Archeage

The AMD Ryzen 7 5800X3D and NVIDIA GeForce RTX 5090 combination delivers a broad performance envelope in Archeage, with frame rates ranging from playable at 4K Ultra to exceptionally high at 1080p Low. The data shows a clear pattern where resolution scaling has a dramatic effect on the GPU load, while the CPU maintains a relatively stable foundation across lower resolutions.

Resolution Scaling

The measured FPS data reveals a significant shift in system behavior as resolution increases. At 1920x1080, the combo achieves 217.9 FPS on Low settings, but this drops to 179.9 FPS on High settings. This relatively modest gap between Low and High at 1080p suggests the CPU is the primary limiting factor at this resolution, as the RTX 5090 has ample headroom to render frames quickly, but the Ryzen 7 5800X3D's single-thread performance constrains the overall output.

Moving to 2560x1440, the scaling pattern changes. The Low setting produces 185.8 FPS, while Medium reaches 182.3 FPS, and High comes in at 124.9 FPS. The small difference between Low and Medium at 1440p indicates the GPU is starting to become more involved, but the CPU still holds significant influence. However, the jump from Medium to High at 1440p—a drop from 182.3 to 124.9 FPS—shows that the GPU's workload increases substantially with the higher-quality settings.

At 3840x2160, the GPU becomes the dominant bottleneck. The Low preset yields 122.1 FPS, which is still very high, but the Ultra preset falls to 48.1 FPS, a dramatic reduction. The progression from Low to Medium at 4K (122.1 to 103.9 FPS) is relatively gentle, but High (70.5 FPS) and Ultra (48.1 FPS) demonstrate steep declines. This pattern indicates that Archeage's higher-tier settings at 4K impose a heavy rendering load that taxes even the RTX 5090's capabilities.

The data suggests a dual-phase scaling behavior. From 1080p to 1440p, the CPU manages to keep frame rates high, with the RTX 5090 not fully saturated until the High preset at 1440p. From 1440p High to 4K Ultra, the GPU takes over as the limiting component, with frame rates scaling almost proportionally with the pixel count increase. The 4K Ultra result of 48.1 FPS is particularly telling—it represents a 77.9% reduction from the 1080p Low result, underscoring how the GPU's rendering workload dominates at the highest resolution and settings combination.

FAQ

Q: What is the highest average frame rate achieved by this combo in Archeage?

A: The highest measured average FPS is 217.9, achieved at 1920x1080 resolution with the Low settings preset.

Q: How does the 4K Ultra performance compare to the 1080p Low performance?

A: The 4K Ultra preset delivers 48.1 FPS, which is 169.8 FPS lower than the 217.9 FPS seen at 1080p Low, representing a performance drop of over 75% when moving to the most demanding configuration.

Q: Is the CPU or GPU the primary bottleneck at 1440p Medium?

A: At 1440p Medium, the combo achieves 182.3 FPS, which is very close to the 185.8 FPS at Low. This small gap suggests the CPU is still a significant limiter, as the GPU could likely render more frames if the processor could supply them faster.

Q: What is the lowest average frame rate recorded in the measured data?

A: The lowest average FPS is 48.1, recorded at 3840x2160 resolution with the Ultra settings preset.

Q: How much performance is gained by switching from High to Low settings at 4K?

A: At 3840x2160, switching from High (70.5 FPS) to Low (122.1 FPS) yields a gain of 51.6 FPS, which is a substantial 73.2% improvement in average frame rate.

Q: Does the RTX 5090's 32 GB VRAM appear to be a limiting factor in these results?

A: The measured frame rates show no evidence of VRAM-related stutters or capacity limits at any resolution or settings combination, suggesting that the 32 GB allocation is more than sufficient for Archeage's requirements.

GPU Role

The NVIDIA GeForce RTX 5090 is built on the Blackwell 2.0 architecture with a 5 nm process node from TSMC. Its GPU operates at a base clock of 2017 MHz and a boost clock of 2407 MHz, with memory running at 1750 MHz (28 Gbps effective). The 32 GB of GDDR7 memory on a 512-bit bus provides a bandwidth of 1.79 TB/s, which is a substantial resource for high-resolution texture streaming and large scene data in MMORPGs.

In Archeage, the RTX 5090's role becomes increasingly apparent as resolution and settings escalate. At 1080p, the GPU's high pixel rate of 423.6 GPixel/s and texture rate of 1,636.8 GTexel/s are not fully utilized, as the CPU's 96 MB of L3 cache and 16 threads keep frame rates in the 180-218 FPS range. The GPU's 104.8 TFLOPS of FP32 compute power remains largely idle at these settings, as the bottleneck is elsewhere.

