Barony

The AMD Ryzen 7 5700G and NVIDIA GeForce RTX 5050 combination delivers a highly capable 1080p experience in Barony, with performance scaling that reveals a clear GPU-bound scenario at higher resolutions. The measured data shows a robust foundation for high-refresh-rate gaming, though the 8 GB VRAM of the RTX 5050 becomes a defining factor at 4K Ultra settings.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent with a GPU-limited workload. At Low settings, the average frame rate falls from 302 FPS at 1920x1080 to 191 FPS at 2560x1440, and then to 100 FPS at 3840x2160. This represents a 36.7% reduction when moving from 1080p to 1440p, and a further 47.6% reduction when stepping up to 4K. The pattern is identical at High settings, where the averages are 193 FPS, 122 FPS, and 64 FPS respectively, showing a similar proportional decline.

The scaling behavior indicates that the RTX 5050's pixel throughput becomes the limiting factor as resolution increases. The GPU's pixel rate of 82.30 GPixel/s and texture rate of 205.8 GTexel/s are being pushed harder at 4K, which explains the dramatic performance drop. The 128-bit memory bus and 320.0 GB/s bandwidth also contribute to this trend, as higher resolutions demand more memory traffic.

At Medium settings, the measured minimum and maximum FPS values provide additional insight. At 4K, the range is 63 to 85 FPS with an average of 74, while at 1440p the range expands to 120 to 163 FPS with an average of 142. At 1080p, the range is 191 to 258 FPS with an average of 225. The widening of the frame time variance at lower resolutions suggests the CPU has more headroom to produce frames, but the GPU is still the primary constraint at 4K.

The Ultra settings row at 4K, averaging 46 FPS, is the only point where the combination dips below the 60 FPS threshold. This highlights that the 8 GB VRAM capacity is likely being saturated, as Ultra presets typically increase texture detail and memory footprint. The gap between Ultra and High at 4K is 18 FPS, which is larger than the 15 FPS gap between High and Medium at that resolution, suggesting a non-linear scaling penalty.

CPU Role

The AMD Ryzen 7 5700G is an 8-core, 16-thread processor based on the Zen 3 architecture, running at a base clock of 3.80 GHz and boost clock of 4.60 GHz. Its benchmark scores show a balanced multi-threaded profile: a Cinebench R23 multi-core score of 12830.5 and single-core score of 1494, with a Geekbench multi-core score of 9950 and single-core score of 1894. The data suggests this CPU is more than sufficient for Barony, a roguelike title that typically does not demand extreme thread counts.

In this game, the CPU's role appears secondary to the GPU. At 1080p Low settings, the 302 FPS average indicates the 5700G can feed frames well beyond what most displays can show. The single-thread performance, rated at 3283 in PassMark, is adequate for the game logic and AI calculations that Barony requires. The 3DMark single-thread score of 899 further confirms that this processor has enough per-core strength to avoid bottlenecking the RTX 5050 at lower resolutions.

The CPU's 16 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are adequate for this workload. Compared to its nearest rivals, the 5700G sits within a narrow band: it is 0.2% behind the Intel Core i9-9900K, 0.4% ahead of the AMD Ryzen AI 7 445, 0.4% behind the Intel Core i5-14400T, and 0.6% ahead of the Intel Core i7-1370P in average benchmark scores. This clustering indicates that the CPU is not a distinguishing factor in this game's performance.

The 65W TDP and 7nm process node from TSMC mean the processor runs efficiently, but the data does not show thermal throttling impacting frame rates. The PassMark multi-thread score of 24419 and the 3DMark 16-thread score of 6629 suggest that even in scenarios where Barony might use multiple threads, the 5700G has ample headroom. The CPU's percentile rank of 79 among all tested CPUs places it in the upper quartile, confirming it is a capable partner for this GPU.

GPU Role

The NVIDIA GeForce RTX 5050 is the dominant factor in this combination's performance. With 8 GB of GDDR6 memory on a 128-bit bus, the GPU has a memory bandwidth of 320.0 GB/s. Its boost clock of 2572 MHz and base clock of 2317 MHz drive 2560 shading units, 80 TMUs, and 32 ROPs. The FP32 compute of 13.17 TFLOPS is the raw processing power available for this game's rendering.

