Archeage

Archeage, an MMORPG released in 2014, remains a demanding title for modern hardware, particularly due to its large-scale player interactions and complex rendering. This analysis examines the measured performance of the AMD Ryzen 7 5700G paired with the NVIDIA GeForce RTX 5090 D across three resolutions and four quality presets. The data reveals a configuration that is heavily influenced by CPU limitations at lower resolutions, while the GPU's immense power remains largely untapped due to the older game engine's constraints.

Resolution Scaling

The measured frame rates show a classic pattern of GPU load increasing with resolution, but the scaling behavior reveals a specific bottleneck. At 1080p with Low settings, the combo achieves an average of 218 FPS. Moving to 1440p Low drops this to 191 FPS, a reduction of 12.4%. At 4K Low, the average falls further to 125 FPS, representing a 34.5% drop from the 1440p figure. This scaling is not linear, and the percentage drops between each step are substantial, indicating that the GPU is becoming progressively more involved.

However, the story changes when examining the High preset. At 1080p High, the average is 181 FPS. At 1440p High, it drops to 132 FPS (a 27.1% decrease), and at 4K High, it falls to 76 FPS (a 42.4% decrease from 1440p). The much larger performance hit from 1440p to 4K on High settings compared to Low settings suggests that the increased shading and texture work at 4K High are finally engaging the RTX 5090 D more seriously. Yet, even at 4K High, the 76 FPS average is far below what this GPU is capable of in other titles, suggesting a persistent CPU limitation.

The most telling data point comes from the Ultra preset. At 1080p Ultra, the average is 134 FPS. At 1440p Ultra, it drops to 90 FPS (a 32.8% decrease). At 4K Ultra, the average plummets to 52 FPS, a 42.2% drop from 1440p. The dramatic scaling from 1440p to 4K on Ultra (a loss of 38 FPS) compared to the same resolution step on Low (a loss of 66 FPS) shows that the Ultra preset introduces GPU-intensive effects that finally create a more balanced load. The 4K Ultra result of 52 FPS is the only instance where the GPU appears to be the primary limiter, as the frame rate drops to a level consistent with a heavy GPU workload.

The data suggests that for most settings and resolutions, the AMD Ryzen 7 5700G is the limiting component. The RTX 5090 D is so powerful that it can render frames faster than the CPU can feed it draw calls and game logic updates. This is particularly evident in the small performance gap between 1080p and 1440p on Medium settings, where the average only drops from 210 FPS to 184 FPS. The CPU is holding the configuration back, preventing the GPU from showing its full potential until the resolution and preset are pushed to the absolute maximum.

CPU Role

The AMD Ryzen 7 5700G is a 5000-series processor with 8 cores and 16 threads, based on the Zen 3 architecture. Its base clock is 3.80 GHz and it can boost up to 4.60 GHz. The benchmark data for this CPU places it in the 79th percentile when compared to all CPUs, with an average benchmark score of 27051. Its closest rival, the Intel Core i9-9900K, scores 27097, a negligible difference of -0.2%, meaning the 5700G is statistically tied with that chip in general compute performance.

In the context of Archeage, the CPU's role is critical. The game is an MMORPG, a genre known for being heavily dependent on single-thread performance and CPU-bound scenarios, especially in crowded areas. The 5700G's single-thread performance, as measured by a 3dmark_single_thread score of 899 and a Cinebench R23 single-core score of 1494, is solid but not exceptional for a high-refresh-rate gaming setup. The data shows that at 1080p, the frame rates are high (218 FPS on Low), but they plateau across settings, indicating that the CPU is hitting its limit.

The 8-core, 16-thread configuration is more than sufficient for the game's threading model, but the per-core speed is what matters most. The measured results show that the CPU's maximum throughput is reached around the 210-218 FPS mark at 1080p. This is a clear indication that the Ryzen 7 5700G, while capable, cannot keep up with the RTX 5090 D's raw rendering speed. The 16 MB of L3 cache and dual-channel DDR4 memory support are adequate, but they do not provide the bandwidth or low latency that a newer platform might offer.

