Archeage

Archeage is an older MMORPG, but its engine can still stress modern hardware, particularly at higher resolutions and settings. The measured data for the AMD Ryzen 7 5800XT paired with the AMD Radeon RX 7600 shows a configuration that is capable of smooth play at 1080p, but which struggles to maintain high frame rates at 4K. The pattern across the resolution and settings matrix reveals a system where the graphics card becomes the primary bottleneck as pixel count increases, while the processor provides ample headroom in less demanding scenarios.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and clearly indicates where the performance ceiling lies. At 1080p with Low settings, the combo achieves 133.2 FPS. Moving to 1440p at the same Low preset, the average falls to 89.4 FPS, a reduction of roughly 33%. At 4K Low, the average drops further to 50 FPS, which is only about 37.5% of the 1080p Low result. This scaling pattern is typical of a GPU-bound scenario: the RX 7600’s 8 GB of GDDR6 memory and 128-bit bus simply cannot feed the frame buffer fast enough when the pixel load quadruples from 1080p to 4K.

The situation becomes more pronounced at higher quality presets. At High settings, the 1080p average is 82.1 FPS, while 1440p High yields 54.8 FPS and 4K High falls to 30.2 FPS. The Ultra preset is the most demanding, with 54.7 FPS at 1080p, 33.6 FPS at 1440p, and just 22 FPS at 4K. The data shows that the gap between 1080p and 1440p is consistently around 27-33 FPS across all presets, but the 1440p to 4K drop is even larger in absolute terms for Low and Medium. For example, 1440p Medium runs at 78.9 FPS, while 4K Medium manages only 44.4 FPS, a loss of 34.5 FPS.

What this scaling says about the limiting component is straightforward. At 1080p, the CPU still has influence, as evidenced by the fact that Low settings (133.2 FPS) far exceed High (82.1 FPS). The Ryzen 7 5800XT has enough single-thread performance to push well beyond 100 FPS in this title. However, the moment resolution increases, the GPU’s fill rate and memory bandwidth become the binding constraint. The 4K results, regardless of preset, stay below 50 FPS, and even the fastest preset (Low at 4K) only reaches 50 FPS. This suggests that for 4K play, the RX 7600 is the definitive limiting factor, and no amount of CPU headroom can compensate for the GPU’s pixel throughput limitations.

CPU Role

The AMD Ryzen 7 5800XT is a Zen 3 part with 8 cores and 16 threads, base clock of 3.80 GHz and boost clock of 4.80 GHz. Its benchmark results place it in the 86th percentile of all CPUs, with an average benchmark score of 29774. In Archeage, the CPU’s role appears to be secondary to the GPU at higher resolutions, but it still determines the maximum achievable frame rate at 1080p.

Looking at the CPU’s synthetic performance, the Cinebench R23 multicore score is 23794 and single-core is 3359. The 3DMark single-thread score is 959, while 16-thread and max-thread scores are 7683 and 7680 respectively. These numbers indicate a processor with strong per-core performance, which is relevant for an MMORPG like Archeage that often relies on a few heavily loaded threads for game logic and network handling. The Passmark single-thread score of 3538 and multithread score of 27988 reinforce this picture.

Relative to its nearest rivals, the 5800XT is essentially tied. The AMD Ryzen 7 PRO 5755GE scores 29740, a delta of just 0.1% lower. The AMD Ryzen 7 6800HS scores 29856, which is 0.3% higher. The AMD Ryzen AI 7 PRO 360 comes in at 29682 (0.3% lower), and the AMD Ryzen 7 7840H at 29868 (0.3% higher). These differences are within noise, meaning the 5800XT offers no meaningful advantage or disadvantage over these alternatives in general compute. However, none of these rivals are directly measured in Archeage, so their specific in-game performance is unknown.

In practice, the 1080p Low result of 133.2 FPS suggests the CPU can drive frame rates well above 120 FPS when the GPU is not saturated. The 1080p Medium result of 118.3 FPS and High of 82.1 FPS show that as GPU load increases, the CPU becomes less relevant. The fact that 1080p Low is 62% faster than 1080p High points to the GPU being the primary limiter even at 1080p once settings go above Low. For a player with a 144Hz monitor, this CPU will not be the bottleneck; the RX 7600 will be.

GPU Role

The AMD Radeon RX 7600 is built on the RDNA 3.0 architecture with the Navi 33 chip, featuring 2048 shading units, 128 TMUs, and 64 ROPs. Its memory configuration is 8 GB of GDDR6 on a 128-bit bus with 288.0 GB/s bandwidth. The boost clock is 2655 MHz, with a game clock of 2250 MHz. These specs place it in the 63rd percentile of all GPUs, with an average benchmark score of 20258.

The GPU’s synthetic results show a mixed picture. In 3DMark Steel Nomad DX12, it scores 2310. Passmark G3D gives 16634, and Geekbench Vulkan yields 90825. The Passmark DirectX 11 score of 172 and DirectX 12 score of 58 suggest that the card’s performance varies significantly by API and workload. For Archeage, which is an older title, the DirectX 11 result may be more relevant, but the measured FPS data provides the clearest indication.

