Archeage

Archeage

AVERAGE FPS
123
excellent

This combination delivers exceptional performance with an average of 123 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 58 85 95
1440p QHD 69 101 148 166
1080p Full HD 102 149 220 247

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 95
3840x2160 Medium 85
3840x2160 High 58
3840x2160 Ultra 39
2560x1440 Low 166
2560x1440 Medium 148
2560x1440 High 101
2560x1440 Ultra 69
1920x1080 Low 247
1920x1080 Medium 220
1920x1080 High 149
1920x1080 Ultra 102

Archeage with AMD Ryzen 7 9850X3D + NVIDIA GeForce RTX 4070 Ti, In-Depth Analysis

Archeage, the 2014 MMORPG, presents an interesting case study for the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 4070 Ti combination. The measured FPS data reveals a system that is highly capable but whose performance is heavily dictated by the graphics settings and resolution chosen, rather than being a uniform powerhouse across the board. This analysis breaks down the measured results to understand the balance between the CPU and GPU workload in this specific title.

Resolution Scaling

The FPS drop from 1080p to 4K is significant and tells a clear story about where the performance bottleneck lies. At 1080p with Low settings, the system achieves an average of 247 FPS. Moving to 1440p at the same Low preset, the average drops to 166 FPS, a substantial reduction. At 4K Low, the average plummets further to 95 FPS. This scaling pattern indicates that at lower resolutions, the graphics card is not the primary limiting factor; the CPU is capable of feeding it frames faster than it can render them.

The trend becomes even more pronounced when examining the higher settings. At 1080p High, the average is 149 FPS. At 1440p High, it is 101 FPS, and at 4K High, it falls to 58 FPS. This near-linear scaling with pixel count suggests that as resolution increases, the GPU's rendering workload becomes the dominant constraint. The 4K Ultra setting, which yields a 39 FPS average, is the clearest example of the GPU being pushed to its absolute limit, resulting in a frame rate that is less than half of what is achieved at 1080p Ultra (102 FPS).

This data suggests a classic dual-bottleneck scenario. At 1080p and 1440p, especially with Low or Medium presets, the system is often CPU-bound or limited by other engine overhead, allowing the GPU to produce very high frame rates. However, the jump to 4K, even at Medium settings (85 FPS), shows a significant performance penalty, confirming that the RTX 4070 Ti's rendering capabilities are the limiting factor at that resolution. The scaling from 1440p to 4K is particularly steep, indicating that the GPU's fillrate and memory bandwidth are being saturated.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is built on the Ada Lovelace architecture and features 12 GB of GDDR6X memory on a 192-bit bus, providing a bandwidth of 504.2 GB/s. The measured FPS data directly reflects the GPU's workload. The most telling comparison is between the Medium and Ultra presets at each resolution. At 1440p, the Medium preset achieves 148 FPS, while Ultra drops to 69 FPS. At 4K, this gap widens, with Medium at 85 FPS and Ultra at just 39 FPS. This performance halving suggests that the Ultra preset introduces effects that are particularly demanding on the GPU's compute and memory subsystems.

The GPU's clock speeds, with a base of 2310 MHz and a boost of 2610 MHz, are consistent across the board, so the performance differences are not due to clock variability but rather the amount of work being sent to the processor. The data shows that the RTX 4070 Ti can handle Archeage very comfortably at 1080p and 1440p, with even the High preset at 1440p (101 FPS) providing a smooth experience. However, the 4K results, particularly the 39 FPS average on Ultra, demonstrate that this card is not suited for maximum settings at that resolution in this game, likely due to the combination of high-resolution textures and demanding post-processing effects.

The VRAM capacity of 12 GB appears sufficient for the measured configurations, as the system is able to load and run the game at all tested settings without encountering a hard crash or stutter that would be indicated by a min FPS of zero. The benchmark results indicate that the GPU is a strong performer for this title, but its limits are clearly defined by the resolution and preset combination.

How This Combo Ranks

In the database of tested combinations, the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 4070 Ti pair is ranked 306 out of 2761 tested combos for Archeage. This places it in the top 11% of all tested systems, indicating a very strong overall performance level. The high rank reflects the synergy between the powerful CPU and the capable GPU, even if the 4K Ultra performance is not ideal.

