Barony

The AMD Ryzen 5 5600F and NVIDIA GeForce RTX 2060 combination delivers a playable experience in Barony, a roguelike title from 2015, with measured frame rates that scale predictably across resolutions and settings. The data shows a system that is well-balanced for this game, with the CPU providing a strong foundation and the GPU becoming the primary constraint at higher resolutions. This analysis examines the benchmark results, contextualizes them against the component specifications, and offers guidance on optimal settings.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer. It operates with a base clock of 3.00 GHz and a boost clock of 4.00 GHz, and the benchmark data indicates a strong single-thread score of 2872 on the PassMark single-thread test. This is relevant for Barony, a roguelike that typically relies on game logic, procedural generation, and AI calculations, which often favor higher single-core performance over massive multi-core parallelism. The processor’s multithread score of 19236 and integer math score of 59339 suggest ample headroom for background tasks, but the game’s frame rate at lower resolutions will likely hinge on how quickly the CPU can process turn-based events and world updates.

In the measured results, at 1080p Low settings, the combo achieves an average of 261 FPS. This high frame rate implies that the CPU is not a bottleneck at this resolution and settings level; the Ryzen 5 5600F is capable of feeding frames well beyond typical display refresh rates. The processor’s 32 MB of shared L3 cache and dual-channel DDR4 memory support with a bandwidth of 51.2 GB/s contribute to low-latency access to game data, which is beneficial for the frequent state changes in roguelike gameplay. The 4.00 GHz boost clock allows for rapid execution of single-threaded game logic, and the 85th percentile ranking among all CPUs in benchmark scores further underscores its capability relative to the broader market.

However, the data also shows that as resolution increases to 1440p and 4K, the average FPS drops significantly even at the same settings, suggesting the graphics card begins to take on a larger role. For instance, at High settings, the average FPS falls from 167 at 1080p to 105 at 1440p, and then to 55 at 4K. This pattern indicates that while the CPU is strong, it is not the limiting factor in these higher-resolution scenarios; the GPU’s workload becomes dominant. The Ryzen 5 5600F’s performance is sufficient to avoid capping frame rates in most tested configurations, as evidenced by the fact that the highest measured average (261 FPS) occurs at the lowest resolution and settings, where CPU load is typically highest relative to GPU load. The processor’s PassMark data compression score of 232836 and extended instructions score of 16266 also point to a well-rounded compute capability that can handle the game’s logic without introducing noticeable stutter.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 5 5600F and NVIDIA GeForce RTX 2060 is ranked 2308 out of 2935 tested combos for Barony. This places the combo in the lower-middle portion of the ranking, which is somewhat surprising given the strong individual component benchmarks. The CPU’s percentile of 85 versus all CPUs and the GPU’s percentile of 58 versus all GPUs might suggest a higher overall ranking, but the combo rank indicates that many other pairings achieve better performance in this specific game.

The ranking data implies that while this system is fully capable of running Barony, there are numerous other combinations that deliver higher average frame rates across the tested settings. The GPU’s nearest rivals include the NVIDIA GeForce GTX 580 with a deltaPct of 0, the AMD Radeon 680M at 0.1, the NVIDIA GeForce RTX 3050 OEM at 0.6, and the AMD Radeon RX 7600 at 0.8. These deltas are all extremely small, meaning the RTX 2060’s average benchmark score of 15290 is nearly identical to those of its closest competitors. This suggests that the GPU is not uniquely positioned to excel in Barony; many comparable graphics cards will produce similar results. For the CPU, the nearest rivals are the Intel Core Ultra 5 225 with a deltaPct of 0, the AMD Ryzen 5 5500X3D at -0.2, the AMD Ryzen AI 7 PRO 450 at -0.4, and the Intel Core i9-12900T at -0.5. Again, these deltas are minimal, indicating that the Ryzen 5 5600F’s processing power is on par with several other mid-range and even high-end chips for this game’s workload.

The rank of 2308 out of 2935 suggests that the bottleneck in this combo’s performance might be the GPU, as the CPU is relatively stronger (85th percentile) compared to the GPU (58th percentile). In a game like Barony, which may not be heavily threaded but does demand consistent rendering, the GPU’s 6 GB of VRAM and 336.0 GB/s bandwidth could be limiting at higher resolutions. The measured FPS data supports this: at 4K Ultra, the average drops to 39 FPS, which is below the generally accepted smooth threshold, indicating the GPU struggles with the highest settings at that resolution. The combo’s rank reflects that many other GPU pairings, possibly with more VRAM or higher compute throughput, achieve better results in the same scenarios.

FAQ

*Q: What is the highest average frame rate achieved by this combo in Barony?*

A: The highest measured average frame rate is 261 FPS, which occurs at 1920x1080 resolution with Low settings.