Comparing to its nearest rivals in the CPU benchmark list, the Ryzen 7 5700G is essentially on par with the Intel Core i9-9900K, AMD Ryzen AI 7 445, and Intel Core i5-14400T, all within a 0.6% deltaPct. This means that swapping to any of these CPUs would likely yield very similar frame rates in Archeage, reinforcing the idea that the platform itself, not the specific CPU model, is the limiting factor. The CPU's performance is the ceiling for this combo, and the GPU is waiting for the CPU to provide more work.

Settings Recommendations

Analyzing the measured FPS rows, the optimal balance of visual quality and performance is found on the Medium preset. At 1440p Medium, the combo delivers an average of 184 FPS, with a minimum of 156 FPS and a maximum of 211 FPS. This provides a smooth, high-refresh-rate experience that is well above the 144 FPS threshold for competitive play. In contrast, the High preset at 1440p drops to 132 FPS, which is still playable but loses the headroom for demanding in-game events.

For 4K users, the Medium preset is also the most sensible choice. The data shows 112 FPS average at 4K Medium, with a minimum of 95 FPS and a maximum of 128 FPS. This is a very playable frame rate for a visually demanding resolution. Moving to High at 4K drops the average to 76 FPS, which is still smooth but begins to approach the lower limits of what is comfortable for a fast-paced MMORPG. The Ultra preset at 4K, with an average of 52 FPS, is not recommended as it dips below the 60 FPS threshold.

At 1080p, the Medium preset offers an average of 210 FPS, which is excellent. However, the Low preset provides 218 FPS, which is only marginally higher. The performance difference between Low and Medium at 1080p is small (218 vs 210 FPS), suggesting that the CPU is the bottleneck, not the GPU. Therefore, for the best experience on a 1080p monitor, the Medium preset is recommended as it provides a significant visual uplift over Low for a minimal performance cost. The Ultra preset should be avoided at all resolutions due to its steep performance penalty, particularly at 4K where the average falls to 52 FPS.

How This Combo Ranks

The combo of the AMD Ryzen 7 5700G and NVIDIA GeForce RTX 5090 D is ranked 106th out of 2761 tested combos in Archeage. This places it in the top 3.8% of all configurations tested by the database. This is a strong rank, but it is important to contextualize it. The rank is achieved despite the significant CPU bottleneck identified in the data. The absolute performance is high because the RTX 5090 D is capable of brute-forcing high frame rates even when the CPU is limiting the input.

This rank of 106 out of 2761 indicates that the combination is far more capable than most systems. However, it also suggests that there are 105 other combos that perform better. Given the CPU-bound nature of the game at lower resolutions, it is likely that many of those higher-ranked combos feature CPUs with stronger single-thread performance than the Ryzen 7 5700G, even if they pair with a weaker GPU. The combo's high rank reflects the RTX 5090 D's raw power, but the data clearly shows that the CPU is preventing this from being a top-10 ranking.

The GPU's percentile ranking is 92nd out of all GPUs, with an average benchmark score of 77712. This is a top-tier component. The CPU's percentile ranking is 79th, which is respectable but not in the top tier. The combo rank being 106th out of 2761 suggests that the synergy is slightly worse than the sum of its parts, confirming that the CPU is holding back the GPU in this specific game. A more balanced pairing would likely rank higher in a CPU-bound title like Archeage.

GPU Role

The NVIDIA GeForce RTX 5090 D is a monster of a graphics card. It features 32 GB of GDDR7 memory on a 512-bit bus, providing a massive 1.79 TB/s of bandwidth. Its boost clock is 2407 MHz, and it has 21760 shading units. In benchmark tests, it scores 44065 in Passmark G3D and 310674 in Geekbench OpenCL, placing it in the 92nd percentile of all GPUs. Its nearest rivals, the AMD Radeon RX 6650M XT and RX 6850M XT, are mobile parts, and the RTX 5090 D outperforms them by 1.1% and -1.6% respectively, showing it is in a similar performance class to these high-end laptop chips.