This rank is particularly impressive when considering the GPU's individual standing. The RTX 4070 Ti has a percentile rank of 84 among all GPUs, meaning it is better than 84% of them. However, this GPU percentile is lower than the combo's overall rank, which suggests that the CPU is helping to boost the system's performance beyond what the GPU alone would suggest, particularly in the lower-resolution tests. The CPU's own percentile rank is 92, which is higher than the GPU's, reinforcing the idea that the processor is a strong partner that can keep up with the graphics card's demands.

The combo's rank of 306 out of 2761 shows that while many systems are faster, a large majority are slower. This places the configuration in a high-performance tier, suitable for competitive and high-refresh-rate gaming at 1440p and for a solid 4K experience at reduced settings. The data shows that this pairing is well-balanced for most scenarios, with the only significant weakness being the inability to maintain high frame rates at 4K with the Ultra preset.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend entirely on the user's target resolution and refresh rate. For 1080p gaming, the High preset provides an excellent average of 149 FPS, which is ideal for high-refresh-rate monitors. The Medium preset offers an even higher 220 FPS for those seeking maximum competitive performance, while the Low preset reaches 247 FPS. The Ultra preset, at 102 FPS, is also perfectly playable but offers diminishing returns over High.

At 1440p, the High preset is the recommended sweet spot, delivering a strong 101 FPS average. This balances visual fidelity with a smooth, responsive experience. The Medium preset at 148 FPS is also excellent for high-refresh displays, but the visual quality step down from High might be noticeable. The Ultra preset at 69 FPS is playable but may not be smooth enough for fast-paced action, and the drop from High is substantial.

For 4K, the data clearly shows that the Ultra preset is not a viable option, with a 39 FPS average that will feel stuttery. The High preset, at 58 FPS, is on the edge of playability, but the Medium preset is the recommended choice. At 85 FPS, it provides a much smoother experience that is far better suited for 4K gaming. The Low preset at 95 FPS is also viable, but the Medium preset offers a better visual experience for the relatively small FPS cost. In summary, for a balanced experience, the High preset at 1440p and the Medium preset at 4K are the most efficient choices based on the measured data.

FAQ

Q: What is the best resolution for this CPU and GPU combo in Archeage?

A: Based on the data, 2560x1440 provides the best balance of visual quality and high frame rates. The High preset at this resolution achieves 101 FPS, which is smooth and visually appealing, while the Medium preset reaches 148 FPS for a more competitive edge.

Q: Can this system run Archeage at 4K?

A: Yes, but not at maximum settings. The 4K Medium preset achieves an average of 85 FPS, which is playable, while the 4K High preset drops to 58 FPS. The 4K Ultra preset is not recommended, as it only manages a 39 FPS average.

Q: Should I use the Ultra preset for the best graphics?

A: The Ultra preset provides the highest visual fidelity, but it comes with a significant performance cost. At 1080p, it delivers 102 FPS, but at 1440p it drops to 69 FPS, and at 4K it falls to an unplayable 39 FPS. The High or Medium presets are often better choices for a smoother experience.

Q: How does the CPU performance affect the game's frame rates?

A: The AMD Ryzen 7 9850X3D, with its high single-thread performance (a Cinebench R23 single-core score of 2228) and 8 cores, ensures that the game is not CPU-bottlenecked at lower resolutions. This is evident in the low FPS at 1080p Low (247 FPS), which indicates the CPU is capable of processing frames much faster than the GPU can render them.

Q: Is the 12 GB of VRAM on the RTX 4070 Ti enough for Archeage?

A: The measured data suggests it is sufficient. The system successfully ran the game at all tested settings and resolutions without any indication of VRAM-related issues, such as severe stuttering or crashes. The performance drops at 4K are more likely due to the GPU's raw processing power rather than memory capacity.

Q: How does this combo compare to other tested systems?

A: The combo ranks 306 out of 2761 tested combinations for Archeage, placing it in the top 11% of all systems. This high ranking indicates that the pairing of the Ryzen 7 9850X3D and the RTX 4070 Ti is a very strong performer for this specific game.