Q: How does the combo perform at 4K resolution with Ultra settings?

A: At 3840x2160 with Ultra settings, the average frame rate drops to 39 FPS, which is the lowest measured result across all tested configurations.

Q: Is the CPU or GPU more likely to limit performance at 1080p?

A: At 1080p, the CPU appears to handle the workload well, as the average frame rates are high (167 FPS at High, 194 at Medium, 261 at Low). The data suggests the GPU is not saturated at this resolution, allowing the CPU’s performance to shine.

Q: What is the difference in average FPS between 1080p and 4K at Medium settings?

A: The average frame rate at 1080p Medium is 194 FPS, while at 4K Medium it is 64 FPS, representing a drop of 130 FPS as resolution increases.

Q: How does this combo compare to its nearest GPU rivals in benchmark scores?

A: The RTX 2060 has an average benchmark score of 15290, with nearest rivals like the NVIDIA GeForce GTX 580 at 15283 (deltaPct 0), AMD Radeon 680M at 15270 (deltaPct 0.1), and NVIDIA GeForce RTX 3050 OEM at 15199 (deltaPct 0.6), showing very small performance differences.

Q: Does the combo’s rank in the game improve at lower resolutions?

A: The combo rank of 2308 out of 2935 is a static metric for the entire tested set; however, the measured FPS data shows that at 1080p, the combo achieves much higher frame rates (e.g., 167 FPS at High) than at 4K (55 FPS at High), indicating relative performance is better at lower resolutions.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data provides a comprehensive view of how this combo handles Barony across three resolutions and four settings presets. At 1920x1080, the performance is consistently high. With Low settings, the average FPS is 261, which is the fastest result in the entire dataset. Medium settings yield an average of 194 FPS, with a minimum of 165 and a maximum of 224. High settings produce an average of 167 FPS, and Ultra settings drop to an average of 120 FPS. This shows a clear scaling pattern: as settings increase, the frame rate decreases, but even at Ultra, the average remains well above 60 FPS, indicating a smooth experience.

Moving to 2560x1440, the frame rates decrease but remain respectable. Low settings achieve an average of 165 FPS, which is still very high. Medium settings average 123 FPS, with a minimum of 104 and maximum of 141. High settings produce an average of 105 FPS, and Ultra settings average 76 FPS. The drop from 1080p to 1440p is significant—for example, at High settings, the average falls from 167 to 105 FPS, a reduction of 62 FPS. This suggests that the GPU is being pushed harder, as the increased pixel count demands more from the graphics card.

At 3840x2160, the performance becomes more variable and, in some cases, falls below the 60 FPS threshold. Low settings average 86 FPS, which is still playable. Medium settings average 64 FPS, with a minimum of 55 and maximum of 74, indicating occasional dips below smooth levels. High settings average 55 FPS, and Ultra settings average 39 FPS, which would be noticeably choppy. The difference between 1440p and 4K is substantial—at Medium settings, the average drops from 123 to 64 FPS, a 59 FPS decrease. This pattern highlights that 4K resolution is demanding for this combo, particularly at higher settings, and users may need to compromise on quality to maintain acceptable frame rates.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 2060 is based on the Turing architecture, with a chip codenamed TU106, and was released in January 2019. It features 6 GB of GDDR6 memory on a 192-bit bus, providing a bandwidth of 336.0 GB/s. The GPU has a base clock of 1365 MHz and a boost clock of 1680 MHz, with memory clocked at 1750 MHz (14 Gbps effective). These specifications are fundamental to understanding its performance in Barony. The 6 GB VRAM capacity is adequate for a roguelike game from 2015, which likely does not have large texture packs or complex shaders that would exhaust memory at 1080p or 1440p. However, at 4K Ultra settings, the GPU’s pixel rate of 80.64 GPixel/s and texture rate of 201.6 GTexel/s may be insufficient to maintain high frame rates, as evidenced by the 39 FPS average.

The GPU’s compute capabilities, including 1920 shading units, 120 TMUs, and 48 ROPs, are in line with its mid-range positioning. The FP32 performance of 6.451 TFLOPS provides adequate processing power for the game’s rendering tasks, but the data shows that at 4K, the GPU becomes the limiting factor. For instance, at 4K Medium, the average FPS is 64, which is close to the 55 FPS at 4K High, suggesting that the GPU is struggling to keep up with the pixel workload regardless of minor settings changes. The GPU’s benchmark scores reflect its overall capability: a PassMark G3D score of 14111 and a DirectX 12 score of 53, with a 58th percentile ranking among all GPUs. This percentile is lower than the CPU’s 85th percentile, reinforcing that the GPU is the weaker link in this combo for Barony.