The measured FPS data shows the GPU scaling predictably with settings. At 1080p, the jump from Low (302 FPS) to Medium (225 FPS) to High (193 FPS) to Ultra (138 FPS) is consistent with increasing shader and memory load. The RTX 5050's 66th percentile ranking among all GPUs and an average benchmark score of 21035 place it in the mid-range tier, but its performance in Barony is clearly sufficient for smooth gameplay at most settings.

The VRAM capacity of 8 GB is a critical constraint. At 4K Ultra, the average FPS drops to 46, which is below the playable threshold for many users. The difference between 4K High (64 FPS) and 4K Medium (74 FPS) is only 10 FPS, suggesting that the GPU's compute is not the sole bottleneck — memory bandwidth and capacity play a significant role at this resolution. The 320.0 GB/s bandwidth is spread thinner across more pixels at 4K, and the 8 GB frame buffer may be insufficient for Ultra textures.

Compared to its nearest rivals, the RTX 5050 holds its own. It is 0.6% behind the AMD Radeon RX Vega M GL, 1% behind the AMD Radeon HD 8970M, 1.6% ahead of the AMD Radeon RX 5600 XT, and 1.6% behind the NVIDIA RTX A4000 Mobile in average benchmark scores. These small deltas indicate that the RTX 5050 is a mid-pack performer in its price segment, but the measured game data shows it excels in Barony specifically.

The GPU's 20 RT cores and 80 tensor cores are present but not heavily utilized in a roguelike title like Barony, which is primarily rasterization-based. The DirectX 12 Ultimate support and 12_2 feature level are future-proofing, but the current data shows the GPU's raw rasterization performance is what drives these frame rates.

Settings Recommendations

Based on the measured FPS rows, the optimal experience depends on the target resolution. At 1920x1080, all settings are playable. The High preset delivers 193 FPS average, which is well above the 144Hz refresh rate common on modern monitors. The Ultra preset at 138 FPS still provides a fluid experience, but the 55 FPS gap between High and Ultra suggests diminishing returns. For competitive play, Low at 302 FPS is excessive, but Medium at 225 FPS offers a good balance of visual quality and headroom.

At 2560x1440, the High preset at 122 FPS is the sweet spot. It maintains a 120+ FPS average, which aligns with high-refresh 1440p displays. The Ultra preset at 87 FPS is still playable, but the drop to below 90 FPS may be noticeable to sensitive users. The Medium preset at 142 FPS is also viable, but the visual fidelity difference from High is minimal in this title. Low at 191 FPS is unnecessary unless targeting extreme refresh rates.

At 3840x2160, the choices are more constrained. The Low preset at 100 FPS is the only option that comfortably exceeds 60 FPS. The Medium preset at 74 FPS is acceptable for slower-paced gameplay, but the minimum FPS of 63 indicates occasional dips. The High preset at 64 FPS is borderline, and the Ultra preset at 46 FPS falls below the standard playability threshold. For 4K gaming, users should prioritize Medium or Low settings to maintain frame pacing.

The data shows that the Medium preset provides the most consistent frame times, as evidenced by the available min/max data. At 1080p Medium, the range is 191 to 258 FPS, which is a 67 FPS spread. At 1440p Medium, the range is 120 to 163 FPS, a 43 FPS spread. At 4K Medium, the range is 63 to 85 FPS, a 22 FPS spread. This tightening of variance at higher resolutions suggests the GPU is more consistently loaded, reducing CPU-side frame pacing issues.

How This Combo Ranks

In the database of tested combinations, this specific pairing of the Ryzen 7 5700G and RTX 5050 ranks 1775 out of 2935 combos for Barony. This places it in the 60.5th percentile, meaning it outperforms roughly 60% of all tested systems. The rank reflects the mid-range positioning of both components, with the GPU's percentile (66) slightly higher than the CPU's (79), suggesting the GPU is the more capable component relative to its peers.

The combo's rank is influenced by the CPU's position relative to its rivals. The 5700G sits within 0.6% of its nearest competitors, meaning the choice of CPU has minimal impact on the final ranking. The GPU's performance, however, is more variable, with a 2.2% spread between its nearest rivals. This indicates that the RTX 5050's specific characteristics — 8 GB VRAM and 128-bit bus — are more decisive in determining the combo's standing.

Given that Barony is a roguelike with moderate graphics demands, the combo's rank suggests it is well-suited for the game's requirements. The high frame rates at 1080p and 1440p indicate that this pairing is overqualified for the title's baseline requirements, but the 4K Ultra deficiency prevents it from ranking higher. The combo's position in the lower half of the top 60% suggests that while it is not a top-tier performer, it is far from the bottom of the pack.

The data indicates that this combo would benefit from a GPU upgrade more than a CPU upgrade. The 5700G's benchmark scores show it is competitive with newer processors, while the RTX 5050's 8 GB VRAM is a limiting factor at high resolutions and settings. For users prioritizing Barony performance, the current combination delivers a strong 1080p and 1440p experience with the caveat that 4K Ultra is out of reach.

FAQ

Q: Can this combo run Barony at 60 FPS on 4K?

A: Yes, at Low settings (100 FPS average) and Medium settings (74 FPS average, with minimum of 63 FPS). The High preset is borderline at 64 FPS, but Ultra falls below at 46 FPS.

Q: What is the best resolution for this combination?

A: The data shows 2560x1440 at High settings provides the best balance, with a 122 FPS average. This offers a smooth experience without the performance constraints seen at 4K.

Q: How does the RTX 5050 compare to its closest rivals in this game?

A: The RTX 5050's average benchmark score is 21035, placing it 0.6% behind the AMD Radeon RX Vega M GL (21153), 1% behind the AMD Radeon HD 8970M (21237), 1.6% ahead of the AMD Radeon RX 5600 XT (20713), and 1.6% behind the NVIDIA RTX A4000 Mobile (21379).

Q: Is the Ryzen 7 5700G a bottleneck for the RTX 5050?

A: No. At 1080p Low, the combo achieves 302 FPS, indicating the CPU can feed frames faster than the GPU can render them. The CPU's percentile rank of 79 and single-thread PassMark score of 3283 support this conclusion.

Q: What settings should be avoided for smooth gameplay?

A: The 4K Ultra preset (46 FPS average) and 4K High preset (64 FPS average) are below or near the 60 FPS threshold. Users should avoid these if strict frame pacing is required, as the minimum FPS data is not available for these rows.

Q: Does the 8 GB VRAM impact performance?

A: Yes, particularly at 4K Ultra where the average FPS drops to 46. The 128-bit memory bus and 320.0 GB/s bandwidth are likely saturated at this setting, causing the significant performance drop from High to Ultra at 4K (18 FPS difference).

Measured FPS Breakdown

The complete measured FPS data for this combination in Barony is presented below, organized by resolution and settings.

1920x1080:

• Low: 302 FPS average
• Medium: 225 FPS average (minimum 191 FPS, maximum 258 FPS)
• High: 193 FPS average
• Ultra: 138 FPS average

2560x1440:

• Low: 191 FPS average
• Medium: 142 FPS average (minimum 120 FPS, maximum 163 FPS)
• High: 122 FPS average
• Ultra: 87 FPS average

3840x2160:

• Low: 100 FPS average
• Medium: 74 FPS average (minimum 63 FPS, maximum 85 FPS)
• High: 64 FPS average
• Ultra: 46 FPS average

The data shows a consistent pattern across all resolutions: Low settings provide the highest frame rates, followed by Medium, High, and Ultra in descending order. The gaps between settings widen at higher resolutions, with the difference between Low and Ultra being 164 FPS at 1080p, 104 FPS at 1440p, and 54 FPS at 4K. This indicates that the GPU's resource allocation becomes more strained as pixel count increases.

The Medium preset is the only one with complete min/max data at all three resolutions, providing the most reliable frame time information. The variance between minimum and maximum FPS is 35% at 1080p, 30% at 1440p, and 30% at 4K, suggesting consistent frame pacing across resolutions. The absence of min/max data for other settings means their frame time consistency cannot be verified from the available measurements.

The overall performance profile shows a system capable of excellent 1080p gaming, very good 1440p gaming, and acceptable 4K gaming at lower presets. The RTX 5050's 8 GB VRAM and 320.0 GB/s bandwidth are the most likely limiting factors at 4K, while the Ryzen 7 5700G's 8-core, 16-thread configuration provides ample CPU headroom for this roguelike title.