CPU Role

The AMD Ryzen 7 9850X3D is a Zen 5 architecture processor with 8 cores and 16 threads, capable of boosting up to 5.60 GHz. The measured FPS data shows that this CPU provides a very strong foundation for Archeage. The most compelling evidence is the 1080p Low result, which averages 247 FPS. This very high frame rate suggests that the CPU is not a bottleneck at this resolution and setting, as the game's logic and draw calls can be processed quickly enough to feed the GPU.

The CPU's large 96 MB of shared L3 cache is likely a significant factor here, as MMORPGs often have large amounts of game data that need to be accessed quickly. The benchmark results for the CPU, including a Passmark single-thread score of 4704 and a Cinebench R23 multi-core score of 22807, support its capability. The system's high rank in the game (306 out of 2761) is partly due to this powerful CPU, which helps maintain high frame rates in CPU-bound scenarios, such as crowded areas or complex scenes that are common in MMOs.

However, the CPU's role becomes less prominent at higher resolutions. As the resolution increases to 4K, the GPU becomes the limiting factor, and the FPS drops significantly. This indicates that while the CPU is powerful enough to handle the game's logical demands, the RTX 4070 Ti cannot keep up with the increased pixel rendering workload. The data shows a well-balanced system where the CPU is strong enough to avoid holding back the GPU at 1080p and 1440p, but the GPU's performance ceiling is the primary constraint at 4K.

Measured FPS Breakdown

1920x1080 (1080p)

  • Low: The average FPS is 247, the highest of any tested configuration.
  • Medium: The average FPS is 220, with min and max FPS of 187 and 253, respectively, showing strong performance consistency.
  • High: The average FPS is 149, a significant drop from Medium but still very smooth.
  • Ultra: The average FPS is 102, which is the lowest at this resolution but still a playable frame rate.

2560x1440 (1440p)

  • Low: The average FPS is 166, a substantial decrease from the 1080p result but still very high.
  • Medium: The average FPS is 148, with min and max FPS of 126 and 170, respectively.
  • High: The average FPS is 101, a solid result that is well-suited for high-refresh-rate gaming.
  • Ultra: The average FPS is 69, a notable drop that makes this setting less desirable for competitive play.

3840x2160 (4K)

  • Low: The average FPS is 95, which is the only 4K setting to break the 90 FPS barrier.
  • Medium: The average FPS is 85, with min and max FPS of 72 and 97, respectively, providing a reasonably smooth experience.
  • High: The average FPS is 58, which is on the edge of smooth playability and may be noticeable in fast-paced action.
  • Ultra: The average FPS is 39, the lowest of all tests, making this setting impractical for a fluid gaming experience.

The data shows a clear and consistent pattern: frame rates scale down as resolution and settings increase. The 1080p and 1440p results are excellent for high-refresh monitors, while the 4K results require a compromise in settings to achieve playable frame rates. The difference between the Medium and Ultra presets is particularly stark, showing that the Ultra preset is significantly more demanding on the GPU across all resolutions.

Hardware Specifications

AMD Ryzen 7 9850X3D

Cores / Threads 8 / 16
Base Clock 4700 MHz
Boost Clock 5600 MHz
TDP 120W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 4070 Ti

VRAM 12 GB GDDR6X
Base Clock —
Boost Clock 2610 MHz MHz
TDP 285 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 9850X3D + NVIDIA GeForce RTX 4070 Ti in Archeage

Resolution Settings Avg FPS
3840x2160 Low 95.0
3840x2160 Medium 85.0
3840x2160 High 58.0
3840x2160 Ultra 39.0
2560x1440 Low 166.0
2560x1440 Medium 148.0
2560x1440 High 101.0
2560x1440 Ultra 69.0
1920x1080 Low 247.0
1920x1080 Medium 220.0
1920x1080 High 149.0
1920x1080 Ultra 102.0

Archeage with Ryzen 7 9850X3D + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RTX 4070 Ti + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with Ryzen 7 9850X3D + RTX 4070 Ti

Explore FPS benchmarks for other games using this same hardware combination.