The RTX 2060’s TDP of 160 W and suggested PSU of 450 W indicate it is a power-efficient card for its performance class. Its support for DirectX 12 Ultimate and Vulkan 1.4 ensures compatibility with modern APIs, though Barony’s age means it may not fully utilize these features. The GPU’s memory bandwidth of 336.0 GB/s is sufficient for the game’s data transfer needs, but at 4K, the sheer number of pixels to render overwhelms the GPU’s throughput, leading to the observed frame rate drops. In contrast, at 1080p, the GPU has more headroom, allowing the CPU to push higher frame rates, as seen with the 261 FPS average at Low settings.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the optimal settings depend on the user’s resolution and preference for frame rate versus visual quality. At 1920x1080, all settings presets offer playable performance, but for the best balance, Medium settings appear ideal. The average FPS at 1080p Medium is 194, with a minimum of 165 and maximum of 224, ensuring a consistently smooth experience without the visual compromises of Low settings. High settings at 1080p also perform well at 167 FPS, but the jump to Ultra drops to 120 FPS, which is still smooth but represents a 47 FPS decrease from Medium. Given that Barony is a roguelike, where gameplay clarity and responsiveness are key, Medium or High settings at 1080p provide a good mix of visual fidelity and performance.

At 2560x1440, Medium settings are again the sweet spot, with an average of 123 FPS and a minimum of 104, which remains comfortably above 60 FPS. High settings at 1440p average 105 FPS, also smooth, but Low settings at 165 FPS offer a higher frame rate for competitive play if needed. Ultra at 1440p averages 76 FPS, which is acceptable but may have occasional dips. For most users, Medium at 1440p is recommended, as it delivers high frame rates while maintaining better visual quality than Low.

At 3840x2160, the recommendations shift due to performance constraints. Low settings average 86 FPS, which is the only preset at 4K that consistently exceeds 60 FPS. Medium settings average 64 FPS, with a minimum of 55, meaning some scenes may drop below 60 FPS. High settings average 55 FPS, and Ultra averages 39 FPS, both of which are likely to produce noticeable stutter. For a smooth 4K experience, Low settings are the best choice, as they provide the highest average frame rate (86 FPS) and likely better visual clarity than dropping resolution. If visual quality is prioritized and occasional dips are acceptable, Medium at 4K is viable, but the data suggests that Low is the safest option for maintaining playability.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The resolution scaling data reveals a clear trend: as resolution increases, average frame rates decrease substantially, and this pattern indicates the GPU is the primary limiting component at higher resolutions. From 1080p to 1440p, the average FPS at High settings drops from 167 to 105, a reduction of 62 FPS or approximately 37%. At Medium settings, the drop is from 194 to 123, a 71 FPS decrease. From 1440p to 4K, the decline is even steeper: High settings fall from 105 to 55 FPS (a 50 FPS drop), and Medium settings fall from 123 to 64 FPS (a 59 FPS drop). This non-linear scaling, where the drop accelerates at higher resolutions, is characteristic of a GPU-bound scenario. The CPU’s performance remains relatively constant across resolutions, so the frame rate differences are driven by the GPU’s ability to render more pixels.

At 1080p, the CPU is likely the more active component, as the GPU has spare capacity. This is supported by the high frame rates (e.g., 261 FPS at Low), which suggest that the CPU’s single-thread performance (2872 PassMark score) is sufficient to drive the game’s logic at very high speeds. As resolution increases to 1440p and 4K, the GPU’s workload grows, and its limitations become apparent. The RTX 2060’s 6 GB VRAM and 336.0 GB/s bandwidth are not overwhelmed at 1080p, but at 4K, the rendering demands exceed the GPU’s compute and memory throughput, leading to the observed frame rate drops. The 4K Medium average of 64 FPS, with a minimum of 55, shows that the GPU is struggling to maintain consistent performance.

This scaling behavior suggests that for Barony, the combo is CPU-limited at 1080p but becomes GPU-limited at 1440p and especially at 4K. The CPU’s high percentile ranking (85th) and strong single-thread score mean it can keep up with the game’s logic even as resolution increases, but the GPU’s lower percentile (58th) and modest benchmark scores (e.g., PassMark G3D of 14111) make it the bottleneck at higher pixel counts. Users with a 1080p monitor will find this combo well-suited, as it delivers high frame rates across all settings. For 1440p, the combo remains capable with Medium or High settings. At 4K, however, users must accept Low settings to achieve smooth performance, as higher presets result in frame rates below 60 FPS. The data ultimately shows a balanced system for 1080p gaming, with the GPU becoming the limiting factor as resolution scales up.