In Archeage, the GPU's role is to render the final image. The data shows that its immense power is only fully utilized at 4K Ultra settings. The difference between 4K High (76 FPS) and 4K Ultra (52 FPS) is a 24 FPS drop, which is a 31.6% reduction. This indicates that the Ultra preset adds significant GPU-intensive effects like higher shadow quality and more complex post-processing. The fact that the GPU can still manage 52 FPS at 4K Ultra in an MMORPG is remarkable, but it highlights that the game is not designed to be a showcase for such powerful hardware.

The GPU's 32 GB of VRAM is far more than Archeage requires, and the 1.79 TB/s bandwidth is similarly overkill. However, these specifications ensure that there are absolutely no frame drops or stutters related to texture loading or memory capacity in any scenario. The GPU is never the bottleneck in this pairing until the absolute maximum settings are applied. In most tested configurations, the GPU is essentially idle, waiting for the CPU to deliver more draw calls. The data confirms that the RTX 5090 D is a future-proof component, but its capabilities are wasted in this specific combination with the Ryzen 7 5700G in Archeage.

FAQ

Q: Is the AMD Ryzen 7 5700G a good match for the RTX 5090 D in Archeage?

A: The data suggests a significant imbalance. The CPU is the limiting factor in most scenarios, capping frame rates around 218 FPS at 1080p. The GPU only becomes the primary bottleneck at 4K Ultra settings, where the average FPS drops to 52.

Q: What is the best resolution for this combo in Archeage?

A: For the best balance of visual quality and high frame rates, 1440p on Medium settings is ideal, yielding an average of 184 FPS. 4K on Medium is also viable with a 112 FPS average, but 4K High and Ultra drop to 76 FPS and 52 FPS respectively.

Q: Why is the frame rate at 1080p Low (218 FPS) only slightly higher than at 1080p Medium (210 FPS)?

A: This small performance gap indicates a CPU bottleneck. The Ryzen 7 5700G cannot process the game's data fast enough to provide the RTX 5090 D with more work, so lowering the settings from Medium to Low does not yield a significant FPS increase.

Q: How does this combo rank against other systems?

A: It is ranked 106th out of 2761 tested combos. This is a strong performance, placing it in the top 3.8% of all tested systems, but the CPU bottleneck prevents it from achieving a higher rank.

Q: Does the RTX 5090 D's 32 GB of VRAM matter for Archeage?

A: No. Archeage is not a VRAM-intensive game, and the 32 GB capacity and 1.79 TB/s bandwidth are far beyond the game's requirements. This ensures there are no texture loading issues, but it does not contribute to higher frame rates in this title.

Q: What is the main performance limiter for this configuration?

A: The AMD Ryzen 7 5700G is the main limiter. Its single-thread performance, while adequate, cannot keep pace with the RTX 5090 D's rendering speed, holding back the frame rate at every resolution except for 4K Ultra.

Measured FPS Breakdown

4K (3840x2160)

• Low: Average 125 FPS.
• Medium: Average 112 FPS, with a minimum of 95 FPS and a maximum of 128 FPS.
• High: Average 76 FPS.
• Ultra: Average 52 FPS.

1440p (2560x1440)

• Low: Average 191 FPS.
• Medium: Average 184 FPS, with a minimum of 156 FPS and a maximum of 211 FPS.
• High: Average 132 FPS.
• Ultra: Average 90 FPS.

1080p (1920x1080)

• Low: Average 218 FPS.
• Medium: Average 210 FPS, with a minimum of 178 FPS and a maximum of 241 FPS.
• High: Average 181 FPS.
• Ultra: Average 134 FPS.

The pattern across all resolutions is consistent: Medium offers the best performance-to-visual ratio, Low provides the highest frame rates, and Ultra incurs a severe performance penalty. The lack of substantial difference between Low and Medium at 1080p confirms the CPU-bound nature of the system at that resolution. The 4K Ultra result of 52 FPS is the only data point where the GPU is clearly working at its full capacity, showcasing the sheer power of the RTX 5090 D even when constrained by an older game engine.