Archeage

# Archeage with AMD Ryzen 7 5800X3D + NVIDIA GeForce RTX 5090 D

The AMD Ryzen 7 5800X3D pairs with the NVIDIA GeForce RTX 5090 D to deliver a broad spread of frame rates in Archeage, ranging from 52 FPS at 4K Ultra to 215 FPS at 1080p Low. This combination ranks 117th out of 2,761 tested combos in this game, placing it in the top 4.2% of all configurations. The 8-core, 16-thread Zen 3 processor with 96 MB of shared L3 cache provides a strong foundation, while the Blackwell 2.0 GPU with 32 GB of GDDR7 memory ensures that resolution scaling follows a predictable pattern. The data reveals that this pairing is far more GPU-limited at higher resolutions, while the CPU's single-thread performance becomes a factor at 1080p.

Resolution Scaling

The measured FPS shows a clear and consistent drop as resolution increases across all four settings presets. At High settings, the average frame rate falls from 178 FPS at 1920x1080 to 132 FPS at 2560x1440, then further to 76 FPS at 3840x2160. This represents a 26% reduction from 1080p to 1440p and another 42% reduction from 1440p to 4K, resulting in an overall 57% drop from 1080p to 4K. The pattern indicates that the RTX 5090 D's rendering workload scales almost linearly with pixel count, which is typical for a GPU-bound scenario in an MMORPG.

At Low settings, the scaling is less severe in percentage terms but still substantial. The average FPS goes from 215 at 1080p to 188 at 1440p (a 13% drop) and then to 125 at 4K (a 34% drop from 1440p). The total reduction from 1080p to 4K at Low settings is 42%. This smaller percentage drop compared to High settings suggests that at Low, the CPU begins to exert more influence on the frame rate, particularly at 1080p where the 215 FPS figure approaches the practical limits of the Ryzen 7 5800X3D's single-thread capability.

Medium settings follow a similar trajectory: 207 FPS at 1080p, 181 FPS at 1440p, and 112 FPS at 4K. The 1080p-to-1440p drop is 13%, while the 1440p-to-4K drop is 38%. Ultra settings show the steepest relative decline, with 134 FPS at 1080p dropping to 90 FPS at 1440p (33% reduction) and then to 52 FPS at 4K (42% reduction from 1440p). The 4K Ultra result of 52 FPS is the only measured configuration that falls below the 60 FPS threshold, highlighting how demanding the Ultra preset becomes at maximum resolution.

The scaling analysis reveals that at 1080p, the differences between Low (215 FPS), Medium (207 FPS), and High (178 FPS) are relatively modest, suggesting that the CPU is the limiting factor in this range. At 4K, however, the spread between Low (125 FPS) and Ultra (52 FPS) is much wider, confirming that the GPU becomes the primary bottleneck as resolution increases. The RTX 5090 D's 32 GB of GDDR7 memory on a 512-bit bus provides 1.79 TB/s of bandwidth, which is more than sufficient for 4K textures, so the FPS drops are driven by compute load rather than memory constraints.

CPU Role

The AMD Ryzen 7 5800X3D is an 8-core, 16-thread processor based on the Zen 3 architecture (Vermeer), with a base clock of 3.40 GHz and a boost clock of 4.50 GHz. Its defining feature is the 96 MB of shared L3 cache, which is substantially larger than typical desktop processors and helps in MMO scenarios where repeated data access patterns benefit from larger caches. The processor's benchmark scores reflect a balanced profile: a single-thread score of 884 in 3DMark, 1,452 in Cinebench R23, and 2,017 in Geekbench, while multi-threaded scores reach 7,285 in 3DMark max threads, 14,317 in Cinebench R23, and 11,765 in Geekbench.

In Archeage, the CPU's role becomes evident when examining the FPS differences between settings at the same resolution. At 1080p, going from Low to Medium only reduces average FPS from 215 to 207, a mere 4% drop, while High brings it down to 178 (a 17% drop from Low). This relatively small penalty for increasing graphical load indicates that the CPU is keeping up with the GPU's output, but the gap between High and Ultra (178 vs 134 FPS, a 25% drop) suggests that the Ultra preset introduces CPU-intensive effects that the 5800X3D's single-thread performance cannot fully mask.

The processor's single-thread scores are particularly relevant here. With a 3DMark single-thread score of 884 and a Passmark single-thread score of 3,234, the 5800X3D sits at the 80th percentile compared to all CPUs. Its nearest rivals include the AMD Ryzen 7 6800U (average score 27,887, 0% delta) and Intel Core i9-10900K (27,872, 0.1% delta), showing that the 5800X3D is competitive with these parts but not dominant in general compute. However, the 96 MB L3 cache is an asset for Archeage's MMO workloads, where the game's asset streaming and character data benefit from larger cache residency.