The RX 7600’s nearest rivals in the database are very close in average score. The RX 7600 XT scores 20146 (0.6% lower), the RX 460 scores 20088 (0.8% lower), and the RTX 3070 Mobile scores 20534 (1.3% higher). The Intel Arc B570 scores 20556 (1.5% higher). These deltas are all under 2%, meaning the RX 7600 performs essentially on par with these cards in aggregate benchmarks. However, in Archeage specifically, the measured FPS tells the real story.

The GPU’s 8 GB VRAM is a critical detail. At 4K Ultra, the combo only reaches 22 FPS, and 4K Medium is 44.4 FPS. While VRAM capacity alone does not explain all of this—the 128-bit bus and 288 GB/s bandwidth are also limiting—the combination of high resolution and high settings likely pushes against the 8 GB limit. The fact that 4K Low (50 FPS) is only 12.6% faster than 4K Medium (44.4 FPS) suggests that texture quality and memory usage are not the only constraints; raw compute and fill rate are also insufficient. The card’s pixel rate of 169.9 GPixel/s and texture rate of 339.8 GTexel/s are moderate for a 2023 GPU, but they are not enough to handle 8.3 million pixels at 4K with demanding effects.

How This Combo Ranks

In the database of tested combos for Archeage, this pairing of Ryzen 7 5800XT and RX 7600 ranks 1144 out of 1727 total combinations. That places it in the 66th percentile of all tested combos, meaning roughly one-third of configurations perform worse, and two-thirds perform better. Given that the CPU is in the 86th percentile and the GPU in the 63rd percentile, the combo rank is closer to the GPU’s percentile, which aligns with the earlier finding that the GPU is the performance limiter.

The rank of 1144 suggests that while this is not a top-tier setup, it is also not a weak one. In an MMORPG like Archeage, where player counts and world events can cause frame rate dips, having a combo in the upper third of all tested systems is a reasonable position. The gap between the CPU’s high percentile and the GPU’s lower one means that the system is unbalanced for this game: the processor is overqualified for the GPU’s output at higher resolutions. For 1080p play, the rank might be higher in practice, but the aggregate rank reflects all resolutions and settings.

Settings Recommendations

Based on the measured FPS rows, the best experience depends on the target resolution and frame rate. For 1080p, the Medium preset delivers 118.3 FPS, which is close to the Low preset’s 133.2 FPS but with better visual quality. High at 1080p drops to 82.1 FPS, which is still playable but not ideal for high-refresh monitors. Ultra at 1080p is 54.7 FPS, which is too low for smooth gameplay in a fast-paced MMORPG. Therefore, at 1080p, Medium is the recommended preset: it retains 118 FPS average while offering improved textures and effects over Low.

At 1440p, the options narrow. Low gives 89.4 FPS, which is smooth, while Medium gives 78.9 FPS, which is also playable. High at 1440p is 54.8 FPS, which is borderline for a competitive MMORPG, and Ultra is 33.6 FPS, which is not recommended. For a 60Hz monitor at 1440p, Medium is the best choice, as it provides 78.9 FPS with a decent visual uplift over Low. If the player prefers maximum frame rate, Low at 89.4 FPS is acceptable.

At 4K, the situation is challenging. The only preset that approaches 60 FPS is Low, with 50 FPS. Medium is 44.4 FPS, High is 30.2 FPS, and Ultra is 22 FPS. For 4K, the data suggests that Low is the only viable option for playable frame rates, and even then, it falls short of 60 FPS. Players who insist on 4K should lower the resolution or accept sub-60 FPS performance. Given that the combo ranks in the 66th percentile for this game, the settings recommendation is to prioritize 1080p Medium for the best balance of visual quality and frame rate, or 1440p Low/Medium if a larger display is preferred.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: Based on the measured data, 1080p is the best resolution. The combo achieves 133.2 FPS at Low, 118.3 FPS at Medium, and 82.1 FPS at High. At 1440p, the highest average is 89.4 FPS (Low), and at 4K, the highest is 50 FPS (Low), so 1080p provides the most headroom.

Q: Can this system run Archeage at 4K smoothly?

A: Not with the measured settings. At 4K, the best result is 50 FPS on Low, with Medium at 44.4 FPS, High at 30.2 FPS, and Ultra at 22 FPS. None of these reach a consistent 60 FPS, so 4K smooth play is not achievable with this combo.

Q: Which preset should I use at 1080p?

A: Medium is recommended. It provides 118.3 FPS average, which is only 14.9 FPS lower than Low but with better graphics. High drops to 82.1 FPS and Ultra to 54.7 FPS, making Medium the sweet spot.

Q: Is the CPU or GPU the bottleneck in this game?

A: The data shows the GPU is the primary bottleneck at resolutions above 1080p. At 1080p Low, the CPU can push 133.2 FPS, but as settings increase or resolution rises, the RX 7600’s limitations become evident. The GPU ranks in the 63rd percentile, while the CPU is in the 86th percentile.

Q: How does this combo rank compared to other tested systems?

A: It ranks 1144 out of 1727 combos, placing it in the upper third of all tested configurations. This rank is closer to the GPU’s percentile (63rd) than the CPU’s (86th), confirming that the graphics card is the limiting factor.

Q: What is the highest FPS recorded for this combo?

A: The highest average FPS in the measured data is 133.2 FPS, achieved at 1920x1080 with Low settings. The lowest is 22 FPS at 3840x2160 with Ultra settings.