Barony

The AMD Ryzen 5 5600GT paired with the NVIDIA GeForce RTX 3080 delivers a wide spread of frame rates in Barony, ranging from a very playable 68 FPS at 4K Ultra to a staggering 449 FPS at 1080p Low. The data shows a system with substantial headroom, where the limiting factor shifts from the GPU at high resolutions to the CPU at lower ones. This analysis breaks down the measured performance across resolutions and settings, contextualizes the combo's standing, and examines the roles of each component.

Resolution Scaling

The frame rate data reveals a classic scaling pattern that highlights the balance between the CPU and GPU. Moving from 1920x1080 to 2560x1440, the average FPS drops by approximately 37% across all settings. For instance, at High settings, the frame rate falls from 287 FPS at 1080p to 181 FPS at 1440p. This significant drop indicates that the GPU is beginning to take on more of the rendering load, but the system is still producing high frame rates that are far from being a bottleneck.

The most pronounced scaling occurs when moving from 2560x1440 to 3840x2160. At High settings, the average FPS drops from 181 to 95, a reduction of about 48%. This near-halving of performance is a clear sign that the RTX 3080's rendering capabilities are now the primary constraint. The GPU's 10 GB of GDDR6X memory and 760.3 GB/s of bandwidth are being pushed harder, and the pixel throughput demands of 4K are taking their toll. This is the resolution where the graphics card's architecture is fully exercised.

At 1080p, the frame rates are exceptionally high across all presets, suggesting that the CPU is the limiting component. The Ryzen 5 5600GT, with its 6 cores and 12 threads, must feed the GPU with draw calls and game logic. The data implies that at this resolution, the GPU has spare capacity, and the measured FPS is determined by how quickly the CPU can process the frame. The jump from 334 FPS at Medium to 449 FPS at Low at 1080p is a 34% increase, which is much larger than the corresponding jumps at higher resolutions, further indicating a CPU-bound scenario at 1080p.

The scaling from Medium to Low settings also provides insight. At 4K, the difference between Medium (110 FPS) and Low (148 FPS) is a 35% performance gain, showing that reducing graphical fidelity can substantially alleviate GPU pressure. At 1440p, the same comparison shows a gain from 211 to 284 FPS, a 35% increase as well. This consistency suggests that the GPU is the primary bottleneck at these resolutions, as lowering settings directly translates to higher frame rates. The scaling from High to Ultra is also telling, with a drop of 28% at 4K (95 to 68 FPS) and 28% at 1440p (181 to 130 FPS), reinforcing that the GPU is the limiting factor at these higher resolutions.

How This Combo Ranks

In the database of tested combinations for Barony, this specific pairing of the Ryzen 5 5600GT and the RTX 3080 achieves a rank of 1065 out of 3717 combos. This places it in the top 29% of all tested configurations, indicating a performance level that is well above the median. The percentile ranking for the GPU is 68, meaning it outperforms 68% of all GPUs in the database, while the CPU has a percentile ranking of 74, outperforming 74% of all CPUs.

The combo's rank is a result of the synergy between these two components. The RTX 3080's high average benchmark score of 23172 is complemented by the Ryzen 5 5600GT's average score of 20733. The nearest rivals for the CPU include the Intel Core i5-12490F with a deltaPct of -0.3 and the Intel Xeon 6325P with a deltaPct of -0.4, showing that the 5600GT is statistically tied with these processors in synthetic benchmarks. This means that the CPU is not a weak link in the chain, and it is capable of supporting the GPU's performance in most scenarios.

The rank of 1065 suggests that while this combo is strong, there are many other combinations that deliver higher frame rates in Barony. This is likely due to the fact that the game may be more sensitive to single-threaded performance or other architectural features that favor newer or higher-clocked CPUs. However, the data shows that this combo is far from a slouch, delivering frame rates that are more than sufficient for smooth gameplay at all but the most demanding settings and resolutions.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend heavily on the target resolution and desired frame rate. For players with a 4K display, the High preset provides an average of 95 FPS, which is a solid, playable experience. The Medium preset offers a higher average of 110 FPS with a minimum of 94 FPS, making it the better choice for those who prioritize a smoother experience over maximum visual fidelity. The Ultra preset drops to 68 FPS, which may be acceptable for slower-paced games but is less ideal for a roguelike where quick reactions are often needed.

For 1440p displays, the High preset delivers an excellent 181 FPS average, which is well above the threshold for high-refresh-rate monitors. The Medium preset is even more compelling, offering 211 FPS with a minimum of 179 FPS, ensuring that even the most intense moments maintain high frame rates. The Ultra preset at 130 FPS is also very playable and provides the best visual quality. The data suggests that High or Medium are the sweet spots for a balance of visuals and performance at this resolution.

