Barony

The AMD Ryzen 5 5600G pairs with the NVIDIA GeForce RTX 3080 in Barony, a roguelike where the measured frame rates reveal a combination that scales predictably across resolutions and settings. The CPU, a 6-core, 12-thread Zen 3 part with a base clock of 3.90 GHz and boost clock of 4.40 GHz, sits in the 74th percentile of all CPUs. Its average benchmark score of 21088 places it nearly even with rivals like the Intel Core i3-1220P (avg score 21066, deltaPct 0.1) and the Intel Core Ultra 7 256V (avg score 21112, deltaPct -0.1). The GPU, a GA102-based Ampere chip with a boost clock of 1710 MHz, holds the 68th percentile among GPUs. Its average benchmark score of 23172 trails the NVIDIA P106-100 (avg score 23249, deltaPct -0.3) and AMD Radeon Pro Vega 16 (avg score 23250, deltaPct -0.3), but the measured game data shows the combo delivering playable results from 1080p to 4K, albeit with a sharp drop at the highest resolution and settings.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 5 5600G provides 6 cores and 12 threads, a configuration that is more than sufficient for a roguelike like Barony. The Zen 3 architecture, built on a 7 nm process, runs at a base clock of 3.90 GHz and boosts to 4.40 GHz. The CPU’s 16 MB of L3 cache and 512 KB of L2 cache per core help with the frequent procedural generation and entity management common in the genre. Benchmark results indicate the processor’s single-threaded strength is modest: the 3dmark_single_thread score is 872, while the passmark_single_thread score is 3177. Multi-threaded performance is where the 5600G shows more capability, with a cinebench_r23_multicore score of 10551 and a passmark_multithread score of 19717. These numbers suggest the CPU can handle the background simulation tasks in Barony without becoming the primary bottleneck, but the data also shows that at higher resolutions, the GPU takes over as the limiting factor.

The CPU’s performance relative to its nearest rivals is nearly identical. The Intel Core i3-1220P has an average score of 21066, which is 0.1% higher than the 5600G’s 21088. The Intel Core Ultra 7 256V scores 21112, a 0.1% deficit for the AMD part. The AMD Ryzen 5 7530U and Intel Core Ultra 7 155U score 21133 and 21174, respectively, with deltaPct values of -0.2% and -0.4% against the 5600G. These differences are negligible in real-world gaming, and the measured FPS in Barony reflects that: at 1080p Low, the combo hits 238 FPS average, which is far beyond the CPU’s ability to limit most scenarios. However, at 4K Ultra, the average drops to 41 FPS, indicating that the CPU’s role diminishes as resolution increases.

The 5600G includes integrated Radeon Vega 7 graphics, but in this combo, the discrete RTX 3080 handles rendering. The CPU’s memory bandwidth of 51.2 GB/s and dual-channel DDR4 support are sufficient for the game’s data flow, but the PCIe Gen 3 interface (16 lanes) could theoretically limit the GPU’s data transfer. The measured results do not show any obvious stutter or frame pacing issues, as the Medium settings at 1440p produce a min FPS of 108 and max FPS of 146, with an average of 127. The CPU’s 65W TDP is low, but this does not translate to any performance penalty in the data. In Barony, the 5600G appears to provide a stable foundation, with its 6-core layout handling the game’s logic threads without dropping frames even when the GPU is pushing high frame rates at lower resolutions.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 3080 is the dominant component in this pairing. With 10 GB of GDDR6X memory on a 320-bit bus, the GPU delivers a bandwidth of 760.3 GB/s. The memory clock runs at 1188 MHz, with an effective speed of 19 Gbps. The GPU’s base clock is 1440 MHz, boosting to 1710 MHz. These specifications, combined with 8704 shading units, 272 TMUs, and 96 ROPs, allow the RTX 3080 to handle Barony’s voxel-based environments and dynamic lighting with ease. The GPU’s fp32 performance is 29.77 TFLOPS, and its passmark_g3d score is 25086, placing it in the 68th percentile of all GPUs.

The measured FPS data shows the RTX 3080’s capabilities scaling with resolution. At 1080p Low, the average FPS is 238, which is nearly triple the 4K High result of 54 FPS. At 1080p Ultra, the average drops to 113 FPS, while 4K Ultra falls to 41 FPS. This pattern suggests that the GPU is the primary limiter at higher settings and resolutions, as the CPU’s performance remains constant. The VRAM capacity of 10 GB is not an issue in Barony, as the game’s asset sizes are modest for a roguelike, but the data does show that Ultra settings at 4K can strain the GPU’s compute resources. The RTX 3080’s nearest rivals in the benchmark database include the NVIDIA P106-100 (avg score 23249, deltaPct -0.3%) and AMD Radeon RX 6600M (avg score 23273, deltaPct -0.4%), but the measured game performance far exceeds what those scores might suggest, given the RTX 3080’s architectural advantages.