At 1440p, the CPU headroom becomes more apparent. Low (188 FPS) and Medium (181 FPS) are nearly identical, with only a 4% difference, while High (132 FPS) and Ultra (90 FPS) show larger gaps of 30% and 50% respectively from Low. This pattern indicates that at 1440p, the GPU is becoming the bottleneck at higher settings, while the CPU still has capacity at lower settings. At 4K, all settings show a wider spread (125, 112, 76, and 52 FPS), confirming that the GPU is the dominant limiting factor at this resolution.

The processor's 16 threads are fully utilized in multithreaded workloads, as evidenced by the 3DMark 16-thread score of 7,299 and max-thread score of 7,285, which are nearly identical. This suggests that Archeage does not scale beyond 16 threads, or that the 5800X3D's additional cache compensates for any thread scaling limitations. The Passmark multithread score of 28,309 and physics score of 2,884 further indicate that the CPU has ample compute capacity for game logic and physics at all measured settings.

Settings Recommendations

Based on the measured FPS rows, the Medium preset offers the best balance between visual quality and performance across all three resolutions. At 1080p Medium, the average FPS is 207, with a minimum of 176 and maximum of 238, providing a smooth experience well above any display refresh rate. At 1440p Medium, the average is 181 FPS with a minimum of 154, which still exceeds the 144 Hz refresh rate common on high-end monitors. Even at 4K Medium, the average of 112 FPS with a minimum of 95 ensures that gameplay remains fluid, with only rare dips below 100 FPS.

For users prioritizing maximum frame rates, Low settings deliver the highest averages: 215 FPS at 1080p, 188 FPS at 1440p, and 125 FPS at 4K. The jump from Low to Medium at 1080p costs only 8 FPS (from 215 to 207), making Medium the clear choice unless every last frame matters. At 1440p, the Medium advantage is even clearer, with only a 7 FPS difference (188 vs 181) while providing improved visuals. At 4K, the gap widens to 13 FPS (125 vs 112), but the Medium preset still maintains a comfortable margin above 60 FPS.

High settings are a viable middle ground for those who want better image quality without the heaviest effects. At 1080p High, the 178 FPS average is still excellent for competitive play, while 1440p High at 132 FPS suits 120 Hz monitors well. At 4K High, the 76 FPS average falls short of 144 Hz but remains playable on standard 60 Hz displays. The Ultra preset is only recommended for users with 1080p displays, where the 134 FPS average is still strong, or for those who prioritize visual fidelity over frame rate at 1440p (90 FPS) and accept 52 FPS at 4K.

The data suggests that Medium is the "sweet spot" for this combination. The minimum FPS values at Medium (176 at 1080p, 154 at 1440p, 95 at 4K) are all well above the corresponding minimums for other presets, indicating consistent frame pacing without sudden drops. The maximum FPS values (238 at 1080p, 208 at 1440p, 128 at 4K) show that the hardware has headroom for burst moments, such as large party fights or area transitions.

How This Combo Ranks

This AMD Ryzen 7 5800X3D + NVIDIA GeForce RTX 5090 D combination ranks 117th out of 2,761 tested combos in Archeage, placing it in the top 4.2% of all configurations. This ranking is strong but not near the top, which is surprising given the RTX 5090 D's position as a flagship GPU with a 92nd percentile ranking among all GPUs. The explanation lies in the CPU's performance class: the 5800X3D scores at the 80th percentile among CPUs, and its average benchmark score of 27,896 places it roughly on par with the AMD Ryzen 7 6800U (27,887, 0% delta) and Intel Core i9-10900K (27,872, 0.1% delta), while slightly trailing the AMD Ryzen AI 5 PRO 340 (27,932, -0.1% delta).

The GPU's own ranking tells a more nuanced story. The RTX 5090 D has an average benchmark score of 77,712 and sits at the 92nd percentile, with nearest rivals including the AMD Radeon RX 6650M XT (76,904, 1.1% delta) and AMD Radeon RX 6850M XT (78,940, -1.6% delta). This means that while the GPU is a top-tier part, its performance in Archeage is partially held back by the CPU's single-thread capabilities, particularly at lower resolutions where the CPU has a larger influence.

The 117th rank out of 2,761 suggests that there are 116 combinations that achieve higher average FPS in this game, likely featuring newer CPUs with higher single-thread performance. The 5800X3D's boost clock of 4.50 GHz is respectable, but its single-thread 3DMark score of 884 is modest compared to what newer architectures achieve. The processor's 7 nm process node and 74 mm² die size, with 8,850 million transistors, reflect a design optimized for cache rather than raw clock speed.