At 1080p, all settings produce frame rates that far exceed the refresh rate of most monitors. The Low preset achieves 449 FPS, while the Medium preset reaches 334 FPS. The Ultra preset still delivers a very high 206 FPS. Given the abundance of performance, players can comfortably select the Ultra preset at 1080p to get the best visual experience without worrying about frame rate drops. The minimum FPS recorded at 1080p Medium is 284, which is still exceptionally high, indicating that the system maintains consistent performance even in demanding scenes.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the system's performance across all combinations of resolution and settings. At 1920x1080, the average FPS ranges from 449 at Low to 206 at Ultra. The Medium preset shows an average of 334 FPS with a minimum of 284 and a maximum of 384. The High preset averages 287 FPS. These numbers indicate a system that is massively overpowered for 1080p gaming, leaving significant headroom for future titles or more demanding scenarios.

Moving to 2560x1440, the average FPS scales down. The Low preset averages 284 FPS, Medium averages 211 FPS with a minimum of 179, High averages 181 FPS, and Ultra averages 130 FPS. The consistent 35% drop from Medium to Low and a 28% drop from High to Ultra mirrors the scaling seen at 4K, reinforcing the GPU's role as the primary bottleneck at this resolution. The minimum FPS of 179 at Medium ensures that there are no significant frame hitches.

At 3840x2160, the average FPS drops further. The Low preset averages 148 FPS, Medium averages 110 FPS with a minimum of 94, High averages 95 FPS, and Ultra averages 68 FPS. The gap between Low and Medium is 38 FPS, while the gap between High and Ultra is 27 FPS. This shows that the GPU is working hardest at this resolution, and the differences between presets become more pronounced as the pixel count increases.

GPU Role

The NVIDIA GeForce RTX 3080 is the primary driver of performance at higher resolutions in Barony. Its 10 GB of GDDR6X memory and 320-bit bus width provide a memory bandwidth of 760.3 GB/s, which is crucial for handling the textures and geometry at 4K. The GPU's 8704 shading units and 272 texture mapping units allow it to process the game's visuals at a high rate. The boost clock of 1710 MHz and base clock of 1440 MHz provide the raw processing speed needed to maintain the frame rates seen in the data.

The GPU's percentile rank of 68 indicates that it is a high-performing part, but it is not at the very top of the database. Its average benchmark score of 23172 is slightly lower than its nearest rivals, such as the NVIDIA P106-100 with a deltaPct of -0.3 and the AMD Radeon Pro Vega 16 with a deltaPct of -0.3. This suggests that while the RTX 3080 is powerful, other parts in its class offer marginally different performance profiles. In Barony, the GPU's role becomes more critical as resolution increases. The data shows that at 1080p, the GPU has headroom, but at 4K, it is fully utilized, with frame rates dropping to 68 FPS at Ultra settings.

FAQ

Q: What is the highest average frame rate achieved by this combo in Barony?

A: The highest average frame rate recorded is 449 FPS, achieved at 1920x1080 resolution with Low settings.

Q: Is this combo capable of running Barony at 4K with playable frame rates?

A: Yes, the data shows an average of 95 FPS at 4K with High settings and 110 FPS with Medium settings, both of which are playable.

Q: How does the CPU's performance compare to its closest rivals?

A: The Ryzen 5 5600GT's average benchmark score is 20733, which is nearly identical to the Intel Core i5-12490F (20802, deltaPct -0.3) and the Intel Xeon 6325P (20821, deltaPct -0.4).

Q: What is the minimum FPS recorded at 1440p with Medium settings?

A: The minimum FPS recorded at 2560x1440 with Medium settings is 179 FPS.

Q: What is the combo's rank among all tested combinations in this game?

A: The combo ranks 1065 out of 3717 tested combinations, placing it in the top 29% of all systems.

Q: What is the GPU's memory configuration?

A: The RTX 3080 features 10 GB of GDDR6X memory with a 320-bit bus width and a memory bandwidth of 760.3 GB/s.

CPU Role

The AMD Ryzen 5 5600GT plays a critical role in ensuring the GPU is adequately fed, especially at lower resolutions. With 6 cores and 12 threads based on the Zen 3 architecture, it provides a solid foundation for gaming. The CPU's boost clock of 4.60 GHz and base clock of 3.60 GHz are key metrics that influence its performance. Its 16 MB of L3 cache helps reduce latency when accessing frequently used data.

The CPU's percentile rank of 74 indicates that it outperforms 74% of all CPUs in the database. Its average benchmark score of 20733 is competitive with its nearest rivals, showing it is not a bottleneck. In Barony, the CPU's performance is most apparent at 1080p, where frame rates reach up to 449 FPS at Low settings. This high frame rate is only possible if the CPU can process the game's logic and issue draw calls faster than the GPU can render them.

The CPU's 7 nm process node and 65 W TDP are notable for efficiency. The data shows that the CPU is capable of keeping up with the RTX 3080, as evidenced by the high frame rates at 1080p. However, the combo's overall rank of 1065 suggests that there are CPUs with better single-threaded performance or more cores that could push frame rates even higher in this game. The Ryzen 5 5600GT is a capable partner, but the data indicates that the system's performance is ultimately limited by the GPU at higher resolutions and by the CPU's absolute throughput at lower resolutions.