The 4K results show the GPU stretching its legs. At 4K Ultra, the combo drops to 48.1 FPS, indicating that the RTX 5090's 21,760 shading units are being pushed hard by the high-resolution rendering requirements. The transition from 1440p High (124.9 FPS) to 4K High (70.5 FPS) shows a 54.4 FPS drop, which is consistent with the increased pixel workload. The GPU's 176 ROPs are likely the limiting factor at 4K Ultra, as the pixel throughput demands exceed what the render output units can deliver to maintain higher frame rates.

The VRAM capacity of 32 GB does not appear to be a constraint in any measured scenario. Even at 4K Ultra, where texture detail and draw distances are maximized, the frame rates are consistent and stable, suggesting the GDDR7 memory bandwidth of 1.79 TB/s is sufficient to feed the GPU's processing units without causing memory-related bottlenecks.

How This Combo Ranks

This specific CPU-GPU combination ranks 73rd out of 1,727 tested combos in Archeage, placing it in the top 4.2% of all configurations. This high ranking reflects the strong synergy between the Ryzen 7 5800X3D's capable single-threaded performance and the RTX 5090's massive rendering throughput.

The CPU's benchmark data shows it sits in the 83rd percentile against all CPUs, with an average benchmark score of 26,574. Its nearest rivals in CPU performance include the AMD EPYC 8024P (26,555, deltaPct 0.1%), Intel Core i9-11900K (26,546, deltaPct 0.1%), and AMD Ryzen 5 7600 (26,617, deltaPct -0.2%). This means the 5800X3D is essentially performance-equivalent to these processors in general benchmarks, but its 96 MB of L3 cache may provide an advantage in games that benefit from large cache pools.

For the GPU, the RTX 5090 sits in the 94th percentile against all GPUs, with an average benchmark score of 84,306. Its nearest rivals include the NVIDIA GeForce RTX 5090 D (84,241, deltaPct 0.1%), NVIDIA GeForce RTX 5050 Mobile (84,171, deltaPct 0.2%), and AMD Radeon PRO W6600 (83,209, deltaPct 1.3%). The RTX 5090's score is 1.3% higher than the Radeon PRO W6600 but 1.6% lower than the NVIDIA CMP 40HX, indicating it is at the top tier of GPU compute performance.

The rank of 73 out of 1,727 combos suggests that while this pairing is very strong, there are 72 configurations that perform better in Archeage specifically. This is likely due to the CPU's 2022-era Zen 3 architecture being a slight bottleneck at lower resolutions, where newer processors with higher single-thread scores could push frame rates even higher. However, the overall ranking demonstrates that this combo is exceptionally capable for an MMORPG like Archeage.

Settings Recommendations

The measured data provides clear guidance for optimizing the gameplay experience. For players targeting the highest frame rates, the 1080p Low preset delivers 217.9 FPS, which is ideal for competitive play or maximizing smoothness. The Medium preset at 1080p still offers 207.8 FPS, nearly as high, with better visual quality at a minor 10.1 FPS cost.

At 1440p, the Medium preset delivers 182.3 FPS, which is an excellent balance of visual fidelity and performance. The Low preset at 1440p (185.8 FPS) offers only a 3.5 FPS advantage over Medium, making Medium the clear choice for most users. The High preset at 1440p drops to 124.9 FPS, which is still very playable but represents a significant visual quality trade-off for the 57.4 FPS loss compared to Medium.

For 4K gaming, the Low preset at 122.1 FPS is the best option for high refresh rate displays, while Medium at 103.9 FPS remains smooth. The High preset at 70.5 FPS is playable but begins to show the GPU's limitations, and Ultra at 48.1 FPS is only suitable for slower-paced exploration or screenshots. The data shows that the Medium preset at 4K provides the best balance, offering 103.9 FPS with a substantial visual upgrade over Low.

The optimal experience depends on the player's priority. For maximum smoothness at any resolution, the Low preset is the safest choice. For a balanced experience, the Medium preset at 1440p or 4K offers strong performance without sacrificing too much visual quality. The High preset is a viable option at 1440p but becomes less attractive at 4K due to the steep performance drop. The Ultra preset is best reserved for situations where frame rate is less critical than visual fidelity, as it consistently produces the lowest measured frame rates across all resolutions.