Doom

Doom

AVERAGE FPS
39
playable

This combination offers playable performance with an average of 39 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 18 20 23 24
1440p QHD 27 37 42 45
1080p Full HD 46 53 63 75

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 24
3840x2160 Medium 23
3840x2160 High 20
3840x2160 Ultra 18
2560x1440 Low 45
2560x1440 Medium 42
2560x1440 High 37
2560x1440 Ultra 27
1920x1080 Low 75
1920x1080 Medium 63
1920x1080 High 53
1920x1080 Ultra 46

Doom with AMD Ryzen 5 2600 + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis

# Doom — AMD Ryzen 5 2600 + NVIDIA GeForce GTX 1050 Ti

This combination pairs a six-core, twelve-thread AMD Ryzen 5 2600 with a quad-GB NVIDIA GeForce GTX 1050 Ti, a pairing that lands near the very bottom of the database's tested Doom configurations. The combo sits at rank 1672 out of 1681 tested combos, placing it in the bottom percentile of all systems measured for this title. The benchmark data reveals a system that can deliver playable frame rates at 1080p with careful settings, but struggles severely as resolution climbs, with the GPU acting as the dominant constraint throughout the resolution scaling tests.

Resolution Scaling

The measured FPS data shows a steep, consistent drop as resolution increases from 1920x1080 to 3840x2160, with the scaling pattern indicating a clear GPU-bound scenario at higher resolutions. At Low settings, the average frame rate falls from 74.7 FPS at 1080p to 45.3 FPS at 1440p — a 39.4% reduction — and then to 24.4 FPS at 4K, which represents a 67.3% drop from the 1080p baseline. This pattern of diminishing returns as pixel count quadruples is characteristic of a graphics card that is overwhelmed by fill-rate demands.

The scaling behavior differs noticeably across settings tiers. At Ultra settings, the frame rate drops from 46.3 FPS at 1080p to 26.5 FPS at 1440p (a 42.8% decline), then to 18.1 FPS at 4K (a 60.9% drop from 1080p). The High preset shows a similar trajectory: 52.6 FPS at 1080p, 37.3 FPS at 1440p, and 19.8 FPS at 4K. Interestingly, the Low preset exhibits the largest absolute drop between 1080p and 1440p, suggesting that even at reduced settings, the GPU's memory bandwidth and pixel throughput become limiting factors well before 4K resolution.

The data implies that the GTX 1050 Ti's 128-bit memory bus and 112.1 GB/s bandwidth are insufficient for high-resolution rendering in Doom, regardless of the quality preset selected. At 4K, even the best-performing setting (Low at 24.4 FPS) fails to reach 25 FPS, confirming that this resolution is effectively unplayable with this hardware combination. The resolution scaling analysis strongly suggests that the GPU is the primary bottleneck, as the frame rate degradation tracks closely with pixel count increases rather than showing signs of CPU limitation at lower resolutions.

GPU Role

The NVIDIA GeForce GTX 1050 Ti, built on the Pascal architecture with a GP107 chip, contributes a modest set of specifications that directly explain the measured performance ceiling. The GPU operates at a base clock of 1291 MHz and a boost clock of 1392 MHz, with 768 shading units, 48 TMUs, and 32 ROPs. Its 4 GB of GDDR5 memory on a 128-bit bus provides 112.1 GB/s of bandwidth, which is a critical constraint for Doom's texture-heavy environments at higher resolutions.

The GPU's benchmark scores place it in the 30th percentile of all GPUs tested, with an average benchmark score of 5316. Its nearest rivals include the NVIDIA GeForce 930A (deltaPct 0), the GeForce 940M (deltaPct 0.4), and the AMD Radeon R7 240 (deltaPct 0.7), indicating that this card sits in a performance tier alongside entry-level mobile and low-end desktop parts. The 3DMark Steel Nomad DX12 score of 305 and Passmark DirectX 12 score of 26 both reflect the card's limited compute capabilities for modern rendering workloads.

In Doom specifically, the GPU's role becomes evident when examining the settings scaling at a fixed resolution. At 1080p, moving from Low to Medium yields a 15.9 FPS improvement (74.7 to 62.8 — wait, that's a decrease), actually the data shows 74.7 FPS at Low, 62.8 FPS at Medium, 52.6 FPS at High, and 46.3 FPS at Ultra. The performance penalty from Low to Ultra is 28.4 FPS, or 38% of the Low preset's frame rate. This substantial drop indicates that the GPU's texture fill rate and shading throughput are heavily taxed by Doom's higher-quality settings, even at 1080p.

CPU Role

The AMD Ryzen 5 2600 provides six cores and twelve threads, with a base clock of 3.40 GHz and a boost clock of 3.90 GHz. This CPU, based on the Zen+ architecture (Pinnacle Ridge) built on a 12 nm process, offers 16 MB of shared L3 cache and supports dual-channel DDR4 memory with 46.9 GB/s of bandwidth. Its benchmark results show a Cinebench R23 multi-core score of 11186 and a single-core score of 1579, placing it in the 77th percentile of all CPUs tested.

The CPU's nearest rivals in the database include the Intel Core i5-1345U (deltaPct -0.4), AMD Ryzen 5 7530U (deltaPct 0.6), Intel Core i5-11600KF (deltaPct -0.6), and Intel Core i7-10700F (deltaPct 0.7). These close margins in average benchmark scores — all within 0.7% of the Ryzen 5 2600 — suggest that the CPU's processing power is competitive with a range of modern mid-range and even some higher-end mobile parts.

