Control

Control

AVERAGE FPS
74
good

This combination provides smooth gameplay with an average of 74 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 38 46 49 66
1440p QHD 54 66 75 103
1080p Full HD 74 83 96 136

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 66
3840x2160 Medium 49
3840x2160 High 46
3840x2160 Ultra 38
2560x1440 Low 103
2560x1440 Medium 75
2560x1440 High 66
2560x1440 Ultra 54
1920x1080 Low 136
1920x1080 Medium 96
1920x1080 High 83
1920x1080 Ultra 74

Control with AMD Ryzen 5 5600G + NVIDIA GeForce GTX 1080 Ti, In-Depth Analysis

Control pairs AMD’s Ryzen 5 5600G with NVIDIA’s GeForce GTX 1080 Ti, a combination that sits in the 947th percentile rank out of 1,636 tested combos for this game. This places the pairing slightly below the median of all tested systems, indicating that while it can handle the game, it is not a top-tier configuration. The data is measured, not estimated, providing a reliable snapshot of how this specific hardware handles Remedy’s action-adventure title.

Resolution Scaling

The measured FPS data reveals a clear and predictable scaling pattern as resolution increases, with the GTX 1080 Ti becoming the dominant bottleneck at higher pixel counts. At 1080p with High settings, the system delivers 83.3 FPS, but this drops by 21% to 65.7 FPS at 1440p, and then by another 30% to 45.9 FPS at 4K. This progression shows that the GPU is struggling to maintain frame rates as pixel count quadruples from 1080p to 4K, with the gap between 1440p and 4K being particularly steep.

The scaling pattern shifts dramatically when looking at Low settings, where the CPU has more headroom to push frames. From 1080p Low at 136.1 FPS, the drop to 1440p Low is 24% (102.9 FPS), and then to 4K Low is 36% (66 FPS). This steeper percentage decline at higher resolutions under Low settings suggests that while the GPU is still the primary limiter, the Ryzen 5 5600G’s six cores are better able to feed the graphics card when visual effects are minimized. The 4K Low result of 66 FPS is actually higher than the 4K High result of 45.9 FPS, indicating that reducing settings provides a 44% performance uplift at the highest resolution.

Ultra settings tell the most telling story about the GPU’s limitations. At 1080p Ultra, the system manages 73.8 FPS, but this falls to 53.5 FPS at 1440p (a 27% drop) and then to 38.1 FPS at 4K (a 29% drop from 1440p). The 4K Ultra result of 38.1 FPS is below the 45.9 FPS seen at 4K High, showing that the GTX 1080 Ti’s 11 GB of GDDR5X memory and 484.4 GB/s bandwidth are insufficient for the game’s most demanding visual settings at that resolution. The data suggests that 1080p is the sweet spot for this combo, with all settings except Ultra staying above 83 FPS.

CPU Role

The AMD Ryzen 5 5600G brings six cores and twelve threads based on the Zen 3 Cezanne architecture, clocking from a 3.90 GHz base to a 4.40 GHz boost. This processor, released in April 2021 with a launch MSRP of $259, demonstrates strong single-thread performance in synthetic benchmarks, scoring 872 in 3DMark single-thread and 2,365 in Cinebench R23 single-core. These numbers indicate the CPU is more than capable of feeding the GTX 1080 Ti in Control, which is not particularly demanding on multi-threaded workloads.

The 5600G’s multi-thread capabilities are solid but not exceptional, with a Cinebench R23 multi-core score of 16,758 and a Geekbench multi-core score of 7,693. In the context of Control, the game’s physics and AI systems benefit from additional threads, but the 12-thread count is sufficient to avoid becoming a limiting factor. The CPU’s percentile ranking of 78 against all CPUs places it well above average, and its nearest rivals include the Intel Core i7-11600H (0.2% ahead) and the Intel Core i7-11800H (0.2% behind), showing it competes with mobile H-series parts despite being a desktop chip.

