frame rate difference between Low and Ultra settings at 1080p?

A: The Low preset produces 368 FPS, while Ultra produces 221 FPS, a difference of 147 FPS (or 40% lower). The High preset at 271 FPS and Medium at 321 FPS show a linear progression, indicating that the GPU has enough headroom to absorb the additional load without significant frame pacing issues.

Q: How does the CPU’s performance affect Doom’s frame rates?

A: The CPU’s single-thread performance (3dmark single-thread score of 999) is sufficient for Doom’s game logic. The 3dmark 8-thread score of 5508 versus max-thread score of 6503 shows that the game does not utilize more than a few threads effectively, so the 7600’s 12 threads are more than adequate.

Measured FPS Breakdown

3840x2160 (4K UHD)

• Ultra: 78 FPS average
• High: 95 FPS average
• Medium: 112 FPS average, 96 FPS minimum, 129 FPS maximum
• Low: 129 FPS average

2560x1440 (1440p)

• Ultra: 143 FPS average
• High: 175 FPS average
• Medium: 208 FPS average, 176 FPS minimum, 239 FPS maximum
• Low: 238 FPS average

1920x1080 (1080p)

• Ultra: 221 FPS average
• High: 271 FPS average
• Medium: 321 FPS average, 273 FPS minimum, 369 FPS maximum
• Low: 368 FPS average

The Medium preset is the only one with recorded minimum and maximum frame rates, providing insight into frame pacing. At 4K Medium, the 96 FPS minimum versus the 112 FPS average indicates a 14% variance, which is acceptable for a fast-paced FPS. At 1080p Medium, the 273 FPS minimum versus 321 FPS average shows a 15% variance, suggesting that the GPU is still pushing high frame rates even under load spikes. The lack of minimum data for other presets means that their frame pacing is not fully characterized, but the consistent average FPS across resolutions indicates stable performance.