In Doom, the CPU's role appears secondary to the GPU, based on the resolution scaling data. At 1080p Low settings, the system achieves 74.7 FPS, which is a reasonable frame rate that could suggest the CPU is keeping up with the GPU's output. However, the fact that frame rates drop dramatically at 1440p and 4K — even at Low settings — indicates that the GPU becomes the limiting factor well before the CPU's processing capacity is exhausted. The CPU's 12 threads and 3.9 GHz boost clock are likely sufficient to feed the GTX 1050 Ti at most settings, but the data does not allow for isolating CPU-specific bottlenecks in this game.

How This Combo Ranks

With a combo rank of 1672 out of 1681 tested configurations, this AMD Ryzen 5 2600 + GTX 1050 Ti pairing sits in the bottom 0.5% of all tested combos for Doom. This ranking places it alongside the slowest systems in the database, despite the CPU's respectable 77th percentile performance ranking. The disconnect between the CPU's relatively strong standing and the combo's weak overall rank underscores the extent to which the GPU drags down the system's gaming performance.

The data implies that the GTX 1050 Ti is severely mismatched with the Ryzen 5 2600 for this title, as the CPU is capable of far higher frame rates than the GPU can deliver. The measured FPS figures at 1080p Low (74.7 FPS) and 1080p Medium (62.8 FPS) suggest that the CPU has headroom to push beyond these numbers if paired with a more powerful graphics card. The combo's position at rank 1672 out of 1681 indicates that nearly all other tested systems — including those with weaker CPUs but stronger GPUs — outperform this configuration in Doom.

FAQ

Q: What is the best resolution for this combo in Doom?

A: The data shows 1920x1080 as the only resolution where playable frame rates are achieved. At 2560x1440, the best average FPS is 45.3 at Low settings, while at 3840x2160, even Low settings only reach 24.4 FPS.

Q: How much performance is lost when moving from 1080p to 4K?

A: At Low settings, the average frame rate drops from 74.7 FPS at 1080p to 24.4 FPS at 4K, a 67.3% reduction. At Ultra settings, the drop is from 46.3 FPS to 18.1 FPS, a 60.9% reduction.

Q: Which setting preset gives the highest frame rate at 1080p?

A: The Low preset delivers the highest average FPS at 1080p, with 74.7 FPS. Medium follows at 62.8 FPS, High at 52.6 FPS, and Ultra at 46.3 FPS.

Q: Is the CPU or GPU the limiting factor in this game?

A: The resolution scaling data indicates the GPU is the primary bottleneck. The frame rate drops dramatically as resolution increases, even at Low settings, which points to GPU memory bandwidth and pixel throughput constraints rather than CPU processing limits.

Q: How does this combo rank compared to other tested systems?

A: This combo ranks 1672 out of 1681 tested configurations, placing it in the bottom 0.5% of all systems measured for Doom.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: At 2560x1440, Low settings achieve 45.3 FPS while Ultra settings achieve 26.5 FPS, a difference of 18.8 FPS or a 41.5% reduction from Low to Ultra.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution. At 1920x1080, the Low preset provides the smoothest experience at 74.7 FPS, while Medium at 62.8 FPS offers a solid balance of quality and performance. High settings at 52.6 FPS remain playable, but Ultra at 46.3 FPS dips below the 60 FPS threshold that many users consider ideal for a fast-paced FPS.

For 2560x1440, only the Low preset at 45.3 FPS approaches playability, with Medium at 42.0 FPS and High at 37.3 FPS being marginal. Ultra at 26.5 FPS is not recommended for competitive play. At 3840x2160, all settings produce frame rates below 25 FPS, making this resolution unsuitable for this hardware combination in Doom. The data suggests that 1080p with Medium settings (62.8 FPS) represents the best compromise between visual quality and performance for most users.

Measured FPS Breakdown

At 1920x1080, the measured average FPS values are: Low 74.7, Medium 62.8, High 52.6, and Ultra 46.3. The spread from Low to Ultra is 28.4 FPS, with each incremental settings tier costing roughly 8-10 FPS on average.

At 2560x1440, the values are: Low 45.3, Medium 42.0, High 37.3, and Ultra 26.5. The gap between Low and Ultra widens to 18.8 FPS, with Ultra showing a disproportionately large drop compared to High (a 10.8 FPS decrease).

At 3840x2160, the values are: Low 24.4, Medium 22.5, High 19.8, and Ultra 18.1. The total spread narrows to 6.3 FPS, indicating that the GPU is so heavily constrained at this resolution that settings adjustments have limited impact on frame rate. The 4K data reveals that even dropping from Ultra to Low only recovers 6.3 FPS, confirming that the GPU's fundamental throughput limits are the dominant factor at this resolution.

Hardware Specifications

AMD Ryzen 5 2600

Cores / Threads 6 / 12
Base Clock 3400 MHz
Boost Clock 3900 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce GTX 1050 Ti

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1392 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce GTX 1050 Ti in Doom

Resolution Settings Avg FPS
3840x2160 Low 24.4
3840x2160 Medium 22.5
3840x2160 High 19.8
3840x2160 Ultra 18.1
2560x1440 Low 45.3
2560x1440 Medium 42.0
2560x1440 High 37.3
2560x1440 Ultra 26.5
1920x1080 Low 74.7
1920x1080 Medium 62.8
1920x1080 High 52.6
1920x1080 Ultra 46.3

Doom with Ryzen 5 2600 + Other GPUs

See how Doom performs with the same CPU but different graphics cards.

Doom with GTX 1050 Ti + Other CPUs

See how Doom performs with the same GPU but different processors.

Other Games with Ryzen 5 2600 + GTX 1050 Ti

Explore FPS benchmarks for other games using this same hardware combination.