At 1080p Low settings, the system hits 136.1 FPS, which suggests the CPU is capable of driving high frame rates without bottlenecking. However, the gap between 1080p Low (136.1 FPS) and 1080p High (83.3 FPS) of 63% indicates that the GPU, not the CPU, is the primary constraint when visual settings increase. The Ryzen 5 5600G’s 16 MB of L3 cache and dual-channel DDR4 memory support (51.2 GB/s bandwidth) provide adequate memory bandwidth for Control’s data streaming, but the processor’s PCIe Gen 3 interface (16 lanes) could theoretically limit data transfer to the GPU, though this does not appear to be a practical issue given the measured results.

GPU Role

The NVIDIA GeForce GTX 1080 Ti, based on the GP102 chip and Pascal architecture, is the clear performance driver in this pairing. With 3,584 shading units, 224 texture mapping units, and 88 ROPs, this card was a flagship when released in March 2017 with a launch MSRP of 699 USD. Its 11 GB of GDDR5X memory on a 352-bit bus delivers 484.4 GB/s of bandwidth, and the card boost clocks to 1,582 MHz from a 1,481 MHz base. These specifications translate to 11.34 TFLOPS of FP32 compute, which is substantial for a card now in its end-of-life production status.

The GTX 1080 Ti’s benchmark scores show it performing at the 61st percentile against all GPUs, with a PassMark G3D score of 18,600 and a Geekbench Vulkan score of 83,108. Its nearest rivals are surprisingly close: the NVIDIA GeForce GTX 780 matches it exactly (0% delta), and the AMD Radeon Pro 560X is 0.1% behind, while the NVIDIA TITAN Xp is 1.1% ahead. This tight clustering suggests that the GTX 1080 Ti’s raw performance is competitive with much older and much newer cards, but its age shows in Control’s more demanding settings.

The GPU’s role in Control becomes evident when examining the FPS scaling across settings at each resolution. At 1080p, moving from Low (136.1 FPS) to Medium (96 FPS) to High (83.3 FPS) to Ultra (73.8 FPS) shows a 46% performance penalty from lowest to highest settings. At 4K, the same progression from Low (66 FPS) to Ultra (38.1 FPS) represents a 42% penalty, indicating that the GPU is consistently the limiting factor regardless of resolution. The GTX 1080 Ti’s 250W TDP and dual-slot design are typical for its era, but the card’s 11 GB VRAM is not fully utilized at 4K Ultra, where the 38.1 FPS result suggests compute limitations rather than memory capacity issues are the primary constraint.

FAQ

Q: Can this combo run Control at 60 FPS?

A: Yes, but not at every resolution and setting. At 1080p, the system exceeds 73 FPS on all tested settings including Ultra (73.8 FPS). At 1440p, it reaches 65.7 FPS on High and 74.7 FPS on Medium, but drops to 53.5 FPS on Ultra. At 4K, only Low settings (66 FPS) achieve 60 FPS, while Medium (48.5 FPS), High (45.9 FPS), and Ultra (38.1 FPS) all fall below the threshold.

Q: How does the GTX 1080 Ti compare to its nearest rivals in this game?

A: The data shows the GTX 1080 Ti has an average benchmark score of 19,402, which is virtually identical to the NVIDIA GeForce GTX 780 (19,405, 0% delta) and AMD Radeon Pro 560X (19,426, -0.1% delta). The NVIDIA TITAN Xp scores 19,184, which is 1.1% lower, despite being a higher-tier card in the same generation.

Q: Is the Ryzen 5 5600G a bottleneck for the GTX 1080 Ti?

A: The benchmark data suggests the CPU is not the primary bottleneck. At 1080p Low, the system achieves 136.1 FPS, which is a high frame rate that would expose CPU limitations if they existed. The CPU’s Cinebench R23 single-core score of 2,365 and multi-core score of 16,758 are sufficient for Control’s workload, and the 12-thread configuration handles the game’s threaded tasks without becoming a constraint.

Q: What is the best resolution for this hardware in Control?