The GPU’s 320W TDP and suggested 700W PSU are notable for system planning, but the benchmark data does not include power draw measurements. The RTX 3080’s end-of-life production status and 2020 release date mean it is a mature product, and the measured FPS in Barony confirms its sustained performance. At 1440p High, the average FPS is 98, which is smooth for a roguelike where quick reactions matter. At 4K Medium, the average of 70 FPS with a min of 60 and max of 81 shows that the GPU can maintain playable frame rates even at high resolutions, though Ultra settings at 4K push the average down to 41 FPS, which may feel sluggish for fast-paced gameplay. The RTX 3080’s 68 RT cores and 272 tensor cores are not directly relevant to Barony’s rendering, but they contribute to the GPU’s overall compute capability, as reflected in its passmark_gpu_compute score of 14397.

FAQ

Q: What is the average FPS for this combo at 1080p Medium settings?

A: The measured average FPS is 193, with a min FPS of 164 and max FPS of 222.

Q: How does the CPU’s benchmark score compare to its nearest rival?

A: The Ryzen 5 5600G has an average benchmark score of 21088, which is 0.1% lower than the Intel Core i3-1220P’s score of 21066, and 0.1% higher than the Intel Core Ultra 7 256V’s score of 21112.

Q: Is the GPU’s VRAM sufficient for 4K gaming in Barony?

A: The RTX 3080 has 10 GB of GDDR6X memory, and the measured data shows playable frame rates at 4K Medium (70 FPS average) and 4K High (54 FPS average), indicating no apparent VRAM limitation.

Q: What is the combo’s rank among all tested combinations in Barony?

A: The combo ranks 2972 out of 3717 tested combos, placing it in the lower half of the database.

Q: At which resolution and settings does the FPS drop below 60 on average?

A: At 4K Ultra, the average FPS is 41, which is the only measured configuration below 60 FPS. All other settings and resolutions maintain averages above 54 FPS.

Q: How does the GPU’s percentile rank compare to the CPU’s?

A: The GPU sits in the 68th percentile of all GPUs, while the CPU sits in the 74th percentile of all CPUs, indicating the CPU is slightly stronger relative to its peers.

Measured FPS Breakdown

The measured data provides a complete picture of how this combo performs across three resolutions and four settings levels. At 1920x1080, the lowest resolution tested, the combo achieves its highest frame rates. Low settings produce an average of 238 FPS, which is the maximum average across all configurations. Medium settings at 1080p yield an average of 193 FPS, with a min of 164 and max of 222. High settings drop the average to 148 FPS, while Ultra settings reduce it further to 113 FPS. These numbers indicate that at 1080p, the combo is largely CPU-bound at lower settings, but the GPU begins to take over as settings increase, with Ultra showing a 52.5% drop from Low.

At 2560x1440, the performance scales down proportionally. Low settings average 157 FPS, which is 34% lower than the 1080p Low result. Medium settings average 127 FPS, with a min of 108 and max of 146, showing a narrower range than at 1080p. High settings average 98 FPS, and Ultra settings average 74 FPS. The drop from 1080p to 1440p is consistent across settings, with an average reduction of approximately 34-40%. This suggests that the GPU is becoming the primary limiter, as the CPU’s performance ceiling is not reached at these frame rates.

At 3840x2160, the highest resolution, the combo’s performance declines significantly. Low settings average 87 FPS, which is still playable but represents a 45% drop from 1080p Low. Medium settings average 70 FPS, with a min of 60 and max of 81, showing that the frame pacing remains stable even under load. High settings average 54 FPS, which is below the 60 FPS threshold often considered ideal for smooth gameplay. Ultra settings average 41 FPS, which is the lowest measured result and may be problematic for a roguelike where reaction time is critical. The data shows a clear pattern: as resolution increases, the GPU’s workload grows, and the frame rate drops accordingly, with the RTX 3080’s 10 GB VRAM and 320-bit bus providing sufficient bandwidth but not unlimited compute power.

How This Combo Ranks

The combo’s rank in Barony is 2972 out of 3717 tested combinations. This places it in the 80th percentile of the database, meaning roughly 20% of tested combos perform worse. However, this rank is lower than what the individual component percentiles might suggest. The CPU’s 74th percentile and GPU’s 68th percentile would imply a mid-to-high tier pairing, but the rank indicates that many other combos in the database achieve better results in this specific game. The discrepancy likely stems from the fact that Barony is not a demanding title, and many lower-end GPUs can achieve high frame rates at lower resolutions, while the RTX 3080’s strengths are less apparent in a game with relatively simple graphics.