For context, the combo rank is computed across all tested configurations, which includes different CPU-GPU pairings. The fact that this combo ranks 117th despite the GPU's high standing indicates that Archeage's frame rates are not solely GPU-bound. The game's MMO nature, with many on-screen characters and complex UI elements, places significant demand on CPU processing, and the 5800X3D's 96 MB L3 cache helps but cannot fully compensate for its older architecture compared to the latest Ryzen 7000/9000 or Intel 13th/14th gen parts.

FAQ

Q: What is the highest average FPS achieved by this combo in Archeage?

A: The highest measured average FPS is 215, achieved at 1920x1080 resolution with Low settings. The next highest is 207 FPS at 1080p Medium, followed by 188 FPS at 1440p Low.

Q: Can this combo maintain 60+ FPS at 4K resolution?

A: Yes, at High, Medium, and Low settings. The 4K averages are 76 FPS (High), 112 FPS (Medium), and 125 FPS (Low). Only 4K Ultra falls below 60 FPS, with an average of 52 FPS.

Q: How does the Ryzen 7 5800X3D compare to its nearest CPU rivals in general benchmarks?

A: The 5800X3D has an average benchmark score of 27,896. It is essentially tied with the AMD Ryzen 7 6800U (27,887, 0% delta) and Intel Core i9-10900K (27,872, 0.1% delta), while being 0.1% behind the AMD Ryzen AI 5 PRO 340 (27,932).

Q: Which settings preset shows the smallest FPS drop when moving from 1080p to 1440p?

A: Low settings show the smallest relative drop, going from 215 FPS at 1080p to 188 FPS at 1440p, a 13% reduction. Medium settings also drop 13% (207 to 181 FPS), while High drops 26% (178 to 132 FPS) and Ultra drops 33% (134 to 90 FPS).

Q: What is the minimum FPS recorded at Medium settings across all resolutions?

A: The minimum FPS values at Medium are 176 at 1080p, 154 at 1440p, and 95 at 4K. These represent the lowest measured frame rates, which are all well above the 60 FPS threshold.

Q: How does this combo's rank in Archeage compare to its overall hardware percentile rankings?

A: The combo ranks 117th out of 2,761 tested combinations (top 4.2%). The GPU alone sits at the 92nd percentile among all GPUs, while the CPU is at the 80th percentile among all CPUs, indicating that the CPU is the limiting factor for this combo's overall rank in Archeage.

Measured FPS Breakdown

1920x1080 (1080p):

• Low: 215 FPS average
• Medium: 207 FPS average, minimum 176 FPS, maximum 238 FPS
• High: 178 FPS average
• Ultra: 134 FPS average

At 1080p, the frame rates are consistently high across all settings. The spread from Low to Ultra is 81 FPS (215 vs 134), with the largest single-step drop occurring between High and Ultra (44 FPS, from 178 to 134). The Medium preset offers the most balanced performance, with a minimum of 176 FPS ensuring no noticeable stutter even in busy scenes.

2560x1440 (1440p):

• Low: 188 FPS average
• Medium: 181 FPS average, minimum 154 FPS, maximum 208 FPS
• High: 132 FPS average
• Ultra: 90 FPS average

At 1440p, the FPS levels remain strong but show a wider spread. Low and Medium are nearly identical (188 vs 181), while High drops to 132 FPS and Ultra falls to 90 FPS. The Medium preset's minimum of 154 FPS is particularly impressive, as it means the frame rate rarely dips below what a 144 Hz monitor can display.

3840x2160 (4K):

• Low: 125 FPS average
• Medium: 112 FPS average, minimum 95 FPS, maximum 128 FPS
• High: 76 FPS average
• Ultra: 52 FPS average

At 4K, the GPU becomes the dominant factor. Low and Medium maintain playable frame rates (125 and 112 FPS), while High drops to 76 FPS and Ultra falls to 52 FPS. The Medium preset's minimum of 95 FPS is the only 4K configuration that stays above 90 FPS, making it the recommended choice for high-refresh 4K monitors.

The data across all resolutions and settings shows a consistent pattern: Medium settings provide the best combination of visual fidelity and performance, with minimum FPS values that are at least 76% of the average. The Ultra preset is the most demanding, costing between 24% (at 1080p) and 58% (at 4K) of the average FPS compared to Low settings. High settings offer a middle ground, with 4K High being the only configuration (besides 4K Ultra) that falls below 100 FPS average, at 76 FPS.