A: Based on the measured FPS, 1080p is the most comfortable resolution, with all settings from Low (136.1 FPS) to Ultra (73.8 FPS) delivering playable frame rates. At 1440p, High settings (65.7 FPS) are playable, but Ultra (53.5 FPS) starts to dip below 60. At 4K, only Low settings (66 FPS) maintain smooth performance, making it unsuitable for higher visual quality.

Q: How much performance is lost going from Low to Ultra settings?

A: The penalty varies by resolution. At 1080p, Ultra is 45.8% slower than Low (73.8 vs 136.1 FPS). At 1440p, the penalty is 48% (53.5 vs 102.9 FPS). At 4K, Ultra is 42.3% slower than Low (38.1 vs 66 FPS). This shows that the GPU’s performance ceiling limits the benefit of higher settings at all resolutions.

Q: Does this combo rank well among all tested systems?

A: The combo ranks 947 out of 1,636 tested combinations for Control, placing it in the lower-middle portion of the field. This is consistent with the GTX 1080 Ti’s 61st percentile ranking among all GPUs and the Ryzen 5 5600G’s 78th percentile among all CPUs, indicating that while the parts are individually above average, their combination is not optimized for this specific game.

Measured FPS Breakdown

At 1920x1080, the system delivers its strongest performance across all settings. Low settings produce an average of 136.1 FPS, Medium settings yield 96 FPS, High settings reach 83.3 FPS, and Ultra settings manage 73.8 FPS. The total spread from lowest to highest settings is 62.3 FPS, with each step up in quality costing roughly 15-20% performance. These numbers indicate that 1080p is well within the GPU’s comfort zone, even at the highest visual quality.

Moving to 2560x1440, the frame rates drop noticeably but remain playable. Low settings average 102.9 FPS, which is a 24.4% decrease from 1080p Low. Medium settings produce 74.7 FPS (22.2% lower than 1080p Medium), High settings deliver 65.7 FPS (21.1% lower than 1080p High), and Ultra settings fall to 53.5 FPS (27.5% lower than 1080p Ultra). The 1440p results show that the GTX 1080 Ti still has substantial headroom at lower settings, but Ultra quality begins to strain the GPU.

At 3840x2160, the performance drops become more pronounced, revealing the GPU’s limitations. Low settings average 66 FPS, which is a 35.9% decrease from 1440p Low. Medium settings produce 48.5 FPS (35.1% lower than 1440p Medium), High settings deliver 45.9 FPS (30.1% lower than 1440p High), and Ultra settings bottom out at 38.1 FPS (28.8% lower than 1440p Ultra). The 4K results show that only Low settings maintain a playable frame rate, while High and Ultra dip below 50 FPS, making the game feel less responsive. Across all resolutions, the scaling from Low to Ultra is consistent, with the GPU being the primary determinant of performance at every quality level.

Hardware Specifications

AMD Ryzen 5 5600G

Cores / Threads 6 / 12
Base Clock 3900 MHz
Boost Clock 4400 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce GTX 1080 Ti

VRAM 11 GB GDDR5X
Base Clock —
Boost Clock 1582 MHz MHz
TDP 250 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600G + NVIDIA GeForce GTX 1080 Ti in Control

Resolution Settings Avg FPS
3840x2160 Low 66.0
3840x2160 Medium 48.5
3840x2160 High 45.9
3840x2160 Ultra 38.1
2560x1440 Low 102.9
2560x1440 Medium 74.7
2560x1440 High 65.7
2560x1440 Ultra 53.5
1920x1080 Low 136.1
1920x1080 Medium 96.0
1920x1080 High 83.3
1920x1080 Ultra 73.8

Control with Ryzen 5 5600G + Other GPUs

See how Control performs with the same CPU but different graphics cards.

Control with GTX 1080 Ti + Other CPUs

See how Control performs with the same GPU but different processors.

Other Games with Ryzen 5 5600G + GTX 1080 Ti

Explore FPS benchmarks for other games using this same hardware combination.