The rank of 2972 suggests that the combo is not optimized for Barony’s specific workload. The game’s roguelike genre typically relies on CPU for procedural generation and AI, but the measured FPS shows that the GPU is the bottleneck at higher settings. The combo’s performance at 1080p Low (238 FPS) is excellent, but at 4K Ultra (41 FPS), it falls below what many other combos might achieve with different CPU-GPU balances. The nearestRivals data for the CPU and GPU shows that both components are closely matched to their peers, but Barony’s measured FPS does not correlate directly with synthetic benchmark scores. For example, the GPU’s passmark_g3d score of 25086 is high, but the game’s frame rates are more dependent on resolution scaling than raw compute power.

The rank also reflects the fact that the RTX 3080 is an end-of-life product, and newer GPUs in the database may offer better performance per frame in this title. The combo’s rank of 2972 out of 3717 is not a poor result, but it indicates that for players specifically targeting Barony, other combinations might yield higher frame rates at 4K Ultra. The measured data shows that the combo excels at 1080p and 1440p, where it can push high refresh rates, but at 4K, the GPU’s limitations become apparent. This rank should be interpreted as a data point, not a verdict, as the combo’s performance in other games may differ based on the workload.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the resolution and the player’s preference for frame rate versus visual fidelity. At 1080p, all settings deliver playable frame rates. Low settings at 238 FPS are excessive for most displays, but Medium settings at 193 FPS provide a good balance of visual quality and performance. High settings at 148 FPS are also excellent, and Ultra at 113 FPS remains smooth. For players with a 144Hz monitor, High or Ultra settings at 1080p are recommended, as both exceed the refresh rate threshold.

At 1440p, the recommended settings shift. Low settings at 157 FPS are suitable for high refresh rate monitors, but Medium settings at 127 FPS are a better balance, with a min of 108 FPS ensuring no significant drops. High settings at 98 FPS are still playable, but Ultra at 74 FPS may cause noticeable frame pacing issues in fast-paced combat. The data suggests that Medium or High settings at 1440p provide the best experience, as they maintain frame rates above 90 FPS while preserving visual detail.

At 4K, the recommendations are more constrained. Low settings at 87 FPS are the only configuration that exceeds 60 FPS, making it the safest choice for smooth gameplay. Medium settings at 70 FPS are also acceptable, with a min of 60 FPS ensuring no major stutters. High settings at 54 FPS are borderline, and Ultra at 41 FPS is not recommended for a roguelike where quick reactions are essential. For 4K players, the data indicates that Medium settings strike the best balance between visual quality and performance, as the average of 70 FPS is above the 60 FPS threshold, and the max of 81 FPS provides headroom. Low settings are the only option for players who prioritize frame rate above all else at 4K.

Resolution Scaling

The FPS drop from 1080p to 4K reveals the limiting component in this combo. At Low settings, the average FPS decreases from 238 at 1080p to 157 at 1440p (a 34% drop) and then to 87 at 4K (a 45% drop from 1440p). This pattern is consistent across all settings, with the percentage drop from 1080p to 4K being 63% for Low (238 to 87), 64% for Medium (193 to 70), 63% for High (148 to 54), and 64% for Ultra (113 to 41). The near-constant percentage drop indicates that the GPU is the primary limiter at all resolutions, as the CPU’s performance does not scale with resolution.

The data shows that the RTX 3080’s compute resources are being saturated as resolution increases. At 1080p, the GPU can render frames faster than the CPU can feed it, resulting in frame rates that exceed 200 FPS at Low settings. At 4K, the GPU’s shading units and ROPs are working at full capacity, and the frame rate drops to 41 FPS at Ultra. The CPU’s role is minimal in this scaling, as its 6-core, 12-thread configuration provides consistent performance regardless of resolution. The 3dmark_max_threads score of 5455 and passmark_multithread score of 19717 indicate that the CPU can handle the game’s logic without bottlenecking, even at 238 FPS.

The resolution scaling also highlights the GPU’s memory bandwidth. At 4K, the RTX 3080’s 760.3 GB/s bandwidth is sufficient for the game’s textures, but the 10 GB VRAM capacity may become a factor at Ultra settings. The measured FPS at 4K Ultra (41 FPS) is significantly lower than at 4K Medium (70 FPS), suggesting that the Ultra settings increase the GPU’s workload beyond what the memory subsystem can efficiently handle. However, the data does not include VRAM usage, so this interpretation is speculative. What is clear is that the combo’s performance scales linearly with resolution, and the GPU is the dominant factor in determining frame rates. For players seeking higher FPS at 4K, reducing settings from Ultra to Medium yields a 71% increase in average FPS, from 41 to 70. At 1440p, the same settings reduction increases average FPS by 72%, from 74 to 127. This consistent improvement indicates that the GPU’s compute capability, not the CPU, is the limiting